K16
Revised 2/08
© 2008 AS America Inc.
CADET™
ELONGATED ONE-PIECE TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
79mm
(3-1/8)
762mm
(30)
FINISHED WALL
206mm
(8-1/8)
19 ± 6mm
(3/4 ± 1/4)
375mm
(14-3/4)
473mm
(18-5/8)
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTERS
305mm
(12)
C/L OF OUTLET
324mm
(12-3/4)
159mm
(6-1/4)
16mm
(5/8)
FINISHED
FLOOR
679mm
(26-3/4)
241mm
(9-1/2)
497mm
(15-5/8)
140mm
(5-1/2)
SUPPLY AS
REQ'D
457mm
(18)
*
133mm
(5-1/4)
*
FINI SHED
FLOO R
CADET™ ELONGATED ONE-PIECE TOILET
❑ 2100.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• One-piece design
• Elongated siphon action jetted bowl with
2" trapway
• Rim height at 381mm (15")
• Includes color-matched solid plastic “Rise and
Shine” seat and cover (#5324.019) with
easy-to-clean lift off hinge system
• Color-matched trip lever
• 2 bolt caps
• Internal trapway area fully glazed
• 100% factory ush tested
Nominal Dimensions:
762 x 457 x 679mm
(30" x 18" x 26-3/4")
Fixture only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specied:
❑ Color:
❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❑ Trip Lever: 047242-XXX0A
❑ Color-matched (supplied)
❑ 002 Chrome
❑ 099 Polished Brass
❑ 295 Satin Nickel
❏ Supply with Stop: