2. Computers & electronics
  3. Data input devices
  4. Gaming controls
  5. Trust
  6. Sight Fighter Vibration Feedback
Sight Fighter Vibration Feedback

Trust Sight Fighter Vibration Feedback Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Trust Sight Fighter Vibration Feedback Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Trust Sight Fighter Vibration Feedback & Predator QZ 500
1
GB
TRUST SIGHT FIGHTER
VIBRATION FEEDBACK
&
PREDATOR QZ 500
Quick installation manual
Version 1.0
Trust Sight Fighter Vibration Feedback & Predator QZ 500
2
1. Introduction
This manual is intended for users of the Trust Sight Fighter Vibration Feedback and the Predator
QZ 500. Prior knowledge is not necessary to install this product.
This instruction manual describes how to install the software and how to solve problems that may
be encountered during the installation.
A detailed manual for this product is contained on the CD-ROM. See chapter 4 for instructions on
how to read this manual.
2. Safety
2.1 General information
1. Do not use this equipment in humid environments, such as bathrooms, humid cellars,
swimming pools etc.
2. Never stick objects into the slots on the outside of the device, because you may touch live
components. This may cause a fire or give you an electric shock.
3. Do not try to repair this device yourself. When you open or remove the casing, you may
accidentally touch live components. There are also other risks.
4. If any of the following conditions apply, disconnect the power plug from the mains and
have the equipment serviced by qualified service personnel:
a) The power lead or the plug have become damaged or worn.
b) Liquid has entered the equipment.
c) The equipment has been dropped and/or the casing has become damaged.
5. Place the equipment so that the cables cannot be damaged.
3. Quick installation
3.1 Installation in Windows 98
Note: You should install the software before connecting the Trust Sight Fighter
Vibration Feedback or the Predator QZ 500 to the USB port.
Note: To use your game pad or joystick, DirectX 6.0 (or higher) must be installed
onto your system before installing the game pad or joystick. This is included
on the CD-ROM.
1. Start Windows 98.
2. Insert the CD-ROM into your CD-ROM drive.
3. Select 'Run' from the Start menu.
Trust Sight Fighter Vibration Feedback & Predator QZ 500
3
GB
4. Type [D:\SETUP.EXE] and click on ‘OK’ (see figure 1) to start the Trust Software Installer.
Figure 1: Starting set-up
5. Select the language you wish to use. Figure 2 will appear.
Figure 2: Trust Software Installer
6. Select ‘Install Trust Digital Center’.
7. Follow the on-screen instructions.
8. Restart your computer after installing the software.
9. Insert the USB plug into a free USB port on your computer.
10. Windows 98 will detect new hardware and will automatically install the necessary driver.
Note: It is possible that you will receive a warning message saying that some files
being copied to your system are older than the existing ones (joyhid.vxd en
vjoyd.vxd). Click on ‘Yes’ to save the present files.
Your Trust Sight Fighter Vibration Feedback or Predator QZ 500 is now ready for use.
A more detailed description of the installation and the use of this product can be found in the
instruction manual included on the CD-ROM. See chapter 4 for more information. If necessary,
also refer to your computer's instruction manual.
Trust Sight Fighter Vibration Feedback & Predator QZ 500
4
3.2 Installation in Windows 2000
Note: Windows 2000 does not support the programming of fire buttons. It is,
therefore, not possible to install the Trust Digital Center program in Windows
2000.
Windows 2000 does, however, support standard USB game pads and joysticks. Follow the
instructions below for the installation:
1. Start Windows 2000.
2. Insert the USB plug into a free USB port on your computer.
3. Window 2000 will detect new hardware and automatically install the game pad or joystick
as a 'USB Human Interface Device'.
The Trust Sight Fighter Vibration Feedback of Predator QZ 500 is now ready for use.
Note: The Trust Sight Fighter Vibration Feedback's vibration function is not
available in Windows 2000.
4. Acrobat Reader
4.1 Reading the electronic manual
1. Start the Trust Software Installer.
2. Select 'Read manual'.
3. Select the language you wish to use to read the manual.
4. The manual will be displayed on the monitor.
4.2 Printing the manual
1. Click on 'Print' in the 'File' menu (see figure 4).
Figure 4: Opening the file
2. Change any settings you wish to alter.
3. Click on 'OK' to print the document.
Trust Sight Fighter Vibration Feedback & Predator QZ 500
5
GB
5. Troubleshooting
Problem Cause Possible solution
The USB connection does not
work.
Activate the USB
connection (see the
computer's instruction
manual).
The game pad/joystick on
the USB port is not detected
after it has been connected.
Windows 98 or higher is not
used.
USB only works with
Windows 98 or higher.
The game pad/joystick has
not been connected correctly.
Connect the game
pad/joystick correctly to the
USB port.
The game pad/joystick does
not react during use.
The USB port has not been
installed correctly.
Remove the USB port from
the device manager and
reinstall it.
The Trust Sight Fighter
Digital Center program does
not work in Windows 2000.
Windows 2000 does not
support the programming of
fire buttons.
Use the standard Windows
2000 driver. See chapter
3.2.
The computer becomes
jammed or parts of the
computer do not work any
more if the game pad is
connected to the USB port.
The USB connection has
shared interrupt with other
devices.
Give the USB connection a
unique number. See your
computer's instruction
manual.
Also see the 'Troubleshooting' chapter on the electronic manual (chapter 4 – Acrobat Reader).
Check the FAQ's on the Internet (www.trust.com).
If you still have any problems after trying these solutions, please contact your dealer or call the
Trust Helpdesk.
/