Kohler 99688-HF1 Installation guide

Type
Installation guide

This manual is also suitable for

1241238-2-A Kohler Co.
Hardware Placement Guide
Drawer Pull
Location
Door Pull
Location
1-1/2" (38 mm)
3" (76 mm)
3"
(76 mm)
2-1/8"
(54 mm)
3" (76 mm)
Centered
Side to Side
Hardware Placement for K-99688
Measure and mark the dimensions for the hardware on the drawers and the doors.
Drill a 3/16” (21 mm) hole at each marking.
Insert a screw through the top hole from the inside. Count the number of visible notches on the
screw that appear from the other side.
Remove the screw and using a pair of side cuers, cut the screw at the appropriate notch. Repeat
for each screw.
Insert a screw through a hole, and align with a handle. Thread the handle onto the screw. Repeat
for each handle.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kohler 99688-HF1 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI