Kohler 22975-CP Specification

Category
Faucets
Type
Specification

This manual is also suitable for

Features
High-arch swing spout with 150-degree rotation offers superior
clearance for filling pitchers, chilling bottles, and cleanup.
Single lever handle makes adjusting water temperature easy.
Temperature memory allows faucet to be turned on and off at
the temperature set during prior usage.
KOHLER
®
ceramic disc valves exceed industry longevity
standards, ensuring durable performance for life.
1.5 gpm (5.7 lpm) maximum flow rate at 60 psi (4.1 bar).
Material
Premium metal construction for durability and reliability.
KOHLER finishes resist corrosion and tarnishing.
Installation
CSA B651
Single-hole or three-hole installation (escutcheon plate
included).
Codes/Standards
Flexible supply lines simplify installation.
ASME A112.18.1/CSA B125.1
NSF/ANSI 61
Adapters, Rough-in and Extension Kits
NSF/ANSI 372
Range: 2-1/2" (64 mm) - 4-13/16" (122 mm)1327990
All applicable US Federal and State material
regulations
Recommended Products/Accessories
K-77685 Single-Cartridge Water Filtration System
DOE - Energy Policy Act 1992
California Energy Commission (CEC)
K-77686 Double-Cartridge Water Filtration System
ADA
K-77687 single replacement filter cartridge
ICC/ANSI A117.1
K-77688 Replacement Filter Cartridges, Two-Pack
CSA B651
Optional Products/Accessories
1012715 Kitchen Faucet Deep Rough-In Kit
KOHLER
®
Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® StainlessVS
Matte BlackBL
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-18-2020 06:12 - US/CA/LM
Crue
Single-handle bar sink faucet
K-22975
14-1/8"
(359 mm)
7-7/16"
(189 mm)
3-3/4" (95 mm)
2-1/2"
(64 mm)
Max
10-1/2"
(267 mm)
7-7/8"
(200 mm)
Ø 1-5/16"
24-7/8"
(632 mm)
2-3/4"
(70 mm)
7-7/8"
(200 mm)
3/8"Compression
Fittings
2-1/2"
(64 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
125 psi (861.8 kPa)Fixture pressure max
(static):
ADA, CSA B651 compliant when installed to the
specific requirements of these regulations.
Pressure and Supply Requirements
20 psi (137.9 kPa)Fixture pressure min
(static):
Fixture Supply Requirements
20 psi (137.9 kPa)Min static pressure:
125 psi (861.8 kPa)Max static pressure:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-18-2020 06:12 - US/CA/LM
Crue
Single-handle bar sink faucet
K-22975
  • Page 1 1
  • Page 2 2

Kohler 22975-CP Specification

Category
Faucets
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI