Pulsar 510 User manual

Brand: Pulsar

Model: 510

Type: User manual

Pulsar 510 is a portable vaporizer with variable voltage and a 400mAh battery. Featuring a pre-heat function, it can vaporize concentrates or herbs at temperatures between 1.8 and 4.2V. The OLED display shows the voltage, battery level, and puff counter. With a 15-second draw time and automatic shut-off after 5 minutes of inactivity, it's easy and convenient to use.

PulsarVaporizers.com

PU-0585-23

Important Safety Warnings

Do not expose to extreme temperatures or direct sunlight.

Do not drop the device or accessories.

Do not drop or submerge in any liquid.

Do not modify the electronics in any way.

This device is intended for adults only. Do not sell or provide to minors. Keep all parts,

concentrates, herbs, and liquids away from children and pets. This is not a medical device and is

not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other conditions.

Consult a physician before use, especially if you suer from heart disease or any other medical

condition, or if you are pregnant or breastfeeding. Failure to follow any of these instructions could

result in product damage, property damage, or personal injury, and may void warranty.

USER MANUAL

POWER

BUTTON

LANYARD

DECREASE

VOLTAGE

PUFF COUNTER

CARTRIDGE

CONNECTION

INDICATOR

INCREMENTAL

ADJUSTABLE

VOLTAGE

BATTERY LEVEL

INDICATOR

INCREASE

VOLTAGE

OLED DISPLAY

USB-C charging

COLLAR

ADAPTER

QUICK START

SPECS

Charge. Turn on. Attach cart. Pre-heat. Set voltage. Fire. Enjoy Higher Culture.

Dimensions: 61.5 x 20 x 21mm

(2.4 x 0.75 x 0.8 in)

Battery Capacity: 400mAh

Resistance: >1 Ohms

Variable Voltage: 1.8 to 4.2V

in 0.1V increments

15-second pre-heat

15-second vape time

5-minute auto shut-o

1.5-hour charge time

Short circuit protection

What’s In The Box:

510 Payout 2.0 Device

USB-C Charge Cable

Collar Adapter

Wrist Lanyard - 6in

Scan the QR code on the packaging for the most current version of the manual,

or go to https://www.pulsarvaporizers.com/pages/manuals

1. Connect the Payout 2.0 to the USB-C charge cable and to a power source. Fully charge

the device before use, approximately 1.5 hours. Disconnect from the power source before using.

2. Click the power button 5 times to turn on. (If you click it once, the Payout 2.0 will remind

you to click 5 times to turn it on)

3. Screw in your 510-threaded cartridge, until the display indicates that the cartridge is

successfully attached. If using a wider cartridge, first screw in the collar adapter, then

insert the cartridge.

4. Click the power button twice to activate the pre-heat function (1.8V for 15 seconds).

5. Use the PLUS or MINUS buttons to set your preferred voltage, between 1.8 and 4.2V.

6. Hold down the power button to fire the vape, for up to 15 seconds at a time, and draw

from the cartridge mouthpiece. After 15 seconds, the battery will stop firing. Repeat as desired.

7. After use, click the power button 5 times to turn o and extend the life of your battery. The

Payout 2.0 will turn o automatically after 5 minutes of inactivity.

Pu Counter: The pu counter will go up every time you fire the vape, (even if you take

multiple pus). Using the pre-heat function does not activate the pu counter. To reset the

pu counter, hold down the PLUS and MINUS buttons simultaneously.

Battery Level Indicator: While charging, the OLED screen will display the battery level.

If charging while o, the battery square will flash to show the current level and the screen

will automatically shut o after 5 seconds. To check the battery level, simply press the

power button.

Lanyard: Attach the included lanyard using the lanyard hole, and take your Payout 2.0

almost anywhere!

How To Use:

Features

Pulsar 510 User manual

Pulsar 510 User manual

Related papers

Other documents