Pyle PRJTPFL102 User manual

Brand: Pyle

Model: PRJTPFL102

Type: User manual

Fixed Wall Mount Projector Screen

Universal Home/Office Projector

Viewing Display

• PRJTPFL102 - 100’’ - inch

• PRJTPFL112 - 110’’ - inch

• PRJTPFL122 - 120’’ - inch

www.PyleUSA.com

Be sure to read this manual before use so you will know how to install

it properly. After you have nished reading these documents,

put them away in a safe place for future reference.

• The content of this manual and the specications of the product it

describes are subject to change without prior notice.

• Note that PyleUSA will accept no liability whatsoever for injuries and

damages arising from incorrect use or handling that exceeds normal

operating limits.

IMPORTANT SAFETY INSTRUCTION

• Follow all installation instructions. Failing to do so, may lead to serious

consequences.

• Screens must be installed in accordance with the instructions.

Make sure that the wall mount projector is installed high enough so that

there is no risk of people bumping their heads. If a suﬃciently high

installation cannot be made, be sure to take the necessary precautions

when the projector is used.

• Ensure that the screen is mounted securely.

• Operate within specied temperature and humidity range

• Do not operate screen before it is installed on wall.

• Make sure that the operating voltage of the screen corresponds to your

local voltage.

• Provide proper adult supervision when using the screen around children.

• We strongly suggest that this item should be tted by a professional, we

will not be held responsible for any loss, incidental or consequential

damage.

• Do not install the projector in a location exposed to vibrations.

• After you have nished installation, keep this manual and accessories in a

safe place for future reference.

• Small parts could be swallowed by children and pets and should be kept

out of their reach. If your child swallows any small parts, consult a doctor

immediately.

Routine Inspections

Like the projector, the wall mount unit should be inspected once a year.

1. Check that the screws in the wall mount unit and adjusted parts are not

loose.

2. Check that the wall mount unit, adjusted parts and the set are not

scarred or damaged.

www.PyleUSA.com

INSTALLATION PROCEDURE

1. Open the carton and nd the square hole at both end of the polyfoam.

Take out the corner connector, hanging kit, Alan head screws, wrench,

and springs.

2. Lay the longer frame and shorter frame on a neat and soft ground. Place

the L-shape corner connector in the groove of both frames and join the

two frames together by the corner connector. Make sure the direction of

frame and connectors is correct. Drive the screws into the hole of

connectors and make sure the frames are joined in a right angle and

good tightness.

3. Stretch the screen and put the ber glass tube respectively according to

the length. Stretch the screen after the tubes are placed correctly. Put the

screen in vertical direction and make sure the screen is centered in the

frame. Use the spring hook to connect the hole on the frame and the

hole on the screen. Remember to work the springs hook on the four

corner of the frame rst before you work on hooks elsewhere. (smaller

hook of the spring for the frame and the bigger hook for screen.)

www.PyleUSA.com

4. Install the backing bar between the upper frame and bottom frame.

Slant the backing bar and put it in the groove of the frame before you

adjust it to be vertical

5. Install the hanging kits on the wall with the expansion bolt. Make sure

the two hangers are on the same horizontal line.

Hang the screen on the hangers.

www.PyleUSA.com

PRJTPFL102 - PRJTPFL112 - PRJTPFL122

Fixed Wall Mount Projector Screen

Universal Home/Oce Projector Viewing Display

Features:

• Fixed Wall Projector Screen

• Quick & Hassle-Free Setup

• Universal Wall Mounting, Flat Surface Installation

• Flat Leveled Display with Tension Spring Assembly

• Matte White Fabric

• HDTV Format Support Compatible

• Vivid Color Pickup: Quality Visual Reproduction Image & Video Capture

• Black Velvet Masking Border for Optimum Image Focus and Alignment

• Ideal for Home Theater, Oﬃce Presentation, School Classroom

Applications

What’s in the Box:

• Projector Screen

• Wall Display Frame

• Screen Mounting Hardware

Technical Specs:

• Screen Material: Engineered PVC Fabric Cloth

• Frame Material: Aluminum

• Matte Fabric Thickness: 0.5mm

• Projectors Viewing Angle: 160° Degree

• Display Ratio: 16:9

• Gain: 1.2

• Screen Color: Matte White

• Sold as: 1

PRJTPFL122PRJTPFL112PRJTPFL102

100’’ -inch (Diagonal)Screen Size 110’’ -inch (Diagonal) 120’’ -inch (Diagonal)

87.0''x48.8''-inches

(W x H)

White Display

Screen

Dimension

96.0''x54.0''-inches

(W x H)

104.0''x58.7''-inches

(W x H)

Total

Assembled

Dimensions

(L x W x H)

91.0'' x 52.0'' x 1.2''

-inches

100.0'' x 57.0'' x 1.2''

-inches

108.0'' x 62.2'' x 1.2''

-inches

Pyle PRJTPFL102 User manual

Pyle PRJTPFL102 User manual

Pyle PRJTPFL102 User manual

Related papers

Other documents