Luxor H Series Operation Instructions Manual

Brand: Luxor

Model: H Series

Category: Massagers

Type: Operation Instructions Manual

Luxor H Series is a full body air massage chair that offers a variety of features to help you relax and relieve tension.

The chair has five different simulation massage modes: kneading, tapping, sync with kneading and tapping, shiatsu, and knocking. It also has four characteristic automatic massage functions: auto, full body air pressure, swing hip, and waist stretch.

The upper body massage function has three modes: overall, partial, and fixed. Each mode has five speed levels to adjust. In fixed mode, the massage hands can move up and down. Under the state of tapping, shiatsu, and knocking, the width of the massage hands has three levels for choice: wide, medium, and narrow.

Luxor H Series is a full body air massage chair that offers a variety of features to help you relax and relieve tension.

SAVE THESE INSTRUCTIONS

Operation Instructions

Luxor Health

FULL BODY AIR MASSAGE CHAIR H SERIES

Thanks for purchasing this product. Please read this manual instruction

carefully in order to know how to use this product correctly before operation.

Please pay more attention to some important safety warning and keep this

manual book properly for future use.

Note: Our Company reserves the right to revise the design and description of

this product without any further notice. Please refer to the actual color of this

product.

CONTENTS

Safety and maintenance

Name and function of components

Function

Method of usage

Product specification

0302

1.IMPORTANT SAFETY WARNING.

Don t allow children to touch moveable part of this product.

Please use well-grounding power supply suited to this product.

Please pull out the plug after use or before cleaning to avoid injury or

Damage to the product.

Please operate this product according to this manual instruction.

Don t use accessories which are not recommended.

Don t use this product outdoors.

Please read this manual instruction carefully before operation.

Any other usage that is not listed in this manual instruction is forbidden.

20 minutes of usage each time is recommended.

Please don t use it if the leather is broken or damaged.

Please don t use it if the cover or leather is damaged.

Please don t use it if the radiator hole is covered or blocked.

Please don t drop anything into this product.

Please don t fall asleep while using this product.

Please don t use it if drunk or feel unwell.

Please don t use it within one hour after having meal.

Please don t make the massage function too strong for avoiding Injury.

2. Environment for usage.

Please don t use it under high temperature and moist environment such as

bathroom.

Please don t use it immediately while the environmental temperature changes

sharply.

Please don t use it under heavy-dusty or caustic environment.

Please don t use it where there is not enough space or not good ventilation.

3. People who are not suitable to use this product.

People who are suffering from osteoporosis are not suitable to use this product.

People who are suffering from heart disease or carrying electronic medical

equipment such as heart pacemaker are not suitable to use this product.

People who are suffering from fever are not suitable to use this product.

Pregnant women or women that are in menses period are not suitable to use this

product.

People who got injured or skin disease are not suitable to use this product.

Children under 14-year old or people mentally unbalanced without being

Supervised are not allowed to use this machine.

People who are told by doctor to have rest or people who feel unwell are not

suitable to use this product.

People whose bodies are wet are forbidden to use this product.

4. Safety.

Check the voltage if it is suitable to the specification of this product.

Don t use wet hand to pull the plug.

Don t make water go inside this product to avoid electric shock or cause

damage to this product.

Don t damage the wires or change the circuit of this product.

Don t use wet cloth to clean the electric parts such as switch and plug.

Be away from this product under power cut state to avoid injury if the power

comeback suddenly.

Stop using this product while it works abnormal, and please consult local agent

immediately.

Stop using this product if you feel unwell, and please consult health care doctor.

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its

Service agent or similarly qualified persons in order to avoid a hazard.

5. Maintenance.

This product should be maintained by certain appointed agents, users are

prohibited to disassemble or maintain by themselves.

Please don t forget to cut the power after usage.

Don t use this product if the socket looses.

If this product will be left unused for long, please curl up the wires and reserve

this product in dry and dustless environment.

Don t reserve this product under high temperature or near fire and avoid

longtime direct sunshine.

Please clean this product by dry cloth. Don t use thinner, benzene or alcohol.

The mechanical components of this product are specially designed and made,

it is not necessary to be specially maintained.

Don t use edged res to thrust this product.

Don t roll or pull this product above uneven ground, it should be lifted before

moving.

Please use it intermittently; don t make this product work continuously for long.

6. Solution of ordinary malfunctions.

It is nature movement voice if the motor sounds while in usage.

If the controller can t work normally, please check the plug and socket if they

are connected strongly and make sure the switch is turned on.

If the rated working time is over, the product will automatically activate the

power-off button; If this product works continuously for long, the temperature

protector will make the product automatically power-off, it should be used again

after half an hour s r est.

If the detachable cord / supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in order to avoid a

Hazard.

Safety and maintenance Safety and maintenance

0504

Function

Massage mechanism is four-wheel driven, muted design can move up and down.

Designed with five kinds simulation massage models: kneading, tapping, sync

with kneading and tapping, shiatsu, knocking.

Automatic testing and locating on shoulder position.

With the function of storing 2 massage states as memo.

With four characteristic automatic massage function. (Auto, full body air pressure,

swing hip, waist stretch).

Upper body characteristic automatic massage function: whole back, neck and

shoulder, back waist for choice.

Upper body manual massage function (three modes for choice: overall, partial,

fixed, each massage mode with five speed levels to adjust. In fixed mode, the

massage hands can move up and down; under the state of tapping, shiatsu and

knocking, the width of the massage hands has 3 levels for choice, wide, medium

and narrow.

Air pressure massage function: three modes for choice, arms, buttocks, footrest,

with three air pressure intensity adjustable. (If buttocks and legs air pressure are

working, it is lower body air pressure massage mode)

With rollers on foot, and the speed with 3 levels adjustable.

Calf rest extended stepless, fit for different body height.

With overturn function on upper arms fit for different body height.

With the function of calf rest rise up and down, backrest rise up and down, linkage

lifting with calf rest and backrest, lie down automatically.

Recover of the massage mechanism when turning off the chair.

VFD displayer

With led blue light artistic effect on armrest.

15 16

ON/OFF

FUSE

Name and function of components

Function

1.Head cushion

2.Upper arm airbags assembly

3.Manual controller

4.Arm airbags assembly

5.Seat cushion

6.Legs support

7.Footrest support

8.Back cushion

9.Armrest

10.LED blue light artistic effect

11.Back cover

12. Manual controller support

13.Caster

14.Power line and plug

15. Power line socket

16.Power switch

17.Fuse box

0706

Press the red button to start massage, the massage chair will be lie down

automatically.

esting upper body massage point and shoulder position first, after testing, sounded

with di-di-di notification tone, you can adjust the shoulder position by press up

or down button according to users' height in small scale. If without adjustment in 5-

10 seconds, then into the massage function automatically.

Shoulder position adjustment

FUSE

OFF

A B

Shoulder

adjust

Too high

Proper

Too low

Method of usage Method of usage

Note: For reference only, details please in kind prevail.

1.Switch on the machine

Switch position of the machine

Connect method figure

2.manual controller usage

1)switch on/off massage function

switch on massage function

Switch off massage function. When switch off, the VFD displayed off

state, all the massage function stopped, meanwhile sounded with di-

di-di ; massage hands, calf rest and back rest recovered automatically.

2)Start to massage

SHOULDER

POSITION

ADJUSTMENT

Adjust the position of the massage balls upward to up to a suitable

shoulder position.

Adjust the position of the massage balls downward to up to a

suitable shoulder position.

suitable shoulder position

3)Choose the massage function to massage

Memory function massage

During the massage process, you can invoke the memory massage function A, B

at any time, press one of the button, then recover to the stored memory state to

massage.

Arm

Lower body

Foot&Calf

Buttocks

Min

Intensity

Speed

Width

Memory set on

Shoulder

adjust

Time

Synch

Auto

MEMORY FUNCTION

6)manual operated massage

0908

5)Sole roller

Characteristic massage

Upper body characteristic automatic massage

Method of usage Method of usage

4)Auto massage

Button

Description

Display

AUTO

Ease massage: loose bones and muscles

Relaxing massage: promote blood circulation

Ache relieving massage: massage on shiatsu point to loose

ache point

Fatigue recovery massage: improve fatigue state to recover

vitality

Note: press the button again and again to choose different auto massage modes, 4

kinds of automatic circulation massage for choice

Button

Description

Display

WHOLE

BODY AIRBAGS

SWING HIP

WAIST

STRETCH

Full body air pressure: shoulder, arms, waist, buttocks, legs air

pressure working at the same time.

Swing hip: massage focus on hip, airbags in seat cushion working to

make hip swing left and right.

Waist stretch: legs air pressure working, squeezing legs, back rest lie

down, calf rest pull down to stretch on waist, then restore, repeat this

action. Seat cushion air pressure and massage hands work together.

Button

Description

Display

FULL BACK

NECK AND

SHOULDER

BACK

AND WAIST

Full back massage: massage focus on overall upper body

automatically

Neck and shoulder massage: massage focus on neck and

shoulder

Back and waist massage: massage focus on back and waist

Button

Description

Display

SOLE ROLLER

SPEED

Sole roller: Sole roller switch

Speed: start sole roller speed, 3 levels adjustable

KNEAD

FLAP

KNEAD&FLAP

SHIATSU

KNOCK

SPEED

WIDTH

BACK STRETCH

Button

Description

Display

Kneading: massage manipulation, speed adjustable

Tapping: massage manipulation, speed and width

adjustable

Kneading and tapping: massage manipulation, speed

adjustable

Shiatsu: massage manipulation, speed and width

adjustable

Knocking: massage manipulation, speed and intensity

adjustable

Speed: 5 levels adjustable

Width: 3 levels adjustable( under the state of tapping

and shiatsu)

Button

Description

Display

DOWNWARD

BUTTON

UPWARD

BUTTON

Permanent place (fixed point) massage

Small scale (partial) massage back and forth

upper body( full back) massage back and forth

Downward button: in fixed point and partial massage state, you can

choose the massage point by press this button to move down for pre

cise positioning.

Upward button: in fixed point and partial massage state, you can

choose the massage point by press this button to move up for precise

positioning.

1110

FUSE

OFF

Method of usage Method of usage

ARM

BUTTOCKS

FOOT

INTENSITY

CALF

STRETCH

FOOT

REST

BACK

REST

POSITION

ADJUST

LIE DOWN

MODEL

7)Air pressure massage

Button

Description

Arms air pressure massage function, switch and intensity settings, 3

intensity adjustable( in one button)

Buttocks air pressure massage function switch

Footrest air pressure massage function switch

Buttocks and legs air pressure intensity, 3 intensity adjustable

When the calf rest air pressure working, press this button can switch

on/off this function

Note: if the buttocks and legs air pressure are at work, it is lower body air pressure

massage mode.

8) Calf rest and back rest angle adjustment

Button

Description

Name

Calf rest goes up button: press this button, calf rest goes

up, stop when release it.

Calf rest goes down button: press this button, calf rest goes

down, stop when release it.

Back rest goes up button: press this button, backrest goes

up slowly, stop when release it.

Back rest goes down button: press this button, backrest

goes down slowly, stop when release it.

Linkage up button: press this button, backrest goes up slowly,

and calf rest goes down, stop when release it.

Linkage down button: press this button, backrest goes down

slowly, and calf rest goes up, stop when release it.

Lie down mode: total with 4 modes, the modes will change

accordingly with each press.( display 01-04)

3.Turn off power, stop massage

In massage process, press red button, all the massage function will stop, the

back rest and calf rest will restore automatically. If up to the setting time, all the

massage function will stop, but the back rest and calf rest will not restore.

At the end of the setting time or users switch off, manual controller displayer will

glitter with memory set on , reminds the users whether they need to store the

current massage mode, you can choose memo A or B as you need to store it.

Press the red button again, the whole machine will turn off, the massage hands

restore; or wait for 10 seconds, turn off automatically, the massage hands restore.

Turn off the power

Position of the power switch

Turn off method figure

4.Seat cushion installation instructions

Find out the air tube fitting from the left bottom of seat frame, connect it well

according to the color. Note: the three intake tubes in seat must get through from

the 20*10 steel tube in the mid of the seat frame.

Make the two metal buttons under the seat aligned with the 20*10 steel tube in

the mid of the seat frame, and push the seat cushion backward, to make sure the

metal buttons and the 20*10 steel tubes buckled well, till the round hole at the

right rear end of the seat aligned with the threaded hole on the steel tube on right

side of the seat frame. Note: before you push the seat cushion backward, you

should straighten the intake tube in seat, avoid to get stuck and stuffiness by the

20*10 steel tube. (Figure 2)

20X10

steel tube

20X10

steel tube

Figure 1 Figure 2

1312

Method of usage Method of usage

Install joint ring and crossed discal screw on the round hole which at the right rear

end of the seat, and make it tighten. (Figure 3)

Aligning the zip on bottom of the back cushion and back-end of the seat cushion, zip

them up and pull the bottom of the back cushion down until it is smooth. (Figure 4)

tighten the

crossed discal screw

seat

cushion

back

cushion

Zip

seat

cushion

back

cushion

Figure 3 Figure 4

Figure 5

Adjust the upper arms, finish the installation of seat cushion and upper arms.

(Figure 5)

tat

5.Armrest installation instructions

Find out the air tube fitting and corresponding plug connector from the bottom of

the seat frame and armrest, get through from the square hole on the fixed iron

plate. (Figure 1)

After the plug connector get through from the square hole on the fixed iron plate,

aligned to the corresponding connection plug. (Figure 2)

Pull

Figure 1 Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

Take the butt joint out from the bottom of the seat frame and plug into the

connector on the armrest, and the air tube fitting plug well too. (Figure 3)

After finish the connecting of the plug, put it in the bottom of the seat frame

through the square hole on the fixed iron plate, avoid to folding of the air tube.

Make the male pin on the armrest corresponding to the female pin on the fixed

plate, the outline of the iron plate corresponding to the concave outline of the

armrest. (Figure 5)

Holding the armrest and aligning the two male pin on the armrest on the female

pin on the iron plate (Observe whether the connecting line was in the bottom of the

seat frame to avoid to get stuck), the whole armrest hitched on the fixed iron plate.

Note: the connecting line must

to be stuffed in (avoid to get stuck)

After the armrest hitched on the fixed iron plate, press the armrest downward,

make the male pin on the armrest hang over the female pin on the fixed iron plate,

pull the armrest slightly to check whether they are all fasten up.

Find out the mounting hole in the front of the fixed iron plate, screw inner

hexagon screw and flat washer by inner hexagon spanner. (Figure 8)

Armrest

Seat cushion

calf rest

Hexagon screw fixing

figure of armrest front part

Press It

Downward Gently

1514

Method of usage Method of usage

Find out the upper mounting hole on the end of the fixed iron plate, use the inner

hexagon screw to screw it tighten, and the whole armrest installation finished, the

two armrest installation are the same. (Figure 9)

All finished. (Figure 10)

Armrest

Back Cover

Hexagon screw fixed

figure of armrest back part

Figure 9

Figure 10

6.Manual controller support installation

Manual

controller tray

Screw

support

Manual controller

support assembly

Prepare the manual controller support assembly. (Figure 1)

Insert the manual controller support assembly into the cylindrical fixed tube, note that

the two groups of mounting hole should be one to one correspondence. (Figure 2)

Figure 1 Figure 2

Prepare two screws which will be fixed on two sides. (Figure 3)

Screw the two screws on two sides to fix it, finish the installation. (Figure 4)

Figure 3 Figure 4

7.Controller installation and usage

Insert the manual controller in to the support (figure 1), the support can turn left and

right freely. (Figure 2) and the manual controller can swing freely in horizontal

direction. (Figure 3)

Figure 1

Figure 2 Figure 3

Enlarged figure

1 2

1716

Method of usage Method of usage

Product specification

8.The disassemble and using of head cushion and back cushion

You can weaken the kneading strength of the neck and shoulder by head cushion,

you can use it according to your requirement (Advise you use it). Back cushion

connect with back by zipper (1), head cushion connect with the back cushion by

fastener (2)

9.Method of movement

Make sure that all wires are far above the ground, tilt the backrest backward to a

certain degree (with the gravity center resting on the casters), push the chair

forward or backward with your hands and finally resume the chair to the normal

position in a slow and gentle manner.

10.Floor protection

Put the heavy massage chairs on the wood floor for a longtime may damage the

floor, so please place a carpet or other object to avoid this damage.

Caution: Do not move the chairs with its casters on bumpy ground or in a narrow

space. Two people are required to lift the chair.

Model: Luxor Health

Description: Full Body Air Massage Chair H Series

Rated Voltage: 110-120V~ 60Hz

220-240V~ 50Hz /60Hz

Rated Power Input: 180W

Rated Working Time: 15Minutes

Safety Design: Class

Material introduction: PVC, PA, steel parts and electric &ele

-ctron parts

MATERIAL

LEATHER CLOTH WOOD

Luxor H Series Operation Instructions Manual

Brand: Luxor

Model: H Series

Category: Massagers

Type: Operation Instructions Manual

Luxor H Series is a full body air massage chair that offers a variety of features to help you relax and relieve tension.

Download PDF

report

Luxor H Series Operation Instructions Manual

Luxor H Series Operation Instructions Manual

Related papers

Other documents