Kensington K64704WW Installation guide

Brand: Kensington

Model: K64704WW

Type: Installation guide

VeriMark Windows 10

Manual Driver Install.

Install the driver through Windows 10 Manual driver install.-

1. On the VeriMark support page, select VeriMark IT to go to the setup guides and driver download.-

2. Download the driver from the VeriMark IT support page by clicking on the “Manual driver install button”.-

3. The compressed folder will be downloaded to your speciﬁed location.-

4. Extract the ﬁles of the compressed folder to a selected destination.-

5. Double click extracted ﬁle to install driver.

6. Kensington ﬁngerprint key will show on device manager.-

VeriMark™ Windows 10

(Windows Hello) Setup Guide

1. Select and click the START icon and select Settings.

2. Select Accounts.

3. Click on the Sign in options tab.

4. Click on the Windows Hello ﬁngerprint option.

5. Then click Set up button.

6. Click Get Started.

7. Touch the sensor multiple times, follow the scanning instructions.

8. When prompted to try another angle click next and continue scanning and follow instructions.

9. Click on set up PIN.

10. Type password to verify account and click OK.

11. Type a PIN and click ok.

12. If you want the PIN to contain letters and symbols, select the option.

How to Remove your Fingerprint.

1. To remove ﬁnger print click Remove under Windows Hello Fingerprint options

FOR MORE INFORMATION CONTACT: 1-855-692-0054 | sales@kensington.com

All speciﬁcations are subject to change without notice. Products may not be available in all markets. Kensington and the ACCO

name and design are registered trademarks of ACCO Brands. Kensington The Professionals’ Choice is a trademark of ACCO Brands.

VeriMark IT Windows 11

Manual Driver Install.

Install the driver through Windows 11 Manual driver install.-

1. On the VeriMark support page, select VeriMark to go to the setup guides and driver download.-

2. Download the driver from the VeriMark support page by clicking on the “Manual driver install button”.-

3. The compressed folder will be downloaded to your speciﬁed location.-

4. Extract the ﬁles of the compressed folder to a selected destination.-

5. Double click extracted ﬁle to install driver.

6. Kensington ﬁngerprint key will show on device manager.-

VeriMark™ Windows 11

(Windows Hello) Setup Guide

1. Click on Start on the taskbar and click on Settings.

2. Click on Accounts to show sign in options.

3. Click on Sign-in options.

4. Alternatively, you can click on the magniﬁer glass on the taskbar and search for “Windows Hello”.

5. Click on Fingerprint recognition (Windows Hello) and Set up.

6. On the next window click on Get Started.

7. If it is the ﬁrst time using Windows Hello, you need to add a security PIN.

Enter a security key PIN then click OK for next step.

8. Once PIN has been set up enter it on the Windows Hello setup.

9. Touch the ﬁngerprint sensor area repeatedly.

10. Continue lifting and touching the sensor to read ﬁngerprint.

11. Click Close to ﬁnish ﬁngerprint enrollment or Add another ﬁnger to set up another ﬁngerprint.

12. To remove the ﬁngerprint from the USB dongle click on remove.

FOR MORE INFORMATION CONTACT: 1-855-692-0054 | [email protected]

All speciﬁcations are subject to change without notice. Products may not be available in all markets. Kensington and the ACCO

name and design are registered trademarks of ACCO Brands. Kensington The Professionals’ Choice is a trademark of ACCO Brands.

Kensington K64704WW Installation guide

Brand: Kensington

Model: K64704WW

Type: Installation guide

Download PDF

report

in other languages

eesti: Kensington K64704WW paigaldusjuhend

Kensington K64704WW Installation guide

Kensington K64704WW Installation guide

in other languages

Related papers

Other documents