2. Harbor Freight Tools
  3. Fuel Line and A/C Quick Disconnect Tool 6 Pc

Harbor Freight Tools Fuel Line and A/C Quick Disconnect Tool 6 Pc User manual

  • Hello! I am an AI chatbot trained to assist you with the Harbor Freight Tools Fuel Line and A/C Quick Disconnect Tool 6 Pc User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ITEM 97576
6-PIECE A/C &
FUEL LINE QUICK
DISCONNECT SET
WARNING
To prevent serious injury:
Wear ANSI-approved safety goggles and heavy-duty 1.
work gloves during use.
Relieve line pressure before use.2.
Service of air conditioning systems must be done 3.
only by trained and experienced technician.
Technicians opening refrigeration circuit in 4.
automotive air conditioning systems MUST be
certied in refrigerant recovery and recycling
procedures in compliance with section 609 of Clean
Air Act Amendments of 1990.
Inspect before use; do not use if parts loose or 5.
damaged.
Use for intended purposes only.6.
Read vehicle service manual before use.7.
Includes: 7/8”, 3/4”, 5/8” 1/2”, 3/8” and
5/16” Sizes
08a SAVE THESE WARNINGS. Made in China.
INSTRUCTIONS:
1. Select the correct size connector by matching
tool’s inner lip to diameter of spring or open side of
tting.
2. Slip connector over line with inner lip facing spring
or open line tting. See Fig. A, above. Press inner
lip of connector into line tting until it “clicks” into
place as line releases.
3. Disconnect the line sections. To reconnect, push
line ttings together. See Fig. B, below.
Fitting
Inner Lip
Figure A
Figure B
/