Congratulations on your G2 cordless blind purchase! You can take pride
and comfort in knowing that your new blind will be easy to install, will
add to your home’s beauty, and will perform to your expectations. Before
beginning installation, please take a moment to review the following
instructions and safety warnings.
Instructions for Installation, Operation and Cleaning
12
6
9
3
Time Required: 15 minutes
2 3
1. G2 Cordless Blind
2. Brackets
3. Screws
1
:
,
in u r
IMPORTANT
SAFETY
INFORMATION
Read all str ctions wa ning tags,
and labels provided with your product
to avoid injury. Keep this manual.
Please contact our Customer Service
Center at the phone number, email or
address below for additional support.
For additional safety tips visit the
Home Safety Council at
www.homesafety.org.
Tools Needed
3/32” drill bit
AFFORDABLE
INNOVATIVE
If you have any questions regarding installation please call Achim’s Customer Service at
1800-54-ACHIM www.achimonline.com
Achim’s family of Home Furnishings thanks you for your
most recent purchase. We are condent this product will
bring you years of pleasure and enjoyment !
02032015
Installation Instructions
1 Determine inside/ceiling outside mount
. or
2. Place blind in desired location and mark corners.
Inside/Ceiling Mount
Outside Mount
Inside/Ceiling Mount
Outside Mount
Inside/Ceiling Mount
Outside Mount
3. Tilt blind forward and mark location of internal
components. For proper operation of the blind,
brackets must be outside of this area.
02032015
If you have any questions regarding installation please call Achim’s Customer Service at
1800-54-ACHIM www.achimonline.com
4. Mark screw locations. Align edge of bracket with
inside or outside of marks made in step 3, ensuring
to avoid the “X.”
5. Drill holes.
6. Screw brackets into place.
Inside/Ceiling Mount
Outside Mount
Inside/Ceiling Mount
Outside Mount
Inside/Ceiling Mount
Outside Mount
02032015
If you have any questions regarding installation please call Achim’s Customer Service at
1800-54-ACHIM www.achimonline.com
height.
Tip: You may pull blind all the way down to the
window sill or stop at any desired
gently pulling down.
TO TILT SLATS:
Use tilt wand to open and close blinds as desired.
Operation Instructions
Push blind up by pushing on the button located at
the center of the bottom rail and gently pushing up.
Tip: You may fully open blind to top of window
or stop at any desired height.
TO BRING BLIND DOWN TO WINDOW SILL:
Pull blind down to the window sill by pushing on
button located at the center of the bottom rail and
TO FULLY OPEN BLIND:
02032015
If you have any questions regarding installation please call Achim’s Customer Service at
1800-54-ACHIM www.achimonline.com
7. Mount blind in brackets.
ACHIM'S CONTACT
If you have any questions regarding installation please call Achim’s Customer Service at 1800-54-ACHIM
www.achimonline.com
NOTE:
This blind cannot be shortened. Blind intentionally made longer to allow for slat tilt operation. Altering the length
of this blind will compromise the function and shall void the warranty.
TO CLEAN BLIND:
Dust gently with clean, damp non-abrasive cloth.
TIP:
You can move blind and down and slat tilt at time.always up adjust any
02032015
If you have any questions regarding installation please call Achim’s Customer Service at
1800-54-ACHIM www.achimonline.com
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Achim CSCO39AL06 Installation guide
-
Lotus & Windoware, Inc. VV825VVWH50PK User guide
-
-
Achim MSG228WD06 Installation guide
-
Achim CCRD39BK02 Installation guide
-
Achim RSBC29GY04 Installation guide
-
-
HOME basics CCDDX6664-62.25 Operating instructions
-
-
Wave Contour WC23948W-E Installation guide
