2. MSI
  3. Aegis R
Aegis R

MSI Aegis R Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the MSI Aegis R Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Intel
®
Multiple-Displays
Conguration Guide
2
Intel Multiple Displays Configuration Guide
What is Multiple-Displays
Multiple-Displays is the use of multiple physical display devices, such as monitors,
televisions, and projectors, in order to increase the area available for computer
programs running on a single computer system.
System Requirement
You need to have the following system requirements to setup Multiple-Displays.
Operating systems:
■ Windows 7 32bit/ 64bit
■ Windows 8 32bit/ 64bit
■ Windows 8.1 32bit/ 64bit
Driver:
■ Intel
®
Graphics Driver
How to Enable Multiple-Displays?
Multiple displays support two congurations:
Extended
Desktop
Provides a larger Windows desktop area spanning all
displays.
Duplicate
Display
Clone where the same screen is shown on all displays.
Important
Although the motherboard has more then three display connectors, IGD (Integrated
Graphics Device) can only support a maximum of three displays.
3
Intel Multiple Displays Configuration Guide
To enable extended desktop using Intel
®
HD Graphics Driver Properties:
From the Windows desktop, press
Ctrl+Alt+F12 or click the Intel
®
Graphics Tray Icon
from the task bar to open the Intel
®
Graphics Control Panel.
After opening the Intel
®
HD Graphics Control Panel, use the following steps to select
multiple displays:
1. Select Display.
2. Select Multiple Displays.
4
Intel Multiple Displays Configuration Guide
3. Select your Display Mode to Clone or Extended Desktop.
4. Select your Active Displays by selecting the primary display, second and third
displays.
Important
You must have three monitors connected to see all three dropdown menus.
5
Intel Multiple Displays Configuration Guide
5. You arrange the displays by using the mouse to move the displays in a dierent
arrangement.
6. Click Apply to save changes.
7. Click OK to close the Intel
®
HD Graphics Control Panel.
/