Epson 100in. Da-Lite IDEA Screen for Projection and Dry-erase Installation guide

Category
Projector mounts
Type
Installation guide

Epson 100in. Da-Lite IDEA Screen for Projection and Dry-erase is a versatile display solution that combines the functionality of a projection screen with the convenience of a dry-erase board.

With its large 100-inch diagonal viewing area, this screen provides ample space for presentations, brainstorming sessions, and educational content. The durable, matte-white surface offers excellent image clarity and color reproduction, making it suitable for both front and rear projection.

The dry-erase functionality of the IDEA Screen allows you to write and draw directly on the surface using standard dry-erase markers. This feature makes it ideal for interactive whiteboard applications, allowing multiple users to collaborate and share ideas in real-time.

Epson 100in. Da-Lite IDEA Screen for Projection and Dry-erase is a versatile display solution that combines the functionality of a projection screen with the convenience of a dry-erase board.

With its large 100-inch diagonal viewing area, this screen provides ample space for presentations, brainstorming sessions, and educational content. The durable, matte-white surface offers excellent image clarity and color reproduction, making it suitable for both front and rear projection.

The dry-erase functionality of the IDEA Screen allows you to write and draw directly on the surface using standard dry-erase markers. This feature makes it ideal for interactive whiteboard applications, allowing multiple users to collaborate and share ideas in real-time.

INSTRUCTIONS FOR
Touch Interactive Bracket Kits (Small and Large)
Tools Required for Installation Installation
1. Using the provided #4 x ½” screws and #4 nuts, attach the
touch module base plate to the bracket.
NOTE: Some touch modules will attach to the bracket with
magnets. If the touch module allows attachment using
hardware or magnets, hardware attachment is
recommended.
2. Remove the cover from the touch module. Using the screws
provided with the projection system, attach the touch
module to the touch module base plate.
3. Position the bracket with touch module along the top of the
IDEA Screen or IDEA Panoramic according to the projector
manufacturers instructions. Using the two provided #8 x ½”
screws, attach the bracket and touch module to the IDEA
frame with the touch module facing towards the audience.
NOTE: If the projector instructions do not specify a position,
center the bracket relative to the projected image. The lat
vertical surface of the touch interactive bracket should be
lush to the face of the IDEA frame.
4. Follow manufacturer’s instructions for aligning the IR curtain.
Required Hardware - Provided
Figure 1
Small Bracket Installation
Phillips Screwdriver
(2) #8 x ½” Screws(2) #4 x ½” Screws (2) #4 Nuts
NOTE: Interactive module terminology may vary from manufacturer to manufacturer.
#8 x ½" Screws
#4 x 1/2”
Screws
#4 Nuts
Screws Supplied with
Touch Module
Touch Module
Base Plate
Touch Module
1/4” Wrench
10812
Installation
1. Remove the cover from the touch module. Using the
provided M4 x 30mm screws and M4 nuts, attach the touch
module to the touch interactive bracket as shown.
NOTE: Some touch modules will attach to the bracket with
magnets. If the touch module allows attachment using
hardware or magnets, hardware attachment is
recommended.
2. Position the bracket with touch module along the top of the
IDEA Screen or IDEA Panoramic according to the projector
manufacturers instructions. Using the two provided #8 x ½”
screws, attach the bracket and touch module to the IDEA
frame with the touch module facing towards the audience.
NOTE: If the projector instructions do not specify a position,
center the bracket relative to the projected image. The lat
vertical surface of the touch interactive bracket should be
lush to the face of the IDEA frame.
3. Follow manufacturers instructions for aligning the IR curtain.
Figure 2
Large Bracket Installation
Tools Required for Installation
Required Hardware - Provided
Phillips Screwdriver
(2) #8 x ½” Screws(2) M4 x 30mm
Screws
(2) M4 Nuts
NOTE: Interactive module terminology may vary from manufacturer to manufacturer.
#8 x ½" Screws
M4 x 30mm
Screws
M4 Nuts
Touch Module
7mm Wrench
A BRAND OF MILESTONE AV TECHNOLOGIES |
www.milestone.com
P 800.622.3737 / 574.267.8101 F 877.325.4832 / 574.267.7804
E info@da-lite.com
In British Columbia, Milestone AV Technologies ULC carries on business as MAVT
Milestone AV Technologies ULC.
©2017 Milestone AV Technologies. DL0712 (Rev. 2) 06.17.
Da-Lite is a registered trademarks of Milestone AV Technologies. All other brand names or
marks are used for identiication purposes and are trademarks of their respective owners.
All patents are protected under existing designations. Other patents pending.
  • Page 1 1
  • Page 2 2

Epson 100in. Da-Lite IDEA Screen for Projection and Dry-erase Installation guide

Category
Projector mounts
Type
Installation guide

Epson 100in. Da-Lite IDEA Screen for Projection and Dry-erase is a versatile display solution that combines the functionality of a projection screen with the convenience of a dry-erase board.

With its large 100-inch diagonal viewing area, this screen provides ample space for presentations, brainstorming sessions, and educational content. The durable, matte-white surface offers excellent image clarity and color reproduction, making it suitable for both front and rear projection.

The dry-erase functionality of the IDEA Screen allows you to write and draw directly on the surface using standard dry-erase markers. This feature makes it ideal for interactive whiteboard applications, allowing multiple users to collaborate and share ideas in real-time.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI