OzSpy CANTC20M156AM User manual

CANTC20M156AM
Brand
OzSpy
Model
CANTC20M156AM
Category
Camera housings
Type
User manual

OzSpy CANTC20M156AM trail camera is an easy-to-use device with extraordinary features like a 52°FOV lens, 38 IR LEDs, 0.8s trigger time, and captures up to 5 photos and 30s video per trigger. Ideal for home security, wildlife monitoring, and more, it features PIR motion detection, night vision, and supports up to 32GB Micro SD cards.

OzSpy CANTC20M156AM trail camera is an easy-to-use device with extraordinary features like a 52°FOV lens, 38 IR LEDs, 0.8s trigger time, and captures up to 5 photos and 30s video per trigger. Ideal for home security, wildlife monitoring, and more, it features PIR motion detection, night vision, and supports up to 32GB Micro SD cards.

USER MANUAL
GAME TRAIL CAMERA
CANTC20M156AM
Thank you for choosing one of our easy operation highly qualified
products. This 20MP HD digital camera was totally R&D by our diligent
and smart engineers based on feedbacks and requirements from
customers globally. May you also enjoy and adore this product as we do.
And our company is always open-minded with willing to adopt creative
ideas from you.
1: Besides all the functions you may experience from any other similar
product; This digital camera is aimed to offer user the most easy to use
experience with extraordinary features, like 52°FOV Lens, 38pcs IR
LED’s, 0.8S trigger time, and 1 photo/s, up to 5 photos and 30S video file
per trigger.
2: This digital camera is an ideal product for housing security,
warehouse surveillance, and monitoring wild animals with its camouflage
appearance and nice shape. It is convenient to install or fasten, could be
used to take photographs and carry on video files.
a. Instant surveillance camera for home, office, construction site, and
warehouse, etc
b. Motion-triggered infra-red night vision surveillance;
c. Animal observation and hunting;
3: Power Supply
Camera runs on 4pcs AA batteries or DC 5V power or 5V solar panel
Note: Recommend to remove AA batteries when power adapter is used.
4: USB Connection
When camera is connected on PC via USB Cable, only read data files
When camera is connected on adapter via USB cable, only power
supply.
5: How to Start?
A: Open battery box, and put 4pcs AA batteries to Camera
B: Insert TF card to Camera, like the following photo
C: Put the switch to “ON” position, and the indicator light will flash 2
times to go out, Camera will enter PIR detect status.
D: It will take 3 photos and 10s video record when it has PIR detected
E: It will not take photo and video recorder when it doesn’t have PIR
detect, it will enter standby status or shut off
F: It has Overwrite function
6: Specifications:
➢ Image Sensor: 3MP Color CMOS
➢ Photo resolution: 20MP
➢ Video resolution: FHD 1920*1080P 25FPS
➢ Trigger time: 0.8S
➢ Work mode: Photo, Video, Photo+video
➢ PIR angle: 60 degree
➢ Lens: wide 52 degree
➢ IR LED: 38pcs 940nm black Lights, 10M
➢ PIR Distance: 15M
➢ Memory: Max Micro SD 32GB
➢ USB Slot: 5pins USB 2.0
➢ Power Supply: 4pcs AA Batteries or DC 5V
➢ Waterproof: IP54
➢ Stand-by Time: 8Months
➢ Stand-by current: 0.01mA
➢ Size: 110*92*55MM
➢ Weight: 110g
➢ Temperature: -10~+70℃/-14~+158℉
➢ Certification: CE FCC ROHS
7: Set Date and Time, Work Mode:
Set up a text file as name: time, open “time.txt” file, set date
and time format: 2019-11-11 12:59:59 332Y, and save it to micro SD card
root.
332Y work mode as follows:
The first digital number: 1 for photo mode, 2 for video mode, 3 for photo + video (the default
value for 3）
The second digital number: 1 for 1pc picture, 2 for take 2pcs pictures, 3 for 3pcs pictures, 4 for
4pcs pictures, 5 for 5pcs pictures (Max) (the default value for 3).
The third digital number: 1 for 5s video file, 2 for 10s, 3 for 20s, 4 for 30s (the default value for 2)
The fourth letter: Y for show date and time logo on picture and video, N for not show.
Note: change date, time and work mode, only change digital and letter, can not change
format, and save time.txt file.
Change date, time, work mode, must put the switch to off and cut off power
It will not change date, time, and work mode, if no cut off power.
After cut off power, please install the battery box, and insert SD card to camera, and put the switch
to ON, the indicator light will flash two times, and camera will take photo or video record, and can
find the current date and time on picture or video file, and can check work mode for your settings.
8: Warranty Policy:
A: Dear customers:
Thank you for using our trail camera product, to obtain better
warranty service, please carefully read following clauses.
B: Duration of warranty
1: We provide one year warranty service for the main body
2: We do not replace or refund any sold product except for quality
problem
C: Disclaimers
This warranty does not cover the followings cases:
1: Man-made surface corruption, break, distortion, or damages
due to improper installation, operation, and maintenance.
2: Connecting port is distorted or cracked; PCB is distorted,
cracked, damaged or burned; chip is severely burned.
3: The warranty period has expired.
4: Product repaired by unauthorized service provider or personnel,
or disassembled by users themselves
5: The original label or bar code has been removed, damaged or
modified
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

OzSpy CANTC20M156AM User manual

CANTC20M156AM
Brand
OzSpy
Model
CANTC20M156AM
Category
Camera housings
Type
User manual

OzSpy CANTC20M156AM trail camera is an easy-to-use device with extraordinary features like a 52°FOV lens, 38 IR LEDs, 0.8s trigger time, and captures up to 5 photos and 30s video per trigger. Ideal for home security, wildlife monitoring, and more, it features PIR motion detection, night vision, and supports up to 32GB Micro SD cards.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents