Canon 1 User manual

Brand: Canon

Model: 1

Type: User manual

This manual is also suitable for

Deluxe Sports Roadster 1

Canon Deluxe Sports Roadster 1: Experience the joy of crafting a classic car replica with this detailed papercraft model. Unleash your creativity and precision as you assemble each component, following the comprehensive instructions provided. The result will be a stunning display piece that captures the essence of a timeless automobile.

Classic Car Series : 01

Assembly

Instructions

Chevrolet Confederate

Deluxe Sports Roadster

Canon Inc.

Toshimasa Mitsutake

Mountain fold

Valley fold

Cut a notch

along this line.

Cut a notch

along the line.

Dotted line

Dashed and

dotted line

Solid line

Scissors mark

Fold so that the printed pattern faces outside. Dots indicate parts to be glued;

dotted lines indicate approximate area for

application of glue.

Glue parts with the same number together.

Glue areas within the same part together.

Glue to the reverse side of the specified part.

Fold so that the printed pattern faces inside.

Cut along the center of the line.

Red dot

Green dot

Blue dot

Cut these areas out.

Glue, scissors and other tools may be dangerous

to young children so be sure to keep them out of

the reach of young children.

Assembly Instructions : Six A4 sheets (No. 1 to No. 6)

Build this model with careful reference to the Assembly Instructions.

ToolsAssembly tip

Key to symbols

Write the number of each part on the reverse side of the part in pencil upon

cutting it out, to be sure you can tell which part is which later.

Before gluing, crease the paper along mountain and valley fold lines. Trace

along the folds with a ruler and an exhausted ballpoint pen (out of ink) to get a

sharper fold.

Make sure rounded sections are nice and stiff.

Scissors

Ruler, set square

Glue (Wood glue or craft glue recommend)

Exhausted ballpoint pen (out of ink)

Toothpicks (for use in applying glue)

Tweezers (useful for handling small parts)

Pencil

View of completed model

* This model was designed for Papercraft and may differ from the original in some respects.

Chevrolet Confederate

Assembly

Instructions

Canon Inc.

Toshimasa Mitsutake

Carefully shape curves.

Press center and align | marks.

Affix with glue.

Align fold lines

and flaps and

glue together.

Shaded areas in diagrams indicate reverse

side of parts.

Chevrolet Confederate

Assembly

Instructions

Canon Inc.

Toshimasa Mitsutake

Carefully shape curves.

Chevrolet Confederate

Assembly

Instructions

Canon Inc.

Toshimasa Mitsutake

*Assemble right (R) and left (L) parts (diagram is R).

*Assemble right (R)

and left (L) parts (diagram is L).

Glue this edge first.

Carefully shape curves.

Glue this edge first.

Chevrolet Confederate

Assembly

Instructions

Canon Inc.

Toshimasa Mitsutake

Affix with glue.

Wiper blade illustration

should face front.

Carefully shape curves.

Confirm top/bottom before gluing. Confirm top/bottom before gluing.

Carefully shape curves.

*Confirm right/left

before gluing.

Top

Chevrolet Confederate

Assembly

Instructions

Canon Inc.

Toshimasa Mitsutake

Fold each in two and glue before assembling.

Affix all four tires, adjusting to

be sure they touch the ground.

Fold each in two and

glue before assembling.

Arrow indicates 'up'.

Arrow

indicates 'up'.

Arrow indicates 'up'.

Affix with glue.

*Assemble right (R)

and left (L) parts

Carefully shape curves.

*diagram is L

Glue in order, - .

Pink flap indicates outer side.

Joint should be positioned

at the top.

Joint should be positioned

at the top.

Affix outer surface of tire like a bowl,

then wait until glue is dry before gently

pulling the tire into shape.

Top

Confirm top/bottom before gluing.

Canon 1 User manual

Brand: Canon

Model: 1

Type: User manual

This manual is also suitable for

Deluxe Sports Roadster 1

Download PDF

report

Canon 1 User manual

This manual is also suitable for

Canon 1 User manual

Other documents