2. Martec
  3. MLXCR34610

Martec MLXCR34610, MLXCR34615, MLXCR34615S Operating instructions

  • Hello! I've reviewed the installation guide for the MARTEC LED Bunker, models MLXCR34610 and MLXCR34615. This document provides step-by-step instructions on how to install these tricolour LED bunker lights, including safety warnings and electrical requirements. The lights come in 10W and 15W options, are IP54 rated for dust and splash protection, and offer a choice of 3000K, 4000K, and 6500K color temperatures. The instructions also specify the need to have a qualified electrician do the installation. I am ready to answer any specific questions you have about these products.
  • What is the recommended installation method?
    What is the IP rating of this bunker light?
    What should I do if the light is not installed according to the guide?
We strongly recommend that you read this manual carefully before installation.
Installation MUST be carried out by a qualied and licensed electrician.
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
Cove LED Bunker (Round Shape)
Installation Guide
Models Parameters
MLXCR34610 10W IP54 Tricolour LED Bunker Round White
MLXCR34615 15W IP54 Tricolour LED Bunker Round White
Installation Instructions
Switch o the mains Mark on the desired mounting surface
Mount the housing onto the wall, select
desired CCT and connect to power as
shown above, Plug power connector
between housing and the light tting.
Step 1 Step 2 Step 3
Step 6
Remove the diuser
Put the diuser back on
Step 4
Drill holes and put the expansion nuts
into the hole
Step 7
Put the ring (or trim) back on
Step 8
Switch on the mains
Step 5
126mm (10W)126mm (10W)
162mm (15W)162mm (15W)
WARNING
• Installation of product MUST follow SAA standards and meet local authority regulations.
• Installation MUST be carried out by a qualied and licensed electrician.
• Light MUST be earthed.
• Light MUST be rmly installed to a at solid surface, wall or ceiling.
• DO NOT immerse any part of the light tting into water or any form of liquid.
• DO NOT look directly into the LED light.
• The warranty is VOID if product is not installed according to this installation guide.
2 Year Replacement Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty-statement/
Models Power
(W)
PF CCT
(K)
Weight
(KG)
Operation
Temperature
(Degree)
IP In-rush
Current (A)
MLXCR34610 10 ≧0.5 3000
4000
6500
0.5 +40° -20° 54 5
MLXCR34615 15 ≧0.5 3000
4000
6500
0.5 +40° -20° 54 5
Data Table
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
Cove LED Bunker (Round Shape)
Installation Guide
/