Page is loading ...
Wireless Bluetooth Mouse Manual
Thanks for choosing our product!
Wide application
Hardware: Laptop/ PC/ Computer, iPhone/ iPad(compatible with iOS 13.1.2 and later version)
Note: The system that is earlier version should be updated to iOS 13.1.2 or later version.
OS: Windows(include Win10）/ Mac OS X (not for Mac OS 10.13.3 and Mojave system)/ Linux/
Andriod
Main Feature
-3 levels of DPI resolution:800/1200/1600
-Built-in software with an interface that is compatible with Bluetooth 2.0/3.0/4.0
-Frequency band: 2.4-2.4B35GHZ
-Receiving sensitivity:-75bm ( standard )
-RF output power: <4bm ( minimum radiates )
Precautions
-Bluetooth mouse will not perform optimally on glass or smooth surfaces.These surfaces may
alter mouse accuracy and response time.
-During setting up. if the password is required, select "No
password“ or try“0000“ or “1234“
-The mouse goes into sleep mode after a few minutes cf inactivity.click the mouse to wake.
-Once the Bluetooth connection is set up. there is no need to set up the connection again when
you restart your devices or re-plug in the dongle. Click the mouse will reactivate the connection.
Reconnection is necessary
if the Bluetooth connection button is turned oft
- Reconnect the Bluetooth the mouse is not working properly. Open the Bluetooth Dongle
Software.disable the mouse and reconnect
Installation Guide
Part 1
Installing the batteries( for AAA Battery version)
-Use two AAA batteries.
-Remove the battery cover from the back of the mouse
-Insert the batteries. making sure that the positive(+) and negative(-) ends of each battery match
the polarity indicators inside the battery housing.
-Snap the battery cover back into position.
-Turn on the mouse by sliding on/off switch on the bottom to the 'ON' position.
How to charge the mouth(for recharge version)
Run out off the power before the first charge.
Turn the power switch to “off”position.
Charge with USB cable plugging to power source or computer.
-Blue light will be on to indicate charging.
-Fully charge takes 2-3 hours.
Part 2
1. Go to the Bluetooth place icon located on your desktop or in the system tray and double click,
then click Add a Bluetooth Device.
2. The Bluetooth Wizard screen will prompt then just follow the screen instruction.
3 Turn on the mouse and press the connection ID button at the bottom of the mouse until the led
on the mouse blinks(discovery mode). Click Next to continue pairing and the computer will
search for the mouse.
4. The confirmed window will appear after the computer finishes detecting the Bluetooth devices.
Select the Bluetooth mouse4.0 and click next to continue. (There may be one or more different
Bluetooth devices detected).
If the mouse is not detected, please make sure the power is on and in discovery mode. Press
search again to re-pair the device.
After selecting the correct device. the computer will finish establishing the connection. Please
wait until the setup is completed.
iPhone/iPad iOS 13.1.2 or later version matching
( 1 ): Turn on the mouse by switching to "ON" position and pressing the "connect" button for
3 seconds at the bottom of mouse.
The light of the mouse will flash (in the discovery mode condition ).
( 2 ): Search the "Bluetooth icon" on your device, please double click and open it. ( Click: Settings
- Accessibility - Touch - AssistiveTouch (On) - Devices - Bluetooth devices) . Then select
"Bluetooth Mouse 4.0" and click it. Enter the matching code "0000" or "1234" and
simultaneously press "Connect" on the back of the mouse for more than 3 seconds waiting for
connection.
iPhone/iPad iOS 13.1.2 or earlier version matching( jail-broken)
( 1 ): Please confirm your device is jail-broken, and enter Cydia to search for BTstack Mouse, and
click to set up the software.
( 2 ) : Please find the Mouse icon on the desktop after setting up, and click the mouse to enter.
( 3 ) : After entering Mouse, open Bluetooth mouse, it can search automatically and implement
the above step 3 to enter discovery mode, click to pair when Mouse icon is searched.
( 4 ) : But only the left button can work now; it needs to setup. Please self-operating according to
different iOS versions.
Android Device Matching
( 1 ) : To activate the Bluetooth in the mobile phone/ tablet device, and start searching the device.
( 2 ) : To implement the above step 3 to enter discovery mode.
( 3 ) : Click the Mouse icon searched on the mobile phone, and pair(finish automatically)
Troubleshooting
The mouse can not power on?
Make sure that the polarity of the batteries is correct.
The positive(+) and negative(-) ends of the battery must match the positive and negative
connections in the battery housing. (for AAA battery version)
Make sure the battery is charged(for recharge version)
The mouse can not pair with my computer?
Verify that your computer is Bluetooth enabled.
Verify that the device drivers are installed:
1. Click star settings/Control Panel/System/Hardware/ device Manager
2. Check under "Bluetooth devices" that a Bluetooth Mouse is installed.
-Verify that the remote member of the pair is within range, and powered up. and then attempt
the connection again.
-Make sure you follow the instruction correctly, press the black small match button before you try
to scan for the mouse on your computer.
-Delete all the Bluetooth devices in My Bluetooth Places and pair them with the mouse again.
The mouse di1eonnected and reconnect again?
Check the capacity of the battery is enough or not.
Please charge the mouse(for recharge version).
/
