Remeha Avanta Plus The New Remeha QUINTA ECO PLUS Quick start guide
- Category
- Water heaters & boilers
- Type
- Quick start guide
commercial
REMEHA QUINTA ECO PLUS
Passive Flue Gas Heat Recovery Heating and Hot Water System
QEP 65 QEP 90 QEP 115
107% efficient, 100% of the time.
How it works
The system brings together the market
leading Remeha Quinta Pro boiler with the
most advanced PFGHR technology, the ground
breaking Remeha Eco Plus.
Eco Plus recovers the hot flue gases that
normally exit the boiler straight to atmosphere
and passes them through a heat exchanger. The
recovered energy is then held in a heat store
and used to pre-heat the cold water feed.
This significantly reduces the amount of energy
required for the boiler to heat the water to the
required tem
perature, leading to major
efficiency savings.
The energy contribution from the Remeha Eco
Plus is not dependent on variable external
factors such as geographic location, weather
conditions and/or over-shading.
Each time the boiler operates energy is
recovered from the flue gases automatically
The heat exchanger and the heat store are both
constructed from stainless steel and have no
moving parts, making them virtually
maintenance free.
Tried tested and proven
The Remeha Eco Plus has been independently
tested by respected industry bodies, including
TNO and Gastec. Analysis by TUV NEL confirms
the system costs less to run, and pays back
quicker, than both stored hot water and solar
thermal systems.
The dierence between thermal and
combustion efficiency
Combustion efficiency measures the fuel to
heat transfer within the boiler.
Thermal efficiency measures the energy
delivered as useful heat by the boiler and
system combined.
The best overall appraisal of potential
equipment i
s achieved when you consider
seasonal and thermal efficiency together.
In this scenario priority should be give to the
seasonal efficiency figure as this gives the best
indication of useful energy delivered.
The Remeha Quinta Eco Plus maintains
seasonal efficiency at the maximum of 107%
NCV across all dierential temperatures.
THE REMEHA
QUINTA ECO PLUS
Groundbreaking, full time, super condensing system.
The Remeha Quinta Eco Plus (PFGHR) system improves
operational efficiency for space heating applications by up
to 11.5% of the gross energy input, delivering a seasonal
efficiency of 99% GCV (107% NCV) 82/71°C).
The latest Passive Flue Gas Heat Recovery (PFGHR)
technology ensures full time condensing is achieved
irrespective of primary circuit temperatures, making it
the perfect solution for a wide range of commercial
heating requirements.
REMEHA QUINTA ECO PLUS OVEREVIEW
Everything you need in one
simple package
The Remeha Quinta Eco Plus (PFGHR)
system includes:
• Quinta Pro boiler
• Passive Flue Gas Heat Recovery units
• Safety valve set at 3bar
• Drain valve
• Gas isolation valve
• Pre-wired pump
• Earth bonding
• Quinta Pro boiler/Eco Plus intermediate
flue header
• Combined condensate collector
Purpose made Flue Headers with vertical or
horizontal outlets are available as optional extras.
Each system contains a set number of Passive
Flue Gas Heat Recovery units depending on output.
System Output PFGHR units
Quinta Eco Plus 65kW 2
Quinta Eco Plus 90kW 4
Quinta Eco Plus 114kW 4
Packaging
The whole system is supplied on a purpose-made
pallet complete with integral ramp to enable
transport via a forklift.
The Remeha Quinta Pro boiler and Eco Plus
Passive Flue Gas Heat Recovery units are housed
in a purpose-made powder-coated frame.
Multidirectional wheels and adjustable legs make
i
nstallation, quick and easy. Levelling feet ensure
secure positioning.
The system pipe work can be pre-made and the
final connection made once the unit is in position.
WARNING: When removed from the transport
pallet and packaging, the unit should only be
moved on the multidirectional wheels on a
flat level surface and must be kept upright as
there is a tipping risk until the frame is fixed
to the floor (brackets supplied).
2
BENEFITS AT A GLANCE
Total heating and hot
water solution
Can be tailored to any number
of dierent installations
Full time, super
condensing system
Delivers seasonal efficiency
of 99% GVC 82/71°C
Industry-leading PFGHR
technology
Recovers approximately 11.5%
of gross energy input
Lower emissions and
fuel consumption
Out performs current best practice
solutions
Modular and scalable
System efficiency matches individual
building demand
Pre-configured and tested
Fast changeover from old to new,
simply wheel-in and connect
Compact, flexible design
Allows efficient use of plant space,
690(W) x 1080(D) x 1942(H)
Low cost flueing
Suitable for use with standard
uPVC flueing systems
Eligible for Carbon Trust
Loan Projects
Benefit to be advised
Enhanced Capital Allowance
(ECA) listed
Write o 100% of capital cost against
taxable profits in the first year
Wide range of applications
Choice of 65kW - 90kW - 115kW
outputs to suit allsorts of
commercial applications
Maximum seasonal efficiency
Maintains 107% NCV across all
dierential temperatures
REMEHA QUINTA ECO PLUS
REMEHA QUINTA ECO PLUS TECHNICAL INFORMATION
REMEHA QUINTA ECO PLUS TECHNICAL INFORMATION
F
K
G
J
L
H
665mm FRAME WIDTH
535mm50mm
303mm
448mm
386mm
133mm
213mm
Designation Connection Description Connection Size Connection Type
A Primary connection 35mm Compression
B Safety valve discharge ¾" Female BSP
C Boiler return 35mm Pipe
D Boiler flow 35mm Pipe
E Gas inlet 22mm Compression
F PFGHRD outlet 22mm Pipe
G System drain ½" Hose union
H Condense drain 32mm Solvent
J PFGHRD inlet 22mm Pipe
K Condensate drain point
L Appliance socket
* Flue outlet 100mm Standard flue connection
Technical discription
4
900mm FRAME DEPTH
763mm
312mm
402mm
679mm
215mm
303mm
311mm
325mm
400mm
1881mm
751mm
802mm
F
E
D
C
A
B
1940mm
Designation Connection Description Connection Size Connection Type
A Primary connection 35mm Compression
B Safety valve discharge ¾” Female BSP
C Boiler return 35mm Pipe
D Boiler flow 35mm Pipe
E Gas inlet 22mm Compression
F PFGHRD outlet 22mm Pipe
G System drain ½” Hose union
H Condense drain 32mm Solvent
J PFGHRD inlet 22mm Pipe
K Condensate drain point
L Appliance socket
* Flue outlet 100mm Standard flue connection
Technical description Passive Flue Gas Heat Recovery unit (PFGHR)
Installation and Service areas
Passive Flue Gas Heat Recovery unit (PFGHR)
278mm
400mm
285mm
Details of the PFGHR unit
Max Inlet Pressure 6* bar
Min Operating Pressure 0.2 bar
Max Flow Rate (l/min) 20 per unit
Min Flow Rate (l/min) 2.5
Connections Inlet (mm) 15
(Stainless Steel)
Connections Outlet (mm) 15 (Stainless Steel)
Casing H / W / D (mm) 278 / 400 / 285
Installation Lift Weight (kg) 15.6
(Full Weight 24)
DHW H/Exch Stainless Steel
Store & Flue Connection Stainless Steel
Casing White Paint - Steel
Condensate Store Capacity 5.5 litres
H/Exch Coil Capacity 2.7 litres
*If required fit a pressure reducing device
Min 1000mm
Front
500mm
Rear
500mm*
500mm
Top
Installation and Service areas
Details of the PFGHR unit
Max Inlet Pressure 6* bar
Min Operating Pressure 0.2 bar
Max Flow Rate (l/min) 20 per unit
Min Flow Rate (l/min) 2.5
Connections Inlet (mm) 15 (Stainless Steel)
Connections Outlet (mm) 15 (Stainless Steel)
Casing H / W / D (mm) 278 / 400 / 285
Installation Lift Weight (kg) 15.6 (Full Weight 24)
DHW H/Exch Stainless Steel
Store & Flue Connection Stainless Steel
Casing White Paint - Steel
Condensate Store Capacity 5.5 litres
H/Exch Coil Capacity 2.7 litres
*If required fit a pressure reducing device
* Only required if access to rear of unit is restricted
Passive Flue Gas Heat Recovery unit (PFGHR)
278mm
400mm
285mm
Details of the PFGHR unit
Max Inlet Pressure 6* bar
Min Operating Pressure 0.2 bar
Max Flow Rate (l/min) 20 per unit
Min Flow Rate (l/min) 2.5
Connections Inlet (mm) 15
(Stainless Steel)
Connections Outlet (mm) 15 (Stainless Steel)
Casing H / W / D (mm) 278 / 400 / 285
Installation Lift Weight (kg) 15.6
(Full Weight 24)
DHW H/Exch Stainless Steel
Store & Flue Connection Stainless Steel
Casing White Paint - Steel
Condensate Store Capacity 5.5 litres
H/Exch Coil Capacity 2.7 litres
*If required fit a pressure reducing device
Min 1000mm
Front
500mm
Rear
Side view Rear view
500mm*
* Only required if access
to rear of unit is restricted
500mm
Top
Installation and Service areas
5
commercial
54
Flue length Conventional flue
Diameter QEP 65 QEP 90 QEP 115
100mm 27m 24m 17m
Flue length Reduction per elbow used
Diameter 45° Elbow 90° Elbow
100mm 1.4m 4.9m
(PP) 100mm Plastic Flue Component detailsFlue details
NOTE : Conventional flue option only. (B23, B23P, B33)
Flue components must be CE approved. and installation must comply with current
British Standards 6644/IGUP10 and BS5440.
Vertical termination only.
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Weather plate
Part No. VE001
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Vertical terminal
MG410084862
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece vertical termination only) PU001
Standard flue header details
For flue lengths longer than details listed, please contact our Technical Department
on 0118 974 3076.
280
150
177 143
CTC 320
CTC 430
60Dn 60Dn
267
Dn100
Standard flue header details
Flue details
NOTE : Conventional flue option only. (B23, B23P, B33)
Flue components must be CE approved. Both vertical and horizontial terminations are
Flue length Conventional flue
Diameter QEP 65 QEP 90 QEP 115
100mm 40m 40m 37m
Flue length Reduction per elbow used
Diameter 45° Elbow 90° Elbow
100mm 1m 2m
For flue lengths longer than details listed, please contact our Technical Department
on 0118 974 3076.
250mm
acceptable and must comply with current British Standards 6644/IGUP10 and 5440.
terminations are utilised
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
(PP) 100mm Plastic Flue Component details
Condense Trap
No. MG410085130
Extension Piece
with sampling point
Part No. 410085129
Tee piece with
condense drain
Part No. 410085148
45 Elbow
Part No. MG410085142
90 Elbow
Part No. MG410085141
Extension Piece
250mm Part No. MG410085480
500mm Part No. MG410085481
1000mm Part No. MG410085482
2000mm Part No. MG410085484
Wall bracket
Part No. MG410071902
Air cover for
100/150 terminal
Part No. MG410075439
Vertical terminal
MG410084862
Weather plate
Part No. VE001
Horizontal terminal
Part No. MG410076332
Metal components
Extension piece1000mm MG87062
Extension piece 500mm MG87061
Extension piece 250mm MG87060
90 Elbow MG87113
45 Elbow MG87103
Wall bracket MG87193
Bird guard (termination piece
vertical termination only) PU001
7
for internal use only.
NOTE: Plastic flue
components are suitable
for internal use only.
commercial
REMEHA QUINTA ECO PLUS
TECHNICAL INFORMATION
TECHNICAL INFORMATIONREMEHA QUINTA ECO PLUS
6
7
REMEHA QUINTA ECO PLUS
commercial
REMEHA QUINTA ECO PLUS TECHNICAL INFORMATION
Quinta Eco Plus (PFGHR) with pump option DHW and unvented calorifier
Quinta Eco Plus (PFGHR) with Thermal Store/Accumulator
Quinta Eco Plus (PFGHR) via a Plate Heat Exchanger
Installation guide
Typical installations shown below do not constitute a full system design and should be used for
general concept information only, as not all components are shown. All equipment including boilers
and cylinders must be installed to manufacturer’s instru
ctions and must comply with current building
regulations. The heating and hot water schematics are also shown in our Quinta Pro Suggested
Control and Power Wiring Manual with accompanying electrical wiring diagrams. Pipework from
shunt pump to loss header to be calculated to the suit duty of the supplied pump.
Quinta Eco Plus (PFGHR) with pump option DHW
and unvented calorifier
cold water supply
balancing valve
DHW Thermostat
unvented cylinder
gas
condense
ow
return
2 port spring
return valve
HWS supply
time/temp
control
230v
supply
Installation guide
Typical installations shown below do not constitute a full system design and should
be used for general concept information only, as not all components are shown.
All equipment including boilers and cylinders must be installed to manufacturer’s
instructions and must comply with current building regulations. The heating and
hot water schematics are also shown in our Quinta Pro Suggested Control and
Power Wiring Manual with accompanying electrical wiring diagrams. Pipework
from shunt pump to loss header to be calculated to the suit duty of the supplied
pump.
8
9
thermal
store
heating circuit
gas
condense
small bor e
return
time/temp
control
230v
supply
Quinta Eco Plus (PFGHR)
via a Plate Heat Exchanger
cold water supplybalancing valve
gas
condense
return
time/temp
control
230v
supply
Quinta Eco Plus (PFGHR) with
Thermal Store/Accumulator
HWS Supply
Cold water
supply
cylinder
230v
supply
2 Port Spring
return valve
Control thermostat set to 55 c
9
thermal
store
heating circuit
gas
condense
small bor e
return
time/temp
control
230v
supply
Quinta Eco Plus (PFGHR)
via a Plate Heat Exchanger
cold water supplybalancing valve
gas
condense
return
time/temp
control
230v
supply
Quinta Eco Plus (PFGHR) with
Thermal Store/Accumulator
HWS Supply
Cold water
supply
cylinder
230v
supply
2 Port Spring
return valve
Control thermostat set to 55 c
REMEHA QUINTA ECO PLUS TECHNICAL INFORMATION
98
11
Efficiency summary
Independent tests have demonstrated that the use of Passive Flue Gas Heat
Recovery improved boiler performance in all areas of operation with no
undesirable side eects. Across the full range of tests, the Quinta Eco Plus
achieved an average efficiency of 99.5% (GCV).
This represents a significant energy saving when compared to the published
efficiency figure of 88% at 80/60°C (GCV) for the standard Quinta Pro boiler.
DHW flow rate l/m (80/60)°C All efficiencies shown in GCV
100
95
90
85
80
75
70
65
60
5
88
98.8
88
99.1
88
99.4
88
99.3
10
15
17
Quinta Eco Plus
Quinta Pro Boiler
Heating Circuit
Temperaturs
Room
Temp
Gas Rate Calorific
Value
Boiler
Output
Standing
pressure
Working
pressure
Flow
Rate
Quinta Pro
Boiler
Quinta Eco
Plus
Flow °C Return °C °C m
3
/minute MJ/m
3
kW mbar mbar l/min % Efficiency % Efficiency
80 63 20 0.167 38.8 100 20 17 5 88 98.8
80 63 20 0.167 38.8 100 20 17 10 88 99.1
80 63 20 0.167 38.8 100 20 17 15 88 99.4
80 63 20 0.167 38.8 100 20 17 17 88 99.3
Temperatures °C
Flow/Return
Efficiency
in %
80/63 98.8
80/63 99.1
80/63 99.4
80/63 99.3
53/49 99.9
53/49 99.9
53/49 99.9
80/60 99.4
Average Efficiency 99.4625
Data log for Remeha Quinta Eco Plus Passive Flue Gas Heat Recovery test
Efficiency results
11
Dry Weight
QEP 65 QEP 90 QEP 115
188kg 227kg 228kg
Shipping Weight
216kg 255kg 256kg
Weight details
REMEHA QUINTA ECO PLUSREMEHA QUINTA ECO PLUS TECHNICAL INFORMATION
Split load Quinta Eco Plus and Quinta Pro via a PHE
Split load Quinta Eco Plus and Quinta Pro with Thermal Store
10
cold water supply
balancing valve
DHW Thermostat
gas
condense
return
HWS supply
time/temp
control
230v
supply
Split load Quinta Eco Plus and Quinta Pro
with Thermal Store
Split load Quinta Eco Plus and Quinta Pro
via a PHE
thermal
store
heating circuit
gas
condense
small bor e
r
eturn
HWS Supply
Cold water
supply
cylinder
230v
supply
2 Port Spring
return valve
time/temp
control
230v
supply
Control thermostat set to 55 c
10
10
cold water supply
balancing valve
DHW Thermostat
gas
condense
return
HWS supply
time/temp
control
230v
supply
Split load Quinta Eco Plus and Quinta Pro
with Thermal Store
Split load Quinta Eco Plus and Quinta Pro
via a PHE
thermal
store
heating circuit
gas
condense
small bor e
r
eturn
HWS Supply
Cold water
supply
cylinder
230v
supply
2 Port Spring
return valve
time/temp
control
230v
supply
Control thermostat set to 55 c
10
REMEHA QUINTA ECO PLUS TECHNICAL INFORMATION
Efficiency summary
Independent tests have
demonstrated that the use of
Passive Flue Gas Heat Recovery
improved boiler performance
in all areas of operation with no
undesirable side eects. Across
the full range of tests, the Quinta
Eco Plus achieved an average
efficiency of 99.5% (GCV).
This represents a significant
energy saving when compared
to the published efficiency figure
of 88% at 80/60°C (GCV) for the
standard Quinta Pro boiler.
Quinta Eco Plus
Quinta Pro Boiler
DHW flow rate l/m (80/60)°C. All efficiencies shown in GCV
Data log for Remeha Quinta Eco Plus Passive Flue Gas Heat Recovery test
Heating Circuit Room Gas Rate Calorific Boiler Standing Working Flow Quinta Pro Quinta Pro
Temperatures Temp Value Output Pressure Pressure Rate Boiler Plus
Flow°C Return°C °C m
3
/min MJ/m
3
kW mbar mbar l/min % Efficiency % Efficiency
80 63 20 0.167 38.8 100 20 17 5 88 98.8
80 63 20 0.167 38.8 100 20 17 10 88 99.1
80 63 20 0.167 38.8 100 20 17 15 88 99.4
80 63 20 0.167 38.8 100 20 17 17 88 99.3
Efficiency results
Temperatures °C Efficiency
Flow/Return in %
80/63 98.8
80/63 99.1
80/63 99.4
80/63 99.3
53/49 99.9
53/49 99.9
53/49 99.9
80/60 99.4
Average Efficiency 99.4625
Weight details
Dry Weight
QEP 65 QEP 90 QEP 115
188kg 227kg 228kg
Shipping Weight
216kg 255kg 256kg
commercial
1110
SUPER CONDENSING
107% NCV = 82/71°C
HIGH EFFICIENCY
106.4% NCV AT 50/30°C
FULLY MODULATING
BOILER CONTROL
PREMIX BURNER
CLEAN COMBUSTION
ULTRA LOW NOx
BREEAM EXCELLENT
RECYCLABLE
MATERIALS
SUPER CONDENSING
107% NCV = 82/71°C
HIGH EFFICIENCY
106.4% NCV AT 50/30°C
FULLY MODULATING
BOILER CONTROL
PREMIX BURNER
CLEAN COMBUSTION
ULTRA LOW NOx
BREEAM EXCELLENT
RECYCLABLE
MATERIALS
SUPER CONDENSING
107% NCV = 82/71°C
HIGH EFFICIENCY
106.4% NCV AT 50/30°C
FULLY MODULATING
BOILER CONTROL
PREMIX BURNER
CLEAN COMBUSTION
ULTRA LOW NOx
BREEAM EXCELLENT
RECYCLABLE
MATERIALS
SUPER CONDENSING
107% NCV = 82/71°C
HIGH EFFICIENCY
106.4% NCV AT 50/30°C
FULLY MODULATING
BOILER CONTROL
PREMIX BURNER
CLEAN COMBUSTION
ULTRA LOW NOx
BREEAM EXCELLENT
RECYCLABLE
MATERIALS
SUPER CONDENSING
107% NCV = 82/71°C
HIGH EFFICIENCY
106.4% NCV AT 50/30°C
FULLY MODULATING
BOILER CONTROL
PREMIX BURNER
CLEAN COMBUSTION
ULTRA LOW NOx
BREEAM EXCELLENT
RECYCLABLE
MATERIALS
SUPER CONDENSING
107% NCV = 82/71°C
HIGH EFFICIENCY
106.4% NCV AT 50/30°C
FULLY MODULATING
BOILER CONTROL
PREMIX BURNER
CLEAN COMBUSTION
ULTRA LOW NOx
BREEAM EXCELLENT
RECYCLABLE
MATERIALS
Blue Efficiency
CLEANER / GREENER / SMARTER
TreadLightly
ON THE PLANET
Blue Efficiency
CLEANER / GREENER / SMARTER
TreadLightly
ON THE PLANET
Blue Efficiency
CLEANER / GREENER / SMARTER
TreadLightly
ON THE PLANET
Blue Efficiency
CLEANER / GREENER / SMARTER
TreadLightly
ON THE PLANET
commercial
The data published in this brochure is based on the latest information (at date of publication) and may be subject to revisions.It should
be read in conjunction with our full technical brochures (available on request). We reserve the right to continuous development in both
design and manufacture, therefore any changes to the technology employed may not be retrospective, nor may we be obliged to adjust
earlier supplies accordingly. The diagrams and instructions included are for guidance only. Remeha Commercial accept no liability for
any loss or damage arising from any errors or omissions that may inadvertently be contained in it. Issue 2 date: July 2013.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Remeha Avanta Plus The New Remeha QUINTA ECO PLUS Quick start guide
- Category
- Water heaters & boilers
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Remeha Avanta Plus p Series Quick start guide
-
-
-
REMEHA Hot Water Cylinder Quick start guide
-
-
-
-
-
-
Other documents
-
Danfoss S90 P Installation guide
-
Strebel SC40 User manual
-
CTC Union 380 S 40 Installation And Maintenance Instruction
-
broag SEAGOLD 1A HR User manual
-
Beyerdynamic Quinta CU User manual
-
-
-
-
-
