Harris 39172 is a versatile tool that can be used for a variety of tasks. It is a powerful and durable device that is perfect for both indoor and outdoor use. Some of the features and possible use cases of the Harris 39172 include:
- Painting: The Harris 39172 is a great choice for painting projects of all sizes. It can be used to apply paint to walls, ceilings, furniture, and other surfaces. The adjustable spray pattern allows you to control the amount of paint that is applied, and the powerful motor ensures that the paint is applied evenly and smoothly.
- Staining: The Harris 39172 can also be used to apply stain to wood surfaces. The adjustable spray pattern allows you to control the amount of stain that is applied, and the powerful motor ensures that the stain is applied evenly and smoothly.
Harris 39172 is a versatile tool that can be used for a variety of tasks. It is a powerful and durable device that is perfect for both indoor and outdoor use. Some of the features and possible use cases of the Harris 39172 include:
- Painting: The Harris 39172 is a great choice for painting projects of all sizes. It can be used to apply paint to walls, ceilings, furniture, and other surfaces. The adjustable spray pattern allows you to control the amount of paint that is applied, and the powerful motor ensures that the paint is applied evenly and smoothly.
- Staining: The Harris 39172 can also be used to apply stain to wood surfaces. The adjustable spray pattern allows you to control the amount of stain that is applied, and the powerful motor ensures that the stain is applied evenly and smoothly.
TECHNICAL DATA DIGEST
HARRIS ACRYLIC WALL PRIMER
INTERIOR/EXTERIOR
PROCUCT DESCRIPTION: Harris Acrylic Wall Primer is an alkali resistant surface
conditioner based on styrene acrylic resin. It provides a
barrier coat for high pH surface. It also seals the surface
preventing moisture to affect the finish coat, and avoid
premature failures. It is recommended as a primer for new
concrete surfaces, stucco, concrete, block, mortar joint
surfaces, gypsum board and to seal loose chalk, in light
condition, on previously painted surfaces. This primer is
also sealer designed to consolidate light chalk and
concrete dust on the surface, allowing a non-penetrating
coating to adhere properly. Retards efflorescence and
promote good paint adhesion.
PACKAGING: 1 Gallon and 5 Gallons Containers
FINISH: Flat (0-5%) @ Geometry 60
o
COLOR: White
DENSITY: 11.30 LBS
VISCOSITY: 75-80 KU’S (KREBS-STORMER)
GRIND: 6 NS min.
TOTAL SOLIDS (by weight): 50.23%
TOTAL SOLIDS (by volume): 37.81%
NON VOLATILE VEHICLE: 24%
TOTAL NON-VOLATILE: 53%
PIGMENTS: TiO2 6.8% , Zinc Oxide 1%, Silicates 20%
DRYING TIME: Set to touch between 20-30 minutes. Recoat 2 hours to
recoat.
TECHNICAL DATA DIGEST
HARRIS WALL PRIMER (Cont.)
APPLICATION
SURFACE Surfaces must be dry, clean and free of oil, grease,
PREPARATION: dirt and loose concrete.
NEW CONCRETE AND All surfaces must be dry and free of oil, dust, etc.,
PAINTED SURFACES: before painting. All surfaces previously coated with
cement base water paints, should be washed before
applying Harris Acrylic Wall Primer. Can be applied over
light chalky surfaces.
THINNING: Not recommended. Do not mix with solvent or thinned
paints.
MILDEWED Clean by scrubbing with water containing 16 oz.
SURFACES: household bleach and 2 oz. liquid detergent per gallon of
water. Then, follow procedure as for new surfaces.
METHOD OF To insure complete mixing stir thoroughly. Apply
APPLICATION: uniformly with brush, roller or spray. Porous or texture
surfaces will require more primer. Avoid application in
direct sun or on hot surfaces.
COVERAGE: On smooth surfaces apply at a rate of approximately 350-
400 sq. ft per gallon. Porous or texture surfaces will
require more primer.
CLEANUP: Wipe up drips and spatters with a wet cloth with soap and
water; clean equipment with soapy water.
PRECAUTIONS: Do not take internally. Close container after each use.
KEEP OUT OF THE REACH OF CHILDREN!
-
1
-
2
Harris 39172 User guide
- Type
- User guide
- This manual is also suitable for
Harris 39172 is a versatile tool that can be used for a variety of tasks. It is a powerful and durable device that is perfect for both indoor and outdoor use. Some of the features and possible use cases of the Harris 39172 include:
- Painting: The Harris 39172 is a great choice for painting projects of all sizes. It can be used to apply paint to walls, ceilings, furniture, and other surfaces. The adjustable spray pattern allows you to control the amount of paint that is applied, and the powerful motor ensures that the paint is applied evenly and smoothly.
- Staining: The Harris 39172 can also be used to apply stain to wood surfaces. The adjustable spray pattern allows you to control the amount of stain that is applied, and the powerful motor ensures that the stain is applied evenly and smoothly.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
