2. ThermoWorks
  3. Pot Clip, Stainless Steel

ThermoWorks Pot Clip, Stainless Steel Operating instructions

  • I have reviewed the user manual for the ThermoWorks Pot Clip TX-1007X-PC. This manual describes how to mount the clip to the side of a pot, attach a probe, and monitor cooking temperatures. It also mentions that the clip is made from stainless steel and is designed for probes 0.13" dia. and smaller. I'm ready to answer your questions about this product.
  • What probe size is compatible with the Pot Clip?
    Should I use gloves when removing the clip from the pot?
    How to attach probe to the Pot Clip?
ThermoWorks, Inc.
Utah, U.S.A.
Ph: 801-756-7705
Fax: 801-756-8948
www.thermoworks.com
Follow us on:
Pot Clip
TX-1007X-PC
P-14-019-01-c
TX-1007X-PC
Pot Clip
Made from heavy duty stainless steel, the Pot Clip easily mounts to the side of any stockpot
or sauce pan. Attach the probe to the clip, mount to the side of the pot and start monitoring
temperatures. Perfect for monitoring cooking sugars or delicate sauces. The Pot Clip allows you
to continuously monitor the cooking process while keeping both hands free for other tasks.
Instructions, Tips and Cautions
• Designed for probes 0.13" dia. and smaller
• Use hot pads or gloves when removing the clip from pot. It may be hot!
• Pinch the pot clip, slide the probe through both holes.
For additional cooking tips and doneness temperatures, and to see the full line of
ThermoWorks tools, visit our website at www.thermoworks.com.
Copyright by ThermoWorks, Inc. Content may not be used in whole or in part without written consent. ThermoWorks,
and the ThermoWorks logo are registered trademarks of ThermoWorks, Inc. All rights reserved.
Technical Support
For warranty, service, and technical assistance, please contact ThermoWorks Technical Support
at (385) 330-0591 or email at techsupport@thermoworks.com.
Designed in Utah.
Assembled in China.
/