Swim Ways 11649 Operating instructions

Brand: Swim Ways

Model: 11649

Type: Operating instructions

This manual is also suitable for

SSP10152

Page 1 of 2

Thank you for purchasing the SwimWays Baby Spring Float. At SwimWays

our mission is to make your free time more fun through innovation by

creating exciting products for you and your family.

Water Introduction

Helps your baby become comfortable in the water, keeping her supported

and balanced.

 Fabric-covered inflation for durability & comfort.

 Lower center of gravity, safety valves and separate air chambers

ensure security.

 Inner Spring Technology for stability & portability.

TO INFLATE

1. Remove valve caps.

2. Inflate 2 chambers.

3. Replace cap and press cap and valve stem down into float.

TO DEFLATE AND STORE

1. Remove valve cap and pinch the bottom of valve to release air.

Deflate float before folding.

2. Hold float as shown, palms facing out. Bring your hands together in

front of you.

3. Overlap your hands and float will automatically close into 3 small

circles.

Item #11608

SwimWays Baby Spring Float

Page 2 of 2

Product Care:

Rinse with fresh water to remove salt and chlorine. Store out of direct

sunlight.

WARNING: This is not a lifesaving device. Do not leave child unattended

while device is in use. Always stay in the pool within arm’s reach of child.

Open item slowly to avoid sudden movement.

WARNING: Tip Over-Child may crawl out of seat and fall in the water. Always

stay in the pool within arm’s reach of the child.

Ages: 9-24 months

Questions? Call SwimWays Customer Service

8:30 a.m. – 5 p.m., EST, Monday-Friday

1.800.889.SWIM (7946)

www.swimways.com

Please retain this sheet for future use.

1
2

Swim Ways 11649 Operating instructions

Brand: Swim Ways

Model: 11649

Type: Operating instructions

This manual is also suitable for

SSP10152

Related papers

Other documents