HP dc72 Blade Workstation Client User manual

Hardware Reference Guide - dx7300 Slim

Tower Model

HP Compaq Business PC

Development Company, L.P. The

information contained herein is subject to

change without notice.

Microsoft and Windows are trademarks of

Microsoft Corporation in the U.S. and other

countries.

The only warranties for HP products and

services are set forth in the express warranty

statements accompanying such products

and services. Nothing herein should be

construed as constituting an additional

warranty. HP shall not be liable for technical

or editorial errors or omissions contained

herein.

This document contains proprietary

information that is protected by copyright. No

part of this document may be photocopied,

reproduced, or translated to another

language without the prior written consent of

Hewlett-Packard Company.

Hardware Reference Guide

HP Compaq Business PC

dx7300 Slim Tower Model

First Edition (August 2006)

Document Part Number: 418632-001

About This Book

This guide provides basic information for upgrading this computer model.

WARNING! Text set off in this manner indicates that failure to follow directions could result in

bodily harm or loss of life.

CAUTION Text set off in this manner indicates that failure to follow directions could result in

damage to equipment or loss of information.

NOTE Text set off in this manner provides important supplemental information.

ENWW iii

iv About This Book ENWW

Table of contents

1 Product Features

Standard Configuration Features ......................................................................................................... 1

Front Panel Components ..................................................................................................................... 2

Media Card Reader Components ......................................................................................................... 3

Rear Panel Components ...................................................................................................................... 4

Keyboard .............................................................................................................................................. 5

Using the Windows Logo Key .............................................................................................. 6

Special Mouse Functions ..................................................................................................................... 7

Serial Number Location ........................................................................................................................ 7

2 Hardware Upgrades

Serviceability Features ......................................................................................................................... 9

Warnings and Cautions ........................................................................................................................ 9

Removing the Computer from the Stand ............................................................................................ 10

Unlocking the Smart Cover Lock ........................................................................................................ 11

Smart Cover FailSafe Key ................................................................................................. 11

Using the Smart Cover FailSafe Key to Remove the Smart Cover Lock ........................... 11

Removing the Computer Cover .......................................................................................................... 13

Replacing the Computer Cover .......................................................................................................... 14

Installing Additional Memory .............................................................................................................. 15

DIMMs ............................................................................................................................... 15

DDR2-SDRAM DIMMs ...................................................................................................... 15

Populating DIMM Sockets ................................................................................................. 16

Installing DIMMs ................................................................................................................ 17

Removing or Installing an Expansion Card ........................................................................................ 19

Drive Positions ................................................................................................................................... 24

Installing and Removing Drives .......................................................................................................... 25

Removing an Optical Drive ................................................................................................ 26

Installing an Optical Drive into the 5.25-inch Drive Bay ..................................................... 28

Removing an External 3.5-inch Drive ................................................................................ 31

Installing a Drive into the 3.5-inch External Drive Bay ....................................................... 34

Removing and Replacing the Primary 3.5-inch Internal SATA Hard Drive ........................ 37

Appendix A Specifications

Appendix B Battery Replacement

Appendix C External Security Devices

ENWW v

Installing a Security Lock .................................................................................................................... 47

Cable Lock ......................................................................................................................... 47

Padlock .............................................................................................................................. 48

Appendix D Electrostatic Discharge

Preventing Electrostatic Damage ....................................................................................................... 49

Grounding Methods ............................................................................................................................ 49

Appendix E Computer Operating Guidelines, Routine Care and Shipping Preparation

Computer Operating Guidelines and Routine Care ............................................................................ 51

Optical Drive Precautions ................................................................................................................... 52

Operation ........................................................................................................................... 52

Cleaning ............................................................................................................................. 52

Safety ................................................................................................................................. 52

Shipping Preparation .......................................................................................................................... 52

Index ................................................................................................................................................................... 53

vi ENWW

1 Product Features

Standard Configuration Features

The HP Compaq Slim Tower features may vary depending on the model. For a complete listing of the

hardware and software installed in the computer, run the diagnostic utility (included on some computer

models only). Instructions for using the utility are provided in the Troubleshooting Guide on the

Documentation and Diagnostics CD.

Figure 1-1 Slim Tower Configuration

ENWW Standard Configuration Features 1

Front Panel Components

Drive configuration may vary by model.

Table 1-1 Front Panel Components

1 Microphone Connector 6 Dual-State Power Button

2 Headphone Connector 7 3.5-inch Media Card Reader (optional)

1

3 USB (Universal Serial Bus) Ports 8 Optical Drive Activity Light

4 Hard Drive Activity Light 9 5.25-inch Optical Drive

2

5 Power On Light 10 Optical Drive Eject Button

NOTE An optical drive is a CD-ROM, CD-R/RW, DVD-ROM , DVD+R/RW, or CD-RW/DVD Combo drive.

1

Some models are configured with a diskette drive in the external 3.5-inch drive bay. Other models have a bezel blank

covering this bay.

2

Some models are configured with a bezel blank covering this bay.

2 Chapter 1 Product Features ENWW

Media Card Reader Components

The media card reader is an optional device available on some models only. Refer to the following

illustration and table to identify the media card reader components.

Table 1-2 Media Card Reader Components

1 SmartMedia/xD

●

3.3V SmartMedia Card (SM)

●

D-Picture Card (xD)

4 USB (Universal Serial Bus) Port

2 Media Card Reader Activity Light 5 CompactFlash I/II

●

CompactFlash Card Type 1

●

CompactFlash Card Type 2

●

MicroDrive

3 SD/MMC+/miniSD

●

Secure Digital Card (SD)

●

MiniSD

●

MultiMediaCard (MMC)

●

Reduced Size MultiMediaCard (RS MMC)

●

MultiMediaCard 4.0 (Mobile Plus)

●

Reduced Size MultiMediaCard 4.0 (MMC

Mobile)

●

MMC Micro (adapter required)

●

MicroSD (T-Flash) (adapter required)

6 MS PRO/MS PRO DUO

●

Memory Stick (MS)

●

MagicGate Memory Stick (MG)

●

MagicGate Memory Duo

●

Memory Stick Select

●

Memory Stick Duo (MS Duo)

●

Memory Stick PRO (MS PRO)

●

Memory Stick PRO Duo (MS PRO Duo)

ENWW Media Card Reader Components 3

Rear Panel Components

Table 1-3 Rear Panel Components

1 Power Cord Connector 6 RJ-45 Network Connector

2 PS/2 Mouse Connector (green) 7 Parallel Connector

3 PS/2 Keyboard Connector (purple) 8 Monitor Connector

4 Universal Serial Bus (USB) 9 Line-Out Connector for powered audio

devices (green)

5 Serial Connector

1

10 Line-In Audio Connector (blue)

NOTE Arrangement and number of connectors may vary by model.

The monitor connector on the system board is inactive when a PCI Express graphics card is installed in the

computer.

If a PCI graphics card is installed, the connectors on the card and the system board may be used at the same

time. Some settings may need to be changed in Computer Setup to use both connectors. For information

about Boot Order, refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics

CD.

1

An optional second serial connector is available from HP.

4 Chapter 1 Product Features ENWW

Keyboard

Table 1-4 Keyboard Components

1 Function Keys Perform special functions depending on the software application being used.

2 Editing Keys Includes the following: Insert, Home, Page Up, Delete, End, and Page Down.

3 Status Lights Indicate the status of the computer and keyboard settings (Num Lock, Caps Lock,

and Scroll Lock).

4 Numeric Keys Work like a calculator keypad.

5 Arrow Keys Used to navigate through a document or Web site. These keys allow you to move

left, right, up, and down, using the keyboard instead of the mouse.

6 Ctrl Keys Used in combination with another key; their effect depends on the application

software you are using.

7 Application Key

1

Used (like the right mouse button) to open pop-up menus in a Microsoft Office

application. May perform other functions in other software applications.

8 Windows Logo Keys

1

Used to open the Start menu in Microsoft Windows. Used in combination with other

keys to perform other functions.

9 Alt Keys Used in combination with another key; their effect depends on the application

software you are using.

1

Keys available in select geographic regions.

ENWW Keyboard 5

Using the Windows Logo Key

Use the Windows Logo key in combination with other keys to perform certain functions available in the

Windows operating system. Refer to the

Keyboard section to identify the Windows Logo key.

Windows Logo Key Displays or hides the Start menu

Windows Logo Key + d Displays the Desktop

Windows Logo Key + m Minimizes all open applications

Shift + Windows Logo Key + m Undoes Minimize All

Windows Logo Key + e Launches My Computer

Windows Logo Key + f Launches Find Document

Windows Logo Key + Ctrl + f Launches Find Computer

Windows Logo Key + F1 Launches Windows Help

Windows Logo Key + l Locks the computer if you are connected to a network domain, or

allows you to switch users if you are not connected to a network

domain

Windows Logo Key + r Launches the Run dialog box

Windows Logo Key + u Launches the Utility Manager

Windows Logo Key + Tab Activates the next Taskbar button

6 Chapter 1 Product Features ENWW

Special Mouse Functions

Most software applications support the use of a mouse. The functions assigned to each mouse button

depend on the software applications you are using.

Serial Number Location

Each computer has a unique serial number located on the top of the computer (1) and a product ID

number located on the side panel of the computer (2). Keep these numbers available for use when

contacting customer service for assistance.

Figure 1-2 Serial Number and Product ID Location

ENWW Special Mouse Functions 7

8 Chapter 1 Product Features ENWW

2 Hardware Upgrades

Serviceability Features

The computer includes features that make it easy to upgrade and service. No tools are needed for most

of the installation procedures described in this chapter.

Warnings and Cautions

Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and

warnings in this guide.

WARNING! To reduce the risk of personal injury from electrical shock, hot surfaces, or fire:

Disconnect the power cord from the wall outlet and allow the internal system components to cool

before touching.

Do not plug telecommunications or telephone connectors into the network interface controller

(NIC) receptacles.

Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.

To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper

workstation, setup, posture, and health and work habits for computer users, and provides

important electrical and mechanical safety information. This guide is located on the Web at

http://www.hp.com/ergo and on the Documentation and Diagnostics CD.

CAUTION Static electricity can damage the electrical components of the computer or optional

equipment. Before beginning these procedures, ensure that you are discharged of static

electricity by briefly touching a grounded metal object. See Appendix D,

Electrostatic

Discharge for more information.

When the computer is plugged into an AC power source, voltage is always applied to the system

board. You must disconnect the power cord from the power source before opening the computer

to prevent damage to internal components.

ENWW Serviceability Features 9

Removing the Computer from the Stand

When accessing internal components, remove the computer from the stand before removing the

computer cover. To remove the computer from the stand:

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as diskettes or compact discs, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION Regardless of the power-on state, voltage is always present on the system

board as long as the system is plugged into an active AC outlet. You must disconnect the

power cord to avoid damage to the internal components of the computer.

5. Lift the computer off the stand.

Figure 2-1 Removing the Computer from the Computer Stand

NOTE Lay the computer on its side (with the computer cover facing up) before removing the

computer cover and installing hardware.

10 Chapter 2 Hardware Upgrades ENWW

Unlocking the Smart Cover Lock

NOTE The Smart Cover Lock is an optional feature included on some models only.

The Smart Cover Lock is a software-controllable cover lock, controlled by the setup password. This lock

prevents unauthorized access to the internal components. The computer ships with the Smart Cover

Lock in the unlocked position. For more information about locking the Smart Cover Lock, refer to the

Desktop Management Guide on the Documentation and Diagnostics CD.

Smart Cover FailSafe Key

If you enable the Smart Cover Lock and cannot enter your password to disable the lock, you will need

a Smart Cover FailSafe Key to open the computer cover. You will need the key to access the internal

computer components in any of the following circumstances:

●

Power outage

●

Startup failure

●

PC component (for example, processor or power supply) failure

●

Forgotten password

NOTE The Smart Cover FailSafe Key is a specialized tool available from HP. Be prepared;

order this key before you need one.

To obtain a FailSafe Key:

●

Contact an authorized HP reseller or service provider. Order PN 166527-001 for the wrench-style

key or PN 166527-002 for the screwdriver bit key.

●

Refer to the HP Web site (

http://www.hp.com) for ordering information.

●

Call the appropriate number listed in the warranty or in the Support Telephone Numbers guide on

the Documentation and Diagnostics CD.

Using the Smart Cover FailSafe Key to Remove the Smart Cover Lock

To open the computer cover with the Smart Cover Lock engaged:

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as diskettes or compact discs, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION Regardless of the power-on state, voltage is always present on the system

board as long as the system is plugged into an active AC outlet. You must disconnect the

power cord to avoid damage to the internal components of the computer.

5. If the computer is on a stand, remove the computer from the stand.

6. Use the Smart Cover FailSafe Key to remove the tamper-proof screw (1) that secures the Smart

Cover Lock to the chassis.

ENWW Unlocking the Smart Cover Lock 11

7. Push the metal arm that wraps around the air vent grid up and back (2) to free the Smart Cover

Lock from the chassis.

Figure 2-2 Removing the Smart Cover Lock Screw

8. Remove the computer cover.

To reattach the Smart Cover Lock, secure the lock in place with the tamper-proof screw.

12 Chapter 2 Hardware Upgrades ENWW

Removing the Computer Cover