Genius NETSCROLL 100 Owner's manual

Brand: Genius

Model: NETSCROLL 100

Type: Owner's manual

This manual is also suitable for

ENGLISH

Chapter 1: Introduction

Media Player 100 is a Digital Media Player that includes a connector for an USB storage

device and Card Reader. The Media Player 100 connects to your home entertainment

center allowing you to play music, show photos and videos from the storage or card reader

on your stereo system or TV.

Package Contents

Media Player 100 Device 5V power adapter AV / Audio cable

Two AAA Batteries Remote control Multi-language user’s manual

1.2 System Requirements

z Display unit CRT / LCD with YPbPr or CVBS connector.

z No OS (operating system) or software driver installation is needed.

Chapter 2: Getting Started

2.1 Panel connectors

Check the following images for the location of the connectors on the MP-100.

Rear panel connectors

Right side storage device connectors

CONNECTOR TYPE DESCRIPTION

1 DC In 5mm, INT+, EXT-

AC adapter, power in (5V, 2 A)。

2 Pr Red RCA Jack Video output

3 Pb Blue RCA Jack Video output

4 Y / Video Out Green RCA Jack Video output / CVBS Video output

5 L / Audio Out Red RCA Audio out connect to speaker or TV AV in

6 R / Audio Out White RCA Audio out connect to speaker or TV AV in

7 USB Host

USB 2.0 host Connect to USB HDD

8 Card Reader

3 in 1 Card Reader Support SD/MMC/SM memory card.

② Pr

①DC in ③ Pb

④ Y /

Video OUT

⑤ L /

Audio Out

⑥ R /

Audio Out

⑦ USB Host

⑧ Card Reader

SD/MMC/SM

ENGLISH

2.2 Device Connections

We suggest you connect your devices first before you connect the AC adapter to an outlet.

Chapter 3: Remote Control

To use Media Player 100, aim the front of the Remote Control at the Remote Control

Receiver and press the control buttons as you would on any remote control.

3.1 Installing Batteries

Open the back cover of the remote control and insert two AAA batteries according to the

polarity (alkaline batteries recommended).

ENGLISH

3.2 Remote control functions

1. Power: Power on/Off control.

2. Mute: Volume mute or resume.

3. Picture: Go to Picture function.

4. Music: Go to Music function.

5. Movie: Go to Movie function

6. 16:9/4:3: Switch to different display ratio.

7. Turn: In Photo mode, photo rotated in clockwise direction.

8. Zoom In: Zoom in: 2x / 4x /8x

9. Play/Pause: Play / Pause the screen.

10. Stop: Stop the screen.

11.

/ : Rewind / Forward.

12. / : Previous / Next.

13. Vol +/-: Volume up / Volume down.

14. Up/Down/Right/Lift: Arrow key

15. OK: Select and Confirm button.

16. Exit: Exit or back to previous page.

17. BGM: Play/ Stop music on photo mode.

18. OSD: Control on screen display.

19. MENU: Enter Setup page.

20. Video Standard: Switch to VGA / YPbPr / AV output.

Chapter 4: Begin

4.1 How to use MENU

1. Turn on the Power, and the device will display this screen.

2. Click on “SETTINGS”

3. Use the remote to select the functions and

click “OK” button to confirm the setting.

Press the Menu button on the remote control to return to the previous menu setting page

or OK to exit from menu setting.

ENGLISH

4.2 System Setting

LANGUAGE: OSD menu language selection:

Chinese or English.

Slideshow Duration: Set Image slideshow

speed.

Slideshow Mode: Set Image slideshow type.

Music Repeat Mode: Set Music playback

time.

Movie Repeat Mode: Set Video playback

times.

Display Mode: Switch between 4:3 or 16:9

display mode.

TV system: Set TV out standard.

Default: Reset the system to default setting.

4.3 Input Device Select

1. Turn on the Media Player 100.

2. Plug-in your USB storage device or

insert your memory card, and the

screen will show the item.

3. Select it and click “OK” button.

4.4 Running the Movie Player

1. Click on the “Movie” icon. 2. Find your Movie file and click “OK” button.

ENGLISH

3. Use the remote to control the video.

4.5 Running the Music Player

1. Click on the “Music” icon. 2. Find your Music file and click “OK” button.

3. Use the remote to control the music

playback.

4.6 Running the Photo Browser

1. Click on the “Photo” icon. 2. Find your Photo file and click “OK” button.

ENGLISH

3. Click “Play” to start slide show.

4.7 Running the Text Reader

1. Click on the “TEXT” icon. 2. Find your file and click “OK” button.

3. The text will now be displayed.

4.8 Running the File Browser

1. Click on the “File” icon. 2. Find your file and click “OK” button.

ENGLISH

Chapter 5: Frequently Asked Questions

Q1. How to update the device firmware?

A1.

1. Download the latest firmware file from

our website.

2. Unzip the firmware and copy to a USB

Thumb Drive or Memory Card and plug

it into the Media Player 100 device.

Select the “USB” or “SD/MMC/MS” icon

and then press “OK“ on the Main Menu.

3. Select “File” and press “OK” to enter file

browser.

4. Use Up/Down/Left/Right keys to select

the firmware file, and then press “OK” to

update the firmware. A dialog box will

appear. Use Left/Right keys to select

“V”, and then press “OK” to upgrade

firmware.

5. Don’t do anything when upgrading the

firmware. Once it is finished, it will

reboot automatically.

Q2: How do I create subtitle files in SRT, SUB, SSA/ASS, and SMI format with ANSI

encoding?

A2: Since the Media Player 100 only supports subtitle files in ANSI encoding format, follow

these steps:

Open the subtitle file with Notepad (a

program in your Windows Operating

System), click on the Files Menu and

select the “Save As” option. Change the

Encode option to ANSI encoding and

click-on Save to proceed.

Genius NETSCROLL 100 Owner's manual

Brand: Genius

Model: NETSCROLL 100

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Genius NETSCROLL 100 Owner's manual

This manual is also suitable for

Genius NETSCROLL 100 Owner's manual

Other documents