OXO Folding Sweater Dryer Operating instructions

Sweater Dryer

INCLUDES

Straight Side Pole

Jointed Side Pole

Unfold Jointed Side Poles (A) so they are straight.

Lay netting out flat with Jointed Side Poles (A) parallel.

Note: Make sure corners are positioned smooth side

down and that the legs are on top of the mesh netting.

This ensures the bottom of the Dryer is facing up.

Insert Straight Side Poles (B) into sleeves in netting

on both sides.

Make sure legs are still on top of netting. Push down

button on corner piece and slide piece into Straight Side

Pole (B) until button pops through hole. Repeat with all

corner pieces.

Note: Slide netting closer to corners if more slack is

needed when connecting Straight Side Poles (B).

ASSEMBLY INSTRUCTIONS

OVER

www.oxo.com

Connect all four legs for stacking.

STACKING

www.oxo.com

Fold out all four legs. Flip the Dryer right side up.

Fold in all four legs and fold the Dryer in half using

the Jointed Side Poles (A).

STORAGE