Xerox WorkCentre 5945/5955 User manual

Brand: Xerox

Model: WorkCentre 5945/5955

Category: Multifunctionals

Type: User manual

Services Home

Job Status

Touch Screen

Start

Clear All

Stop

Control panel

Document feeder option

Document glass option

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.1.

Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the

top left corner. Close the document feeder.

Press the 2.

Clear All button on the control panel to cancel any previous programming selections.

Press the 3. Services Home button.

Select the 4. Copy button on the touch screen.

If required, select the 5. Copy tab. This is usually the active tab when the Copy service opens.

Select any options required.6.

Enter the number of prints required using the numeric keypad on the control panel.7.

Press the 8. Start button on the control panel to scan the original.

How to make a copy

Services Home

Job Status

Touch Screen

Start

Clear All

Stop

Control panel

Document feeder option

Document glass option

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

How to send a fax

Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.1.

Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the

top left corner. Close the document feeder.

Press the 2.

Clear All button on the control panel to cancel any previous programming selections.

Press the 3. Services Home button.

Select the 4. Fax button on the touch screen.

If required, select the 5. Fax tab. This is usually the active tab when the Fax service opens.

Select the 6.

Enter Fax Number entry box and use the numeric keypad, or the touch screen keypad to enter the recipient’s

fax number.

Select the 7.

Add button.

If you want to send the document to more than one recipient enter the additional details, one recipient at a time, •

and select the

Add button again until all the recipients have been added.

Select the 8.

Close button to save the information you entered.

Select any options required.9.

Press the 10.

Start button on the control panel to scan the original.

Services Home

Job Status

Touch Screen

Start

Clear All

Stop

Control panel

Document feeder option

Document glass option

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

How to send a server fax

Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.1.

Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the

top left corner. Close the document feeder.

Press the 2.

Clear All button on the control panel to cancel any previous programming selections.

Press the 3. Services Home button.

Select the 4. Server Fax button.

If required, select the 5. Server Fax tab. This is usually the active tab when the Server Fax service opens.

Select the 6.

Enter Fax Number entry box and use the numeric keypad, or the touch screen keypad to enter the recipient’s

fax number.

Select the 7.

Add button.

If you want to send the document to more than one recipient enter the additional details, one recipient at a time, •

and select the

Add button again until all the recipients have been added.

Select the 8.

Close button to save the information you entered.

Select any options required.9.

Press the 10.

Start button on the control panel to scan the original.

Services Home

Job Status

Touch Screen

Start

Clear All

Stop

Control panel

Document feeder option

Document glass option

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

How to send an internet fax

Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.1.

Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the

top left corner. Close the document feeder.

Press the 2.

Clear All button on the control panel to cancel any previous programming selections.

Press the 3. Services Home button.

Select the 4. Internet Fax button.

If required, select the 5. Internet Fax tab. This is usually the active tab when the Internet Fax service opens.

Select the 6. New Recipient... button.

Use the touch screen keyboard to enter the e-mail address of the recipient.7.

Select the 8. Add button.

If you want to send the document to more than one recipient enter the additional details, one recipient at a time, •

and select the

Add button again until all the recipients have been added.

Select the 9.

Close button to save the information you entered.

Select any options required.10.

Services Home

Job Status

Touch Screen

Start

Clear All

Stop

Control panel

Document feeder option

Document glass option

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

How to send an e-mail

Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.1.

Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the

top left corner. Close the document feeder.

Press the 2.

Clear All button on the control panel to cancel any previous programming selections.

Press the 3. Services Home button.

Select the 4. E-mail button on the touch screen.

If required, select the 5. E-mail tab. This is usually the active tab when the E-mail service opens.

Select the 6. New Recipient... button.

Use the touch screen keyboard to enter the e-mail address of the recipient.7.

Select the 8. Add button.

If you want to send the document to more than one recipient enter the additional details, one recipient at a time, •

and select the

Add button again until all the recipients have been added.

Select the 9.

Close button to save the information you entered.

Select any options required.10.

Press the 11.

Start button on the control panel to scan the original.

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

Services Home

Job Status

Touch Screen

Start

Clear All

Stop

Control panel

Press the 1. Clear All button on the

control panel to cancel any previous

programming selections.

Press the 2.

Services Home button.

Select the 3. Print From... button on the

touch screen.

Select the 4.

Saved Jobs... button.

Select the folder required.5.

Select the saved job required.6.

Select any options required.7.

Press the 8.

Start button on the Control

Panel to print the job.

How to save and reprint jobs

Open the document to be printed. From most applications select the 1. Ofﬁ ce button or

select

File, then select Print from the ﬁ le menu.

Select the Xerox driver from the list of print drivers available.2.

Open the print driver Properties window - the method will vary depending on the 3.

application you are printing from. From most Microsoft applications select the

Properties or Preferences button to open the window.

If required, click the 4.

Printing Options tab. This is usually the active tab when the print

driver opens.

Select 5.

Saved Job from the Job Type dropdown menu.

Select the 6. Job Name entry box and use your keyboard to enter a name for your job.

Select •

Use Document Name from the Job Name dropdown menu to save your

job with the same name as the original document.

Select the folder where your job should be saved from the 7.

Save To menu.

If your required folder does not display, you can use your keyboard to enter the •

name of the folder where your job should be saved. The Default Public Folder is

available for all users to save their jobs to.

Click the 8.

OK button.

Select the option(s) required.9.

Click the 10. OK button to save your settings.

Select the conﬁ rmation button, the name will vary depending on the application you 11.

are printing from. From most applications select the

OK or Print button.

Reprinting saved jobsSaving jobs using the print driver

Services Home

Job Status

Touch Screen

Start

Clear All

Stop

Control panel

Document feeder option

Document glass option

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

How to scan to your network

Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.1.

Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the

top left corner. Close the document feeder.

Press the 2.

Clear All button on the control panel to cancel any previous programming selections.

Press the 3. Services Home button.

Select the 4. Workﬂ ow Scanning button on the touch screen.

If required, select the 5. Workﬂ ow Scanning tab. This is usually the active tab when the Workﬂ ow Scanning service opens.

Select a template type from the 6. All Templates dropdown menu.

Select the template required.7.

Select any options required.8.

Press the 9.

Start button on the control panel to scan the original.

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

Machine overview

Depending on the configuration of your

device, it is capable of the following;

Services Home

Services

Job Status

Machine Status

Touch Screen

Control panel

Machine overview

Features

Document Feeder and Document Glass

Control Panel

Paper tray 1

Paper tray 4 (optional)

Bypass tray

Finisher (optional)

Paper tray 2

Paper tray 3

Help

Numeric Keypad

Dial Pause

Cancel Entry

Language

Power

Clear All

Interrupt Printing

Stop

Start

5 6

and Xerox and Design

are trademarks of Xerox Corporation in the United States and/or other countries.

BR7341

For more information

Please refer to the user guide -

available at

http://www.support.xerox.com

Xerox

WorkCentre™ 5945/5955 Multifunction Printer

How to load paper

Open the tray.1.

Place the media in the tray. Media must be 2.

positioned against the left side of the tray.

Paper must not be loaded above the •

maximum ﬁ ll line.

Make sure that the guides just touch the 3.

paper.

Close the paper tray.4.

If the tray is set to Dedicated this is the •

end of the loading process.

If the tray is set to Fully Adjustable the •

paper tray settings will be displayed

on the screen. If the settings are

correct select the Conﬁ rm button. If

the settings are not correct change the

settings as required.

Machine overview

Paper trays 1 and 2

Open the tray.1.

Place the media in the tray. Media must be 2.

positioned against the left side of the tray.

Paper must not be loaded above the •

maximum ﬁ ll line.

Close the paper tray.3.

Paper trays 3 and 4

Make sure the tray is in the down position. For larger media, use the tray extension.1.

Place the media in the tray. Media must be positioned against the left side of the tray.2.

Paper must not be loaded above the maximum ﬁ ll line.•

Load pre-printed paper and labels face-up and with the top towards the front of the device.•

Load hole punched paper with the holes on the right.•

Load transparencies face-up. If the transparencies have a white strip load them with the white •

strip on the right.

Make sure that the paper guides just touch the paper.3.

The tray detects the position of the side guide to determine the size of the media.•

If the tray is set to Dedicated this is the end of the loading process.4.

If the tray is set to Fully Adjustable the paper tray settings will be displayed on the screen. If •

the settings are correct select the Conﬁ rm button. If the settings are not correct change the

settings as required.

Bypass Tray

Paper tray 1

Paper tray 2

Paper tray 3

Paper tray 4 (optional)

Bypass Tray

3 4

Xerox WorkCentre 5945/5955 User manual

Brand: Xerox

Model: WorkCentre 5945/5955

Category: Multifunctionals

Type: User manual

Download PDF

report

Xerox WorkCentre 5945/5955 User manual

Xerox WorkCentre 5945/5955 User manual

Related papers

Other documents