SCS DWS SERIES Installation And Operating Instruction Manual

Brand: SCS

Model: DWS SERIES

Category: Camera accessories

Type: Installation And Operating Instruction Manual

Page is loading ...

DWS SERIES

VIDEO SECURITY SYSTEM

Installation and Operating Instruction Manual

Model: DWS

This manual should be retained for future reference

CONTENTS

INTRODUCTION ....................................................................................................... 17

IMPORTANT SAFETY

PRECAUTIONS

.................................................... 17

KIT

CONTENT ........................................................................................................... 19

SAFETY AND INSTALLATION

TIPS ..................................................................... 20

Camera Installation6

Setting the Camera Channel (optional) ......................................................... 22

Pairing the Camera to Receiver (optional) .................................................... 22

GETTING TO KNOW YOUR

CAMERA ................................................................. 23

CONFIGURING YOUR VIDEO

RECEIVER

.......................................................... 24

Camera

Pairing

.............................................................................................. 24

Camera Brightness Adjustment ..................................................................... 25

Camera Activation ........................................................................................ 25

TROUBLE

SHOOTING ..............................................................................................

ABOUT DIGITAL WIRELESS

TECHNOLOGY .................................................... 28

PRODUCT SPECIFICATION

.................................................................................... 29

WARRANTY DECLARATION ............................................................................. 32

INTRODUCTION

IMPORTANT SAFETY PRECAUTIONS

Damages caused by non-compliance with this operating manual will void the warranty!

We will not assume any liability for damages to items or persons caused by improper

handling or non-compliance with the safety notices! Any warranty claim will be null and

void in such cases.

1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be

voided.

2. Avoid all contact with water, and dry hands before using.

3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.

4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so

may damage the camera or cause camera temporary malfunction.

5. Use the devices with care. Avoid pressing hard on the camera body.

6. For your own safety, avoid using the camera or power off the camera when there is a

storm or lightning.

7. Remove the power adapter during long periods between usages.

8. Use only the accessories and power adapters supplied by the manufacturer.

9. To meet the regulations pertaining to parental responsibility, keep the devices out of

the reach of infants.

10. Check power cables, do not get crushed or damaged by sharp edges whenever the

devices are in operation.

FCC Compliance Statement: This

device complies with Part 15 of the

FCC rules. Operation is subjected

to the following two conditions: (1)

this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Products with CE Marking comply with

EMC Directive (2004/108/EC); Low

Voltage Directive (73/23/EEC);

R&TTE(1999/5/EC); ROHS Directive

(2011/65/EU) issued by the Commission of the

European Community. Compliance with these

directives implies conformity to the following

European Norms:

EMC: EN 301 489

LVD: EN 60950

Radio: EN 300 328

FCC/CE WARNING

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part

15 of the FCC rules and ETSI(EN) 300328. These limits are designed to provide reasonable protection against

harmful interference in residential installations. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does interference to radio or television equipment reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures: -Reorient or relocate the receiving antenna.-Move the

equipment away from the receiver.-Plug the equipment into an outlet on a circuit different from that to which

the receiver is connected.-Consult the dealer or an experienced radio/television technician for additional

suggestions. You are cautioned that any change or modifications to the equipment not expressly approved by

the party responsible for compliance could void your authority to operate such equipment.

DISPOSAL

If the camera system no longer functions or can no longer be repaired, it must be disposed

of according to the valid statutory regulations. Disposal of spent batteries/accumulators:

You are required by law (Battery Ordinance) to return all spent batteries and accumulators.

Disposing of spent batteries/accumulators with common household waste is prohibited!

Batteries/accumulators that contain hazardous substances are marked with the symbols on the side. These

symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The

abbreviations for the respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return

spent batteries and accumulators that can no longer be charged to the designated collection points in your

community, outlets or wherever batteries or accumulators are sold. Following these instructions will allow

you to fulfill the legal requirements and contribute to the protection of our environment!

KIT CONTENT

A Digital Wireless Camera x 1 B Camera Stand x 1

C Camera Antenna x 1 D 5V/1A Power Adapter

E Screw Pack x 1 F Manual x 1

Tools Required:

Electric drill

5mm masonry drill bit

15mm masonry drill bit

No. 2 Philips screwdriver

SAFETY AND INSTALLATION TIPS

Do not attempt to open the units with the power adaptor plug connected to avoid any risk

of personal injury.

When installing CCTV camera(s), always follow manufacturer's advice when using power

tools, steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles)

when drilling holes. Before drilling holes through walls, check for hidden electricity

cables and water pipes. The use of cable/pipe detector is advisable.

It is also advisable to avoid exposing any cameras to extreme weather conditions (e.g,

under a gutter which is prone to any water leaks). When installing any cameras with this

unit, it is advisable to use cable conduit to protect any video/power extension cables from

being exposed externally and to prevent/reduce the chances of the cables being tampered

with. After drilling any hole though an external wall for a cable, ensure the hole is sealed

up around the cable using a sealant to prevent drafts.

To prevent a fire or electrical shock hazard, do not attempt to open the housing while the

unit is exposed to rain, water or wet conditions. There are no user serviceable parts inside.

Refer servicing to qualified service personnel. Avoid pointing the camera(s) directly at the

sun or any bushes, tree branches or moving objects that might unnecessarily cause the

receiver to record due to winds for example. System also provides the "Masking" function.

User may screen out motion detection area in parts of the picture which motion detection

is not required.

Night Vision

The camera has built-in infra-red LEDs to allow you to view at night for 24hrs

surveillance. The LEDs will automatically activate at night and the picture viewed will

turn to black and white. The night viewing range is up to 7 meters.

Camera Installation

Avoid positioning the camera so that it is facing directly at the sun as this will impair

the picture quality viewed.

Avoid pointing the camera lens directly through clear glass as the night vision

LEDs will cause a blurred image at night.

Avoid pointing the camera directly at any bushes, tree branches or moving objects that

might naturally move due to winds. This is also because if you need to use the motion

detection feature in the PC software to record movement the software might record

unnecessarily.

Secure camera stand on the wall

Loosen up the Thumb screw

Adjust proper view angle then secure the joint with

T-bolt.

Setting the Camera Channel (optional)

The wireless camera is supplied preset to channel 1.

The monitor supports up to 4 cameras. Follow the steps below in Camera Setup section to

setup or change the monitor channel of the camera. If you are adding another camera to

link with the supplied monitor in this kit, then ensure its channel is set to a different

channel to the existing camera(s).

Pairing the Camera to Receiver (optional)

Follow the steps in Camera Setup section to setup or change the channel of the camera. If

you are adding another camera to link with the supplied monitor in this kit, then ensure its

channel is set to a different channel to the existing camera(s).

Note:

If the camera is located within 1m to 1.5m from the monitor and the camera's volume on

the receiver is turned on, then you may hear a whistling noise on the monitor which is the

feedback picked up by the microphone. In this case please locate the camera further away

from the monitor to prevent this noise.

If the power connection to the camera is kept outdoors, ensure the connection is suitably

protected.

GETTING TO KNOW YOUR CAMERA

CONFIGURING YOUR VIDEO RECEIVER

CAMERA SETUP

1. Select CAMERA SETUP, press the MENU button to enter sub-menu.

2. Use ▼▲ to select the camera to set up (camera 1-4).

3. Use ◄► to select the sub-menu [CAMERA PAIRING] [BRIGHTNESS] [CAMERA

ON/OFF]

Camera Pairing

Your camera is paired to the monitor at

the factory to channel 1.

To add new camera(s) to your system,

you have to pair it to the different

channel(s).

1. With the PAIRING option highlighted, press the MENU button once to begin

camera pairing.

2. The pair LED on camera will blink once and following with LED blinking

continuously to indicate data transmission in progress. Press and release the pairing

button on the camera once quickly.

The System will confirm pairing process to be successful with "PAIRED"

displaying on screen, and indicate pairing process failed with "PAIRING FAIL."

Repeat the camera pairing process if you want to add more cameras to the receiver.

3. Press ESC to return to MAIN MENU or press ▼▲ to select another camera to

continue the camera pairing process.

Camera Brightness Adjustment

1. With IMAGE RIGHTNESS option highlighted, use ▼▲ to adjust camera brightness

from OFF, LOW, MEDIUM to HIGH. Press the MENU button once to confirm.

2. Press ESC to return to MAIN MENU or press ▼▲ to select another camera.

Camera Activation

1. With ACTIVATION option highlighted, use ▼▲ to enable or disable the camera(s).

Press the MENU button once to confirm.

2. Press ESC to return to MAIN MENU or press ▼▲ to select another camera.

NOTE: Make sure camera(s) paired is enabled for SCAN or QUAD to function properly

(camera "ON" can only be selected when camera has been paired to system.).

TROUBLE SHOOTING

IF…

SOLUTION

No image appears

‧ Make sure the power adaptor is not damaged or

defective and plugged into an electrical outlet with

power.

‧ Make sure the receiver has enough charge

‧ Make sure the camera is powered on.

‧ Relocate the camera/ receiver to obtain the best

reception of wireless signals.

‧ Make sure the camera is properly paired to the receiver.

‧ Check the displaying channel is the one paired with the

camera. If not, use the direction button to switch to the

correct channel.

‧ Press the Menu button on the receiver to exit the system

idle mode and go back to the main screen.

Low wireless signal

Low frame rate

Image is choppy

‧ Wireless devices such as wireless home stereo system

may reduce the signal strength. Leave as much space as

possible between the camera(s)/receiver and these

wireless devices.

‧ Flip the antenna of the receiver to obtain the best

reception of wireless signals.

‧ You can also purchase accessory range extender

antennas to increase the range of your wireless signal.

Poor picture quality

‧ Move closer the camera(s) and receiver to ensure the

appropriate wireless range.

‧ Remove the obstacles between the camera(s) and

receiver.

‧ Clean the camera lens using lens cleaning cloth. Spots

or dust on the lens can also cause image quality

problems.

Motion detection is not

working

‧ Confirm the motion detection has been correctly set up

or scheduled.

‧ Adjust the sensitivity of the motion sensor (see page of

your monitor notice p43).

The recording doesn’t

work as scheduled.

‧ Make sure correct DATE AND TIME has been

correctly set.

‧ Make sure the Record Schedule has been setup

correctly.

‧ Make sure the memory card is inserted and formatted.

‧ In motion detection mode, a moving object within the

camera viewing angle is necessary to trigger the motion

sensor for recording.

Unable to pair the camera

to the receiver

‧ Make sure the camera and the receiver are powered on.

‧ Press and release the pairing button on the camera once

quickly. Do not press and hold.

‧ Power off the receiver and restart. If power button does

not work, use a pin to press the reset button.

Bright white spots appear

at night time

‧ The camera's infrared LEDs produce invisible light that

reflects off surfaces such as glass. Install the camera on

the other side of windows or place the lens flush against

the surface to improve the night vision. It is suggested

to install camera(s) under well lit area.

Note: Please check the environment rating (Ingress) of

the camera(s) before installing outdoors.

Memory card error

‧ Make sure the memory card is correctly inserted and

formatted.

‧ Use the provided memory card within the package to

ensure proper operation.

Note: Please backup the data before formatting. Format

function will delete all the data on the memory card.

Wrong data and/or time is

shown.

‧ Wrong date and/or time will result in unexpected record

schedule. Please refer to page 46 of your monitor

notice to configure correct system date/time.

More cameras are added

but not all of them show

images on the receiver

‧ Make sure all cameras are properly paired (see page

Of your monitor notice p42).

‧ Make sure all cameras are properly activated (see page

Of your monitor notice p42).

‧ Follow the solution of ‘No image appears’ to ensure

best reception of wireless signals.

ABOUT DIGITAL WIRELESS TECHNOLOGY

This section offers some helpful information to solve most of the problems you may

encounter. We hope this section can help you to enjoy a pleasant setup.

About 2.4GHz Digital Wireless Signal

This innovative digital wireless solution integrates advance Frequency Hopping Spread

spectrum (FHSS) technology. This technology greatly reduce the interference that comes

from other devices using the same radio frequency (2.4GHz), e.g. WIFI, Bluetooth,

Zigbee, cordless phone...etc. You now can enjoy a more pleasant wireless surveillance

quality without flicking and noisy image. However, weaker signal (lag or still image) can

be observed yet from time to time, depending on the environment where the system is

installed. Complied with FCC part 15.247,ETSI(EN)300 328, audio / video signals

transmitted out about or over 500 foot / 150meter in line of sight should be supported.

Line of sign installation, though, is usually not a common practice. Factors affecting

transmission include microwave ovens or other high frequency electromagnetic waves.

Reinforced concrete walls, large scale metal products and metal furniture should not be

located near the camera or the receiver. Water creates an obstacle and should not

placed near. Human bodies such as a person passing through may cause unstable signal

quality

How to improve the wireless signal quality?

If possible, remove obstacles in between camera and receiver that might reflect the signal.

These could include furniture, cabinets, and walls. If you feel the wireless signal is not

improvement, please relocate the camera closer to the receiver.

Why Image Compression?

In order to provide a private and interference free wireless service, this digital wireless

solution works on a 2Mb narrow hopping band. Different from traditional 2.4GHz analog

signal, this digital wireless signal is compressed and presented as Motion JPEG (MJPEG)

format. By digitalizing and compressing the raw analog data, the bandwidth is used more

efficiently and securely. Consequentially, you might observe an indent image line on a

larger display receiver or plasma TV.

PRODUCT SPECIFICATION

Communication Range

150 meters in open space

Receiver Resolution

800 X 480

Camera Resolution

640 X 480

Operating Temperature

-10°C ~ 50°C

Operating Voltage

DC 5V / 1A

Current Consumption

550mA(max)

Night Vision

5 meters

Dimension

123 x 65 x 65 mm

Page is loading ...

Purchase location

City : .............................................................................. ZIP CODE : ............................................

Batch number (close to gencod location) : .............................................................................

You

Name : ........................................................... Surname : ...........................................................

Phone : .................................................. Email : ...........................................................................

City : .............................................................................. ZIP CODE : ...........................................

Installation by

Person Company

Name : ................................................................................... ...........................

ID code : ..........................................................................................................

SENTINEL

WARRANTY DECLARATION

RefLead Time

Product name : DWS additional camera

TO BE SEND AT LEAST 1 MONTH AFTER PURCHASING

SCS Sentinel - Service SAV - Rte de St Symphorien - BP 69

85130 LES LANDES GÉNUSSON (France)

or directy on our website

www.scs-laboutique.com

2 YEARS DWS CAM

SCS DWS SERIES Installation And Operating Instruction Manual

Brand: SCS

Model: DWS SERIES

Category: Camera accessories

Type: Installation And Operating Instruction Manual

Download PDF

report

in other languages

français: SCS DWS SERIES

SCS DWS SERIES Installation And Operating Instruction Manual

SCS DWS SERIES Installation And Operating Instruction Manual

in other languages

Related papers

Other documents