2. MiLAN
  3. E-MCC-1600

MiLAN E-MCC-1600, E-MCC-MM Install Manual

  • Hello! I am an AI chatbot trained to assist you with the MiLAN E-MCC-1600 Install Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installing Optional Management Module in
E-MCC-1600 Chassis
E-MCC-MM
CAUTION: Wear a grounding device and observe electrostatic
discharge precautions when installing Management Module in the 16-
Slot Media Conversion Center. Failure to observe this caution could
result in damage to, and subsequent failure of, Management Module.
To install the Management Module in the E-MCC-1600 chassis:
1. Locate Management Module installation slot on back of E-MCC-
1600.
2. Remove Management Module protective plate from installation
slot by removing two screws that secure plate to back of E-
MCC-1600.
3. Carefully slide Management Module into installation slot,
aligning Management Module with installation guides:
NOTE: Ensure that the Management Module is firmly seated
against the backplane.
4. Carefully rotate panel fastener screws (PROVIDED WITH
MANAGEMENT MODULE) clockwise to secure.
33052.A
Installing Optional Management Module in
E-MCC-1600 Chassis
E-MCC-MM
CAUTION: Wear a grounding device and observe electrostatic
discharge precautions when installing Management Module in the 16-
Slot Media Conversion Center. Failure to observe this caution could
result in damage to, and subsequent failure of, Management Module.
To install the Management Module in the E-MCC-1600 chassis:
1. Locate Management Module installation slot on back of E-MCC-
1600.
2. Remove Management Module protective plate from installation
slot by removing two screws that secure plate to back of E-
MCC-1600.
3. Carefully slide Management Module into installation slot,
aligning Management Module with installation guides:
NOTE: Ensure that the Management Module is firmly seated
against the backplane.
4. Carefully rotate panel fastener screws (PROVIDED WITH
MANAGEMENT MODULE) clockwise to secure.
33052.A
I
O
I
O
I
O
I
O
/