Page is loading ...
1of4
LightSourceToolsRequired
3BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Package Contents
Table of
Contents
FixtureHeightAdjustable
26.75”to74.75”
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Loop with
Side Arms
STEP 1
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Crossbar Assembly
x1
A
PARTS BAG
Fixture Chain
x1
E
Ceiling Canopy
x1
F
Quick Link
x2
D
Outlet Box Screw
x2
B
Wire Connector
x3
C
Fixture Loop
with Side Arms
x1
G
Socket Assembly
x1
H
ICage
x1
JShade
x1
Crossbar Assembly Fixture Chain
STEP 2 STEP 3
Wiring
STEP 4
Shade & Cage
Ceiling Canopy
STEP 5 STEP 6
Bulb
STEP 7
Socket Assembly
STEP 8
Installation Instructions: UQL4190
www.urbanambiance.com
2of4
STEP 1
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
STEP 3
2
Step2-3
Install Fixture Chain
1
Step 1
Adjust fixture chain length
3
Suggested Chain Length:
8’ ceiling:
9’ ceiling:
10’ ceiling:
9.25” Chain
11.25” Chain
22.25” Chain
N
L
N
L
www.urbanambiance.com
3of4
STEP 4
1 2
Step 1
Feed the fixture wires
through the loop
N
L
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
STEP 5
www.urbanambiance.com
4of4
STEP 6
STEP 7
STEP 8
1 2
Separate cage Install shade
www.urbanambiance.com
/
