Luxor AVJ42KB User manual

Type
User manual
C x4
Pullout Keyboard Shelf Instructions
for Metal Carts
-Phillips Screwdriver
-Pliers or Adjustable Wrench
(Back)
(Front)
FR
FL
C
C
A
A
FR
FL
H
Take the top shelf of your metal cart and lay it at. Collect parts: FL,
FR, A & C. Push Screw A through the hole at the top of the shelf.
Lay bracket FL & FR on top of screw A. Take nut C and fasten with a
screwdriver and pliers, do not tighten fully until shelf is attached.
Collect parts: H. Align the pullout shelf H runner so that the runner
snaps into place into the FL & FR brackets. Pull the shelf out to
make sure it is fully seated. Tighten screws A and nut C. Pullout
keyboard shelf assembly is now complete.
www.luxorfurn.com
www.hwilson.com
08/01/13
Tools Required
Parts List
H x1
FL x1
FR x1
A x4
1
2
www.luxorfurn.com
www.hwilson.com
01/31/13
Parts List
-Phillips Screwdriver
-Pliers or Adjustable Wrench
Position the bottom shelf B so that the
caster holes are facing up. Insert caster C
into the caster holes on the bottom of shelf
B. Use a mallet to set the casters properly.
Flip bottom shelf B so that it is on its side.
Set top shelf A so that it overlaps bottom
shelf B. Align the screw holes so that the
top shelf A is at the desired height.
Insert screw D through the aligned screw hole
of A and B and fasten nut E with pliers and
screwdriver. Place Non-slip mat on desired
shelf. The cart is now complete.
1 2 3
-Phillips Screwdriver
-Rubber Mallet
-Pliers or Adjustable Wrench
AA
EE
DD
B B B
C
Adjustable Height
Metal Cart Instructions
AVJ42, W42A
Cabinet comes
pre-assembled
on units that
include a cabinet.
Non-slip mat
A x1 B x1 C x4
D x4 E x4
Tools Required
www.luxorfurn.com
www.hwilson.com
01/31/13
Parts List
A x1 B x1 C x2 D x2
Electric Assembly
Instructions
-Screwdriver
Tools Required
C
A
B
D
D
C
(Plastic or Metal
Mounting Surface)
Number of outlets
may vary.
Push screw C through electric outlet A. Make sure
the electric outlet A and cord wrap B align with the
mounting surface screw holes. Push screw C through
cord wrap B and the mounting surface screw holes.
Use wing nut D and screwdriver to fasten.
1
  • Page 1 1
  • Page 2 2
  • Page 3 3

Luxor AVJ42KB User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI