PARTS
1 X SEAT
1. Plug in the wheels
1 X BACKREST
STEPS
2 X CUSHIONS
1 X SEAT 2 X ARMREST
1 X TRAY
1 X GAS LIFT 1 X BASE 5 X WHEELS
1 X TOOL4 X SCREWS
(FOR ARMRESTS)
1 x FOOTREST
(OPTIONAL)
2. Install the gas lift into the base 3. Fix the T on the back
(The dimple facing outside)
4. Undo the screws on the
back of the seat, fix
the trayon the seat.
5. Put the seat on top of the gas lift 6. Insert the T into the
back of the tray
7. Install the armrests with
four long screws
8. Place and tighten
Head cushion
9. Lumbar support cushion