MODEL:CAB-31753
PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT
BLUETOOTH
PORTABLE
SPEAKER
32280070302161
2017.0
8.26
17:16:3
7
+08'00'
2
DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD.This
unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make
sure it is arranged so that it will not drape over a tabletop, etc., where it can be pulled on
by children or tripped over accidentally.
WARNING: To reduce the risk of fire or electric shock, do not
liquids, such as vases, shall not be placed on apparatus.
expose this apparatus to
rain or moisture. The apparatus shall not be exposed to dripping or splashing and that
objects filled with
Before using the unit, be sure to read all operating instructions carefully. Please note that
these are general precautions and may not pertain to your unit. For example, this unit may
not have the capability to be connected to an outdoor antenna.
1. Read these instructions – All the safety and operating instructions should be read
before the appliance is operated.
2. Keep these instructions – The safety and operating instructions should be kept for
future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions
should be adhered to.
4. Follow all instructions – All operation and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water;
for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement,
or near a swimming pool.
6. Clean only with dry cloth – The appliance should be cleaned only as recommended
by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions. The appliance should be situated so that its location or position does not
interfere with its proper ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may block the ventilation
openings; or placed in a built-in installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades and a third grounding prong. The wide or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
3
12. Unplug this apparatus during lightning storms or when unused for long periods of
time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. This appliance should not be exposed to dripping or splashing water and no object
filled with liquids such as vases should be placed on the apparatus.
15. Power Sources – The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance. Do not
overload wall outlet.
16. Battery should not be exposed to excessive heat such as sunshine, fire, etc.
17. Replace remote control battery only with the same or equivalent type.
18. Do not attempt to dismantle, open or repair this product yourself. If a problem
occurs, seek advice from your local qualified service technician or contact the
distributor at the telephone number at the back of this instruction manual.
19. Caution marking and nameplate are located on back or bottom of product.
Back View
Side View
PAIR
1
2
3
4
5
6
7
8
9
1. Bluetooth (Blue LED) / AUX IN (Red LED) Indicator
2. MIC Built-in Microphone
3. Charging Indicator (Red LED)
4. PLAY / PAUSE
Receive call / Transfer call / End call
PAIR Bluetooth pairing / Disconnect Bluetooth connection
5. Volume Up / Next
6. Volume Down / Previous
7. POWER ON/OFF Switch
8. AUX IN jack
9. Charging Port
LOCATION OF CONTROLS
4
•
1. Connect the micro-USB plug into the DC IN jack on the unit.
NOTE:
2. Connect the USB plug into a USB port on a computer or a
DC 5V USB power supply device.
During charging, the indicator light on the unit will turn red.
Once the unit is fully charged, the indicator light will turn off.
•
•
•
When the battery is low, the unit will send a warning.
Charge the battery for at least 4 hours before the first time
of use.
POWER SUPPLY
5
During playing
1. Press the button to pause playback. Press again to
resume playback.
2. Press and hold the button to increase the volume,
press and hold the button to decrease the volume. You
can also adjust the volume on the device to which you
are paired.
3. Press the button to skip to the next track. Press the
button to skip to the previous track.
4. Play a track on your paired audio player or phone as normal.
2. Activate the bluetooth menu on the device you wish to connect
to the speakers. Search for the speakers and pair with the
main unit. The pairing name "CAB31753" will appear on your
device. Select this and make the connection.
slowly.
FIRST TIME PAIRING-DEVICE TO SPEAKERS
Turning the speaker on/off
1. Turn ON: Slide the ON/OFF switch to ON position. The
blue LED light will blink with an indication tone.
2. Turn OFF: Slide the ON/OFF switch to OFF position. The
LED light will turn off.
Press and hold button to disconnect from your current
Bluetooth device.
Disconnection
1. Switch on the speaker, the mode indicator will turn blue and blink.
If AUX IN cable inserted, please pull it out of AUX IN jack.
PAIR
3. After successful connection, the speaker will send a tone, the
BT/LINE indicator will blink
OPERATION
6
Notes:
• Re-dialing function is unavailable if there is no dial record
feature in your mobile phone.
• This unit will not operate or may operate improperly with
some Bluetooth mobile phones/audio players.
• If the conversation is not clear, try to move closer to the
microphone.
IMPORTANT NOTICE
Automatic OFF mode
If no operation occurs in ON mode, the unit will automatically
turn off after approx. 2 hours. To turn on the unit again, please
follow the instructions mentioned in this instruction manual.
Receiving/Dialing a Phone Call
This unit is equipped with a built-in microphone, which
allows you to make or end calls of a connected mobile
phone through this unit. Make sure your Bluetooth-enabled
mobile phone is paired with the unit. When there is an
incoming call to the connected mobile phone, you will hear
an incoming call alert tone from the unit.
1. Press the button answer the incoming call.
2. Press the button again to end call.
3. Press the button twice to reject the incoming call.
4. To transfer the sound between the unit and the mobile
phone, press and hold the button during a call.
5. To redial the last number retained in the memory of the
mobile phone, press the button twice.
7
Using the Aux in Jack
1. Slide the ON/OFF switch to ON position to turn on the unit.
2. Insert one end of Aux In cable (not included) into the Line
OUT or Headphone jack on your external audio unit and
3. Start playback of the external unit and the external audio
4.
Adjust the volume to desired level.
5. To stop playback, disconnect the Aux In cable from the Aux
In jack; the unit will switch to Bluetooth mode automatically.
the other end into the AUX IN jack of the unit, the unit will
automatically switch to AUX IN mode. The Bluetooth indi -
cator will light solid red, indicating that the unit is in AUX IN
mode.
device's output sound will be heard through the unit.
8
Should this unit exhibit a problem, check the following before
seeking service:
No Power
• Power is not on; Slide the ON/OFF switch to ON position
to turn on the unit.
• Make sure the battery is recharged.
No Sound – General
• External device’s volume is set to minimum; raise volume.
• The audio cable is plugged in. Unplug cable if not using
Aux In function.
The Bluetooth device cannot pair or connect with the
unit.
• You have not activated the Bluetooth function of your
device. Refer to the user manual of your device to activate
Bluetooth function.
• The unit is not in pairing mode. Turn off the Bluetooth
functionality of other devices that were paired with your
unit. Turn on the unit and re-enter the paring mode. If the
unit is in Aux In mode, disconnect the Aux In cable from
the Aux In jack to switch to Bluetooth mode automatically.
The unit's volume is set to minimum; raise volume.
•
TROUBLESHOOTING GUIDE
9
GENERAL
Output Power: 2x3W
Dimensions: 170x 52 x 68mm
RECHARGEABLE BATTERY
Charging voltage: DC 5V 500mA
Operating Time: Approx. 6 hours at 50% volume after fully
charged
Charging Time: Approx. 2 hours
BLUETOOTH
Bluetooth Version: V4.1
Working Distance: Up to 10 meters measured in open space
(wall and structures may affect range of device)
Specications are subject to change without notice.
This symbol indicates DC voltage
is a trademark on a registered trademark of Bluetooth
SIG Inc. All other trademarks and trade names are
those of their respective owners.
SPECIFICATIONS
10
WARRANTY CARD
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and
workmanship for the period stated above, from the date of purchase, provided that the
product is used in accordance with accompanying recommendations or instructions where
provided. This warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where possible)
for this product if it becomes defective within the warranty period. Kmart will bear the
reasonable expense of claiming the warranty. This warranty will no longer apply where the
defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre
on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer
Help at Kmart.com.au for any difculties with your product. Warranty claims and claims for
expense incurred in returning this product can be addressed to our Customer Service Centre
at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under
New Zealand legislation.
/
