Silvercrest 289484 Operation and Safety Notes

CHARGING AND

DATA CABLE

IAN 289484

LADE- UND DATENKABEL

Bedienungs- und Sicherheitshinweise

CHARGING AND DATA CABLE

Operation and Safety Notes

LADE- OG DATAKABEL

Brugs- og sikkerhedsanvisninger

CÂBLE DE CHARGE ET

SYNCHRONISATION

Instructions d‘utilisation et consignes de sécurité

LAAD- EN DATAKABEL

Bedienings- en veiligheidsinstructies

CHARGING AND

DATA CABLE

GB / IE / NI Operation and Safety Notes Page 5

DK Brugs- og

sikkerhedsanvisninger Side 26

FR / BE Instructions d‘utilisation et

consignes de sécurité Page 47

NL / BE Bedienings- en

veiligheidsinstructies Pagina 71

DE / AT / CH Bedienungs- und

Sicherheitshinweise Seite 94

3

1

2

4

5

6

7

5 GB/IE/NI

List of pictograms

used and warnings ................Page 6

Introduction .................................Page 6

Intended use ...................................Page 7

Warnings and symbols used .........Page 7

Trademark notice ........................... Page 9

Scope of delivery ........................... Page 9

Before use.......................................Page 9

Parts description ............................. Page 10

Technical data ................................Page 10

Safety notices.............................Page 11

Operation and use .................Page 15

Charging the power bank ............. Page 15

Checking the battery status ........... Page 17

Charging mobile devices with

the power bank ..............................Page 18

Data transfer ..................................Page 19

Usage as a charging cable ...........Page 19

Troubleshooting ....................... Page 19

Cleaning and care ................... Page 21

Storage during non-use ......Page 22

Disposal .........................................Page 22

Note to Declaration of

conformity .................................... Page 24

Warranty ......................................Page 24

6 GB/IE/NI

List of pictograms

used and warnings

Read the instructions!

Direct current

Observe caution and

safety notes!

Caution!

Explosion hazard

Wear suitable

protective gloves

Charging and Data Cable

Introduction

We congratulate you on the purchase

of your new product. You have chosen

a high quality product. The instruc-

tions for use are part of the product.

They contain important information

concerning safety, use and disposal.

Before using the product, please

familiarise yourself with all of the

safety information and instructions

7 GB/IE/NI

for use. Only use the product as de-

scribed and for the speciﬁed appli-

cations. If you pass the product on

to anyone else, please ensure that

you also pass on all the documenta-

tion with it.

Intended use

This product is an IT device which is

solely intended to be used to charge

mobile devices which are normally

charged through a USB port. This

product is not intended for commer-

cial use. Manufacturer is not liable

for damages, which result from non-

Intended use.

Any claims resulting from improper

use or due to unauthorised modiﬁca-

tion of the product will be consid-

ered un-warranted. Any such use is

at your own risk.

Warnings and

symbols used

These instructions for use contain the

following warnings:

8 GB/IE/NI

DANGER

This symbol in conjunction with the

„danger“ note indicates an immi-

nent dangerous situation which, if

not prevented, could result in serious

injury or even death.

WARNING

This symbol in conjunction with the

„warning“ note indicates important

information for safe operation of the

device and the safety of the user.

CAUTION!

This symbol with the signal

word indicates a hazard with

a low level of risk which, if

not avoided, could result in

minor or moderate injury.

NOTE

This symbol with the signal word

provides additional useful information.

9 GB/IE/NI

Trademark notice

- USB

®

is a registered trademark

of USB Implementers Forum,

Inc.

- The SilverCrest trademark and

trade name is the property of

their respective owners.

- Lightning is a trademark of

Apple Inc.

- Any other names and products

may be trademarks or registered

trademarks of their respective

owners.

Scope of delivery

1 Charging and Data Cable

1 Instructions for use

Before use

Note: All parts have to be un-

packed and the packaging material

has to be removed completely.

Please also check the content of

delivery inside packaging to see

if any damages. If you notice any

damage or missing parts, please

contact the dealer who sold this

product.

10 GB/IE/NI

Parts description

Please refer to fold out page

front / rear.

1

Lightning charging plug

2

Micro-USB plug

3

USB type A plug

4

LED indicator

5

Power- / status button

6

Power bank

7

Instructions for use

Technical data

Built-in battery: 3.7 V / 450 mAh

(Lithium poly-

mer)

Input voltage/

current: 5 V

, max.

500 mA

Output voltage/

current: 5 V

, 1 A

Minimum output

current: approx. 80 m

Operating

temperature: 5°C –35°C

Storage

temperature: 0°C – 45°C

Humidity

(no condensation): 10 % – 70 %

11 GB/IE/NI

Dimension

(Length x Diameter): approx.

103 x 17mm

Weight: approx. 40 g

Cable length: 1 meter

Safety notices

Please familiarise yourself with all in-

structions for use and Safety notices

before using the product for the ﬁrst

time. When passing this product on

to third parties, please be sure to in-

clude all documentation.

Check the product for visible ex-

ternal damage before use. Do

not use the product if damaged

or dropped.

This product may be used by

children age 8 years and up, as

well as by persons with physical,

sensory or mental impairments

or lacking experience and / or

knowledge, provided they are

supervised or instructed in the

safe use of the product and

12 GB/IE/NI

understand the associated risks.

Do not allow children to play

with the product. Never allow

children to clean or maintain

this product unsupervised.

DANGER! Packaging materi-

als are not a toy. Keep all packag-

ing materials out of the reach of

children. Suﬀocation hazard!

Do not expose the product to

direct sunlight or high tempera-

tures. It may otherwise overheat

and be damaged beyond repair.

Do not operate the product near

heat sources such as radiators

or other devices producing heat.

Do not operate the product near

open ﬂames, e.g. candles, open

ﬂames.

The product is not designed for

use in rooms with high tempera-

tures or humidity (i.e bathrooms)

or those in which a great amount

of dust is generated.

Do not expose the product to

extremely high temperatures.

This applies in particular if you

are thinking about storing the

13 GB/IE/NI

product in your car. Over a pro-

longed period of time, the car

and the glove compartment

could become extremely hot.

Remove electric and electronic

devices from the car.

Do not use the product immedi-

ately after it has brought from a

cold room to a warm room.

Allow the product to acclimatise

before you switch it on.

DANGER! Never open the

product casing. This product has

no internal parts requiring main-

tenance.

Do not independently convert or

modify the product.

Repairs to the product must be

performed by authorised spe-

cialised companies or customer

service. Improper repairs may

place the user in considerable

danger. They will also void the

warranty.

Do not expose the product to

dripping water or splashing wa-

ter and do not place containers

ﬁlled with liquids such as vases

14 GB/IE/NI

or open drinks on top of or

beside the product.

Immediately switch the product

oﬀ and remove the charging ca-

ble from the product if you smell

burning or see smoke. Have the

product examined by a quali-

ﬁed technician before using it

again.

If you use a USB power supply,

the socket used must always be

easily accessible so that the

USB power supply can be quickly

removed from the socket in the

case of emergency. Please also

refer to the USB Power supply

manufacturer‘s instruction

manual.

DANGER! Improper han-

dling of lithium polymer batter-

ies can result in ﬁre, explosions,

hazardous substances leaking,

or other dangerous situations!

Do not throw the product into

the ﬁre, as this could lead to the

built-in battery exploding.

Observe the usage restrictions

and prohibitions of use for

15 GB/IE/NI

battery-operated products in sit-

uations which may be hazard-

ous such as at petrol stations,

airports, hospitals, etc.

WARNING! During charg-

ing process, please be noticed

that the product must not be

covered.

Operation and use

Charging the

power bank

The built-in rechargeable battery

must be fully charged before using

the product. The required charging

time for the power bank

6

depends

on the charging source and its out-

put power.

To charge the power bank

6

only use power supplies with an

output voltage of 5 V and an

output current of at least 500 mA.

Connect the one end of this

product

3

(USB Type A) to a

USB power supply (not included

in the scope of delivery).

16 GB/IE/NI

The battery status will be shown

by LED indicator

4

and diﬀer-

ent LED color refer to power

bank battery capacity level dur-

ing the charging process.

To check with the power bank

battery capacity level, press the

power button / status button

5

,

LED indicator

4

will light up to

show the relavant bank power

battery level refer to below table,

LED indicator will automatically

oﬀ after 5 seconds.

Table A -

Checking

battery status

battery

power level

indication

LED light

status

57 % - 100 % Blue light up

15 % - 56 % Green light up

6 % - 14 % Red light up

0 % - 5 % Red ﬂashing

17 GB/IE/NI

Table B -

Under

Charging

mode battery

power level

indication

LED light

status

99 % - 100 % Blue light up

66 % - 98 % Green light up

33 % - 65 % Red light up

0 % - 32 % Red ﬂashing

Checking the

battery status

You can check the battery status on

the LED indicator

4

anytime.

Lightly press the Power /

status button

5

. The LED indi-

cator

4

shows the current bat-

tery status of the power bank

6

for approx. 5 seconds in

terms of LED indicator’s color,

details refer to table A.

Note: If battery power level

of the power bank

6

is lower

than 5%, the LED indicator

4

will automatically ﬂash to show

18 GB/IE/NI

power level is low, the product

need to charge up now.

Charging mobile

devices with the

power bank

Connect charging USB cable

2

micro-USB port or Lightning

charging plug

1

to device to

be charged. The charging pro-

cess will start automatically.

In case if the charging process

does not begin immediately,

press the Power / status Button

5

lightly to begin the charging

process. The current battery sta-

tus of the power bank

6

is indi-

cated during the charging

process by the LED indicator

4

,

please refer to Table B for more

details.

To end the charging process,

separate the USB charging ca-

ble Or lightning cable plug

1

from the mobile device and the

power bank

6

. The LED indica-

tor

4

will switch oﬀ after ap-

prox. 5 seconds.

19 GB/IE/NI

Data transfer

Use this product as a data cable

to transfer ﬁles directly through

your devices to computers or

other devices

Usage as a

charging cable

In this case, higher charging cur-

rent are possible to charge up

tablet computer as well. But it

depends on the tablet computer

charging current and voltage re-

quirements, details please check

with tablet manufacturer user

manual before charging your

tablet to make sure your tablet

device compatible with this

charging cable

Troubleshooting

= Problem

= Cause

= Solution

The power bank

6

is not

being charged.

20 GB/IE/NI

It may be that the power bank is

not connected properly.

Check that it is connected.

A connected device is not

being charged.

The battery is drained.

Charge the battery.

The device is not connected.

Check that it is connected.

Lightly press the power / status

button

5

to begin the charging

process.

The current consumption of the

connected device might be too

low.

Check with your connected de-

vice manual and see if your con-

nected device current

consumption comply with this

product.

The power bank

6

does

not react when the button

is pressed or when a de-

vice is connected, even

though the battery is

charged

21 GB/IE/NI

The power consumption of the

connected devices is too high.

Therefore, the internal overcurrent

protection device was activated.

At the moment, unplug the con-

nected device and power bank

will automatically remove fault

condition.

Cleaning and care

This product has no internal parts

requiring maintenance. Moisture

entering the product may result in

damage.

Ensure no moisture enters the

product during cleaning to

prevent damaging the product

beyond repair.

Do not use abrasive, solvent-

based or aggressive cleaners.

These can damage the surface

of the product.

Only clean the product with a

slightly damp cloth and mild

washing-up liquid.

Page is loading ...

Silvercrest 289484 Operation and Safety Notes

Silvercrest 289484 Operation and Safety Notes

in other languages

Related papers

Other documents