Toro TR50XT User manual

Type
User manual

This manual is also suitable for

Toro TR50XT is a high-performance rotor sprinkler designed for residential and commercial irrigation systems. It features a durable construction with a stainless steel riser and a heavy-duty gear drive for reliable operation. The TR50XT offers a wide range of adjustment options, including adjustable watering arcs from 30° to 360°, allowing you to customize the coverage area to suit your specific needs. The nozzle trajectory angle can also be adjusted between 5° and 25° to optimize the spray height and distance.

Toro TR50XT is a high-performance rotor sprinkler designed for residential and commercial irrigation systems. It features a durable construction with a stainless steel riser and a heavy-duty gear drive for reliable operation. The TR50XT offers a wide range of adjustment options, including adjustable watering arcs from 30° to 360°, allowing you to customize the coverage area to suit your specific needs. The nozzle trajectory angle can also be adjusted between 5° and 25° to optimize the spray height and distance.

TR50XT
SERIES ROTOR
Align the cap arrow with the left side
of the watering area. This is the non-
adjustable side of the watering arc.
Turn the arc adjustment ring to align
the white arrow to the right side of
the watering arc.
The nozzle trajectory angle can be adjusted between 5° and 25°.
Turn the adjustment screw right to decrease the angle and shorten
spray radius, or left to increase the angle and lengthen spray radius.
The watering area can be adjusted between 30° and 360°.
When set to 360°, the nozzle does not reverse direction.
Instruction Guide
Watering Arc Adjustment
Nozzle Trajectory Adjustment
The watering area is between the cap arrow and the right stop
arrow on the arc adjustment ring. This example is set to 180°.
Align the right stop arrow to the right
side of the watering arc.
Right Stop Arrow
Español
English
Français Deutsch Italiano
português
© 2004 The Toro Company, Irrigation Division An ISO 9000-certified Company www.toro.com Form Number 373-0291 Rev. B
The TR50XT sprinkler comes with
eight additional nozzle sizes from
1 to 9 GPM (4.5 to 41 LPM). To
change the nozzle, use the blade
end of the sprinkler tool or a
screwdriver to turn the nozzle
screw out until it clears the nozzle.
Pry the nozzle out at the bottom
and install the new nozzle. Return
the nozzle screw to its previous
position.
Turn the nozzle screw in to diffuse and
shorten the spray radius.
Turn the center screw right to shut
off flow. Turn the screw left to open
flow.
To eliminate check valve
function, install the check
valve disk in position B.
Remove and
flush screen
as needed.
Changing Nozzle
Adjusting Spray
Cleaning Screen
Check Valve
Flow Shut Off
To maintain left
stop, align riser
with body as
shown when
reassembling.
102-1303
102-1877
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro TR50XT User manual

Type
User manual
This manual is also suitable for

Toro TR50XT is a high-performance rotor sprinkler designed for residential and commercial irrigation systems. It features a durable construction with a stainless steel riser and a heavy-duty gear drive for reliable operation. The TR50XT offers a wide range of adjustment options, including adjustable watering arcs from 30° to 360°, allowing you to customize the coverage area to suit your specific needs. The nozzle trajectory angle can also be adjusted between 5° and 25° to optimize the spray height and distance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages