Product Information
Applicable product:
Pull-down kitchen sink faucet K-780
Lever handle is ADA compliant.
Optional accessories:
Deep roughing-in kit – provides an additional
2″ (5.1 cm) assembly depth
1012715
Low flow kit – reduces maximum flow to 1.5
gpm (5.7 L) at 60 psi (4.1 bar)
1167289
High flow kit – increases maximum flow to
2.2 gpm (8.3 L) at 60 psi (4.1 bar)
1167290
Installation Notes
Install this product according to the installation guide.
ADA compliant when installed to the specific requirements of
the regulation.
COLD
Supply Hoses with
3/8" Compression Fitting
4-1/8"
(105 mm)
16-3/4"
(425 mm)
10-1/2"
(267 mm)
31-1/4"
(794 mm)
2-1/2" (64 mm)
Max
6-13/16"
(173 mm)
7-7/8"
(200 mm)
10-3/16"
(259 mm)
Ø 2" (51 mm)
for single-hole
installation
2-1/2" (6.4 cm)
for 3-hole
escutcheon
Ø 1-5/16"
Roughing-In
K-780
CRUETTE
TM
PULL-DOWN KITCHEN SINK FAUCET
CRUETTETM PULL-DOWN KITCHEN SINK FAUCET
1159577-1-
B
/