SKYDANCE EV2 User manual

SKYDANCE
Brand
SKYDANCE
Model
EV2
Type
User manual
EV2
Page1
2023.9
IP20
27mm
175mm
160mm
45mm
Ta: -30
O
C ~ +55
O
C
Tc: +85
O
C
Technical Parameters
Mechanical Structures and Installations
User Manual Ver 1.0.3
Input and Output
Input voltage
Operation temperature
Case temperature (Max.)
Environment
IP rating Gross weight
Size
Package
0.129kg
L178x W50 x H38mm
LVD
Output voltage
Output current
Input current
Input signal
Output type Constant voltage
Output power
Wiring Diagram
● Parallel connection
2 Channel Constant Voltage Power Repeater
● 12-36V constant voltage power repeater.
● 2 channel, 8A per channel.
● To receive PWM signal control.
● Power repeater in series or in parallel to expand output unlimitedly.
● Apply to single color or color temperature constant voltage LED strip or module.
2 x (96-288)W
2 x (12-36)VDC
2CH,8A/CH
12-36VDC
16.5A
PWM
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Certification CE,EMC,LVD
EN 62368-1:2020+A11:2020Safety standard(LVD)
5 yearsWarranty
Protection
Warranty and Protection
Reverse polarity
Over-heat
Short circuit
PWM input +
CH1/WW PWM input -
CH1/WW LED output -
LED output +
Power input -
Power input +
Installation rack
CH2/CW LED output -
LED output +
PWM input +
CH2/CW PWM input -
LED indicator
0.5-2.0mm²
4-5mm
E V 2
POWE R R E P E AT ER
V+
V+
I NP UT
PW M SI GN AL
Power Repeater
AC100-240V
Power Supply
12-24VDC
Constant Voltage
V2
+
IN P UT
12 -24V D C
OU TP UT
WW C W
0.5-2.0mm²
4-5mm
E V 2
POWE R RE P E AT ER
V+
V+
I NP UT
PW M S IG N AL
+
CW
WW Dual color LED strip
AC100-240V
Power Supply
12-36VDC
Constant Voltage
0.5-2.0mm²
4-5mm
E V 2
POWE R RE P E AT ER
V+
V+
I NP UT
PW M S IG N AL
+
CW
WW Dual color LED strip
AC100-240V
Power Supply
12-36VDC
Constant Voltage
Page2
2023.9
User Manual Ver 1.0.3
● Series connection
Malfunctions analysis & troubleshooting
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, Please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Safety & Warnings
Wrong color 1. Wrong connection of WW/CW wires.
Malfunctions
Causes
Uneven intensity
between front and
rear,with voltage drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
No light
1. Reconnect WW/CW wires.
Troubleshooting
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
1. Check the power.
2. Check the connection.
Note: If the power repeater is over heat or short circuit, the LED indicator will blink.
AC100-240V
Power Supply
12-36VDC
Constant Voltage
AC100-240V
Power Supply
12-36VDC
Constant Voltage
+
CW
WW Dual color LED strip
AC100-240V
Power Supply
12-24VDC
Constant Voltage
V2
+
INPUT
12-24 VD C
OU TP UT
WW C W
0.5-2.0mm²
4-5mm
E V 2
POWE R REP E AT E R
V+
V+
I NP UT
PW M S I GN AL
+
CW
WW Dual color LED strip
+
CW
WW
+
CW
WW
0.5-2.0mm²
4-5mm
E V 2
POWE R REP E AT E R
V+
V+
I NP UT
PW M S I GN AL
+
CW
WW Dual color LED strip
+
CW
WW
1.No poewr.
2.Wrong connection or insecure.
  • Page 1 1
  • Page 2 2

SKYDANCE EV2 User manual

SKYDANCE
Brand
SKYDANCE
Model
EV2
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents