Chipolino Kid's toy tricycle Bolide Operating instructions

Brand: Chipolino

Model: Kid's toy tricycle Bolide

Type: Operating instructions

This product is produced in accordance with requirements

of Toy safety Directive 2009/48/EC of the European Parliament and the Council,

Regulation regarding Essential Requirements and Conformity Assessment of

Toys, Regulation regarding Conformity Marking and the standards applicable

for this toy.

IMPORTANT! PLEASE READ CAREFULLY THIS INSTRUCTION MANUAL

AND KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE!

INSTRUCTION MANUAL FOR

KIDS’ TOY TRICYCLE

„BOLIDE”

FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECOMMENDATIONS IN

THIS MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT:

 CAUTION! USE ONLY UNDER DIRECT ADULT SUPERVISION!

 CAUTION! THIS TOY HAS NO BRAKES!

 CAUTION! THE TOY IS SUITABLE FOR CHILDREN AGED 1.5 YEARS AND UP AND WEIGHING

NOT MORE THAN 25 kg!

 CAUTION! DO NOT USE FOR CHILDREN OVER 25KG – DANGER OF OVERLOADING

THE TOY!

 CAUTION! BEFORE USING THE TRICYCLE, TEACH THE CHILD THE CORRECT WAY TO USE

IT AND THE SAFETY RULES.

 CAUTION! USE THE TOY ONLY FOR ITS PURPOSE.

 CAUTION! USE THE TOY ONLY DURING THE DAY ON EVEN PLAYGROUNDS AND AT A SAFE

DISTANCE FROM STREETS OR ROAD LANES FOR VEHICLES.

 CAUTION! TO AVOID THE DANGER OF INJURY ALWAYS REMOVE THE PUSH HANDLE

WHENEVER THE CHILD IS RIDING THE TOY ON HIS OWN!

 CAUTION! KEEP AWAY FROM FIRE OR OTHER HEAT SOURCES!

 ONLY adult assembly of the TOY is required!

 DO NOT allow presence of children under 3 years before assembly of the TOY is complete.

In this way, you will avoid their access to small or loose parts!

 The TOY is intended for one child at a time ONLY!

 DO NOT let other children push the tricycle!

 The TOY is NOT suitable for running or skating!

 DO NOT use the TOY if you nd missing or damaged parts.

 DO NOT let the child stand on the footrest or the seat to avoid injury.

 The child must wear shoes when using the TOY!

 DO NOT tie strings or accessories to the TOY in order to avoid the risk of suffocation.

 DO NOT place more than 0,5 kg load in the storage basket.

 DO NOT put items or luggage in the handle bar or the parent handle in order to avoid risk of injury

resulting from the TOY’s instability and tipping over!

Follow the instructions for allowed maximum presure in tires! Always before use the tricycle check

the pressure! Pressure of tires must NOT exceed 3 Bar (50 P.S.I)!

 DO NOT place items or heavy objects in the TOY or on it during storage or transportation to avoid

damage to the frame.

 DO NOT use another transport means to move the TOY by pulling it.

 DO NOT allow the child using the TOY or other children around it to touch the wheels or put items

in them.

 Use away from rivers, pools, stairs or hurdles!

 Do not make changes or modications to the TOY frame! If necessary, contact the retailer or an

authorized service center for advice and repair.

 Use only spare parts, which are approved by the producer and recommended by the distributor or

company service! The producer revokes all responsibility in case parts different from the original

ones have been used.

 Keep nylon packages away from children to avoid risk of suffocation!

CAUTION! WARNINGS!

PRODUCT FEATURES

MAIN PARTS

A G

 Suitable for children older than 1.5 years with weight up to 25 kg;

 Can be driven by the child using the pedals;

 Can be pushed by an adult and the child lays his feet on the foot rest;

 Safety bumper;

 Adjustable backrest;

 Adjustable foot rest;

 Upper foot rest;

 Adjustable canopy;

 Parking device;

 Storage basket.

This is a functional TOY whose purpose is to create in the child initial skills to coordinate its arms and

feet when riding a tricycle or bicycle.

IMPORTANT! Remove the parent handle when you are sure that the child can ride the tricycle on his

own and unaided.

necessary

tools

1 2 3 4 5 6

А Frame F-5 М6х45 Screw M Rear axle

B Front fork F-6 Bracket N-1 Mudguard

C Rear wheels G Steering bar N-2 Rod

D Front wheel H Back rest O Seat

E Push bar (bottom) I-1 Storage basket P Safety bumper

F-1 М6х30 Screw I-2 Seat pad Q-1 Parking device parts 1

F-2 М6 Cap nut J Push bar (top) Q-2 Parking device parts 2

F-3 6 mm Shim K Canopy

R Upper foot rest

F-4 Screw L Lower foot rest

ASSEMBLY AND MOUNTING

1. Insert the front fork (B) to the front

wheel (D).

IMPORTANT: Please pay attention to

the correct position of the front fork to

the frame!

2. Fix with a (М6x30) screw, 6mm shim

and М6 Cap nut

step 1

step 2

necessary tools

g. 1

g. 2-2

3. Place the mudguard (N) onto the front

fork. Note that the shorter side of the

mudguard must face forward, and the

longer one – face the frame. Push care

fully down until the mudguard touches

the shoulders of the front fork (g.2-2).

4. Align the front tube of the frame (A)

with the front fork. Position the convex

part of the mudguard to the slot in the

frame as shown in g.2-2.

F-1

N-1

F-3 F-2

5. Place the parking device parts 2 (Q-2)

to the rear tubes of the frame A (g.3).

6. Place the parking device parts 1 (Q-1)

to the rear tubes of the frame C (g.3).

7. Place each of the rear axles (M) on to

the rear wheels as shown on g.3.

8. Put the assembled rear wheels on to the

rear tubes of the frame and the already

assembled brake parts 2.

9. Fix the rear wheels to the frame with

cap nut F-2.

10. Remove the screw from the steering

bar (G).

11. Put the stem of the handle bar on to the

tube of the frame so that the openings in

the tubes of the handle bar and the

frame will match (g.4)

12. Fix with a screw.

g. 3

g. 4

g. 5

necessary

tools

necessary

tools

necessary

tools

step 2

step 3

step 1

step 4

Q-1

Q-1 Q-2

F-4

F-5

I-2

CМ

13. Fig. 5 – Step 1:

Remove the screw, nut and plastic ends of the lower foot rest (L). Put the lower foot rest on to the

respective place in the tube of the frame so that the openings in the foot rest and the frame will

match. Fix with the plastic ends, screw and nut.

14. Fig. 5 – Step 2:

Put the upper foot rest (R) on to the respective place in the tube of the frame so that the openings

in the foot rest and the frame will match. Fix with a screw (F-4).

15. Fig. 5 – Step 3:

Remove the bracket (F-6) from the harness of the seat pad (I-2). Insert the harness through the

upper parts of the seat (О), after that put back the bracket of the (F-6).

16. Fig. 5 – Step 4:

Attach the seat to the respective spot on the frame and x with a М6х45 screw.

17. Insert the tube of the left bottom push bar (Е) in the opening in the frame tube under the

seat (g.6).

18. Insert the tube of the backrest (H) in the opening in the bottom part of the push bar (g.6).

19. Insert the tube of the right bottom push bar (Е) in the opening in the frame tube under the

seat (g.6).

20. Insert the tube of the backrest (H) in the opening in the bottom part of the push bar (g.6).

21. Fix with a screw (N-2), as shown in g.6.

22. Remove the brackets (F-6) from both ends of the harnesses (at the back side of the backrest) Slide

the harnesses through the respective openings in the tubes of the bottom pushbar, after that put

them back the brackets on the harnesses as shown in g.6.

g. 6

necessary

tools

N-2

F-6

1 2

23. WARNING! When assembling the upper push bar (J) the pins must remain at the back side of the

frame (g.7 – Step 1). Lift up the plastic lever located on the tubes of the bottom push bar. Insert the

tubes of the upper push bar (J) on to the openings in the tubes of the bottom push bar. Push down

the plastic lever to tighten (g. 7 – step 1).

24. Open the plastic brackets of the canopy (K). Place the canopy on the tubes of the bottom push bar

and close the brackets (g.7 – Step 2). To remove the canopy, open the two brackets.

25. Place the storage basket (I-1) on to the rear side of the frame. Fix it with the buttons on the side

tubes of the push bar as shown in g. 8-1 and g. 8-2.

ATTENTION! Do not place more than 0.5kg load in the storage basket. Overloading will disturb the

balance and endanger the safety of the child in it!

g. 7

g. 8

step 1

the pins

are located

at the back

side

step 2

FUNCTIONS

The foot rest can be retracted to the frame by push-

ing the button and moving the foot rest up until you

hear a click and it is xed (g. 9).

To use the foot rest, press the pin and move it down

until you hear a click and it is xed. Open the two

ends of the foot rest as shown in g. 9.

When you push the tricycle, use the foot rest open,

when the child drives the tricycle, close the foot rest

up to the frame.

The tricycle has braking devices, which block the

two rear wheels and the movement of the tricycle.

Press with foot each if the two pedals on the rear

wheels (g.10) to block the movement of the

tricycle.

Lift the pedals with your feet to release the braking

devices.

The tricycle has a function of blocking the pedals.

This prevents the risk of injuring the child’s feet

when the tricycle is pushed by an adult.

Turn the pedal blocking button to the position shown

on g.11 “locked” to block the pedals.

Turn the button in position “unlock” (g.11) to re-

lease the pedals.

WARNING! Always engage the braking devices when the tricycle is not moving! Do not leave the tricycle

on sloped surface when there is a child, even if the braking devices are engaged.

WARNING! Engage the braking device whenever putting the child in or taking it out of the

tricycle!

g. 9

g. 10

g. 11

locked

unlocked

g. 12

g. 13

The back rest can be adjusted in several positions by means of a mechanism on the back (g. 12-1).

To lower the back rest, press with ngers the buckle on the mechanism (g. 12-2) and pull the buckle

down. Release the buckle to x into the desired position.

To lift the backrest, take both ends of the harness, press the buckle with ngers and move it up (g.12-3)

to the desired position. After that release the buckle to x the chosen position.

WARNING! You must not adjust the position of the backrest while there is a child in the tricycle. In case

you decide to change the position of the back rest while the child is in the tricycle, the child shoul by no

means lean on the back rest!

The canopy can be closed or opened by means of the

levers in its both ends.

To open the canopy pull it and press both levers down

(g. 13).

To close the canopy, pull both levers up.

MAINTENANCE GUIDELINES

 Periodically check the good working order of the tricycle parts.

 Do not wash the TOY and do not soak the TOY in water. Use a soft damp cloth and water or neutral

liquid detergent.

 Do not use aggressive detergents, containing abrasive particles, ammonia, bleach or spirits.

 Regularly oil the moving parts.

 Do not use on sand.

 Do not store the TOY in hot environment or near strong sources of heat, in order to avoid the plastic

parts from deforming.

 Store the TOY in clean and dry place indoors. Do not expose to direct sunlight, rain, high

temperature intervals, moisture or harsh weather!

 Always let the TOY to dry out fully before storing or using it, in order to avoid mold and rust.

 Contact your authorized dealer if consultation or repair is needed.

Materials used: plastic, metal, textile.

TRKBLD02xxxxx /698

Fig. 14 shows the assembled tricycle, which can

be pushed by the adult.

The push bar and the foot rest can be removed

and child can drive the tricycle alone.

Fig. 15 shows the tricycle which the child can

drive.

WARNING! Remove the push bar when you are completely condent that the child can drive the tricycle

unaided!

g. 14 g. 15

Bulgaria, Plovdiv, Str. Golyamokonarsko shosse № 1

www.chipolino.com

Chipolino Kid's toy tricycle Bolide Operating instructions

Chipolino Kid's toy tricycle Bolide Operating instructions

Chipolino Kid's toy tricycle Bolide Operating instructions

Related papers

Other documents