Casio IT-3000 User manual

Brand: Casio

Model: IT-3000

Category: Print & Scan

Type: User manual

Handheld Printer Terminal

User’s Guide

Series

Be sure to read “Safety

Precautions” inside this

guide before trying to use

your Handheld Printer

Terminal. After reading this

guide, keep it in a safe

place for future reference.

PN410385-007

IT-3000_E_Hyo_1_4.p65 07.10.3, 5:33 PM3

• This Product is equipped with the Brycen B-RAPPORE Stack and My Wirefree

Network Bluetooth User Interface Application, the use of which is governed by a license

granted by Brycen Co., Ltd.

• BLUETOOTH is a registered trademark owned by Bluetooth SIG, Inc. and licensed to

CASIO COMPUTER CO., LTD.

• Microsoft and Windows are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

• Datalight is a registered trademark of Datalight, Inc.

• FlashFX

is a trademark of Datalight, Inc.

U.S. Patent Office 5,860,082

• Other company names and product names used in this guide are trademarks or registered

trademarks of their respective owners.

Information in this document is subject to change without advance notice. CASIO Computer Co.,

Ltd. makes no representations or warranties with respect to the contents or use of this manual and

specifically disclaims any express or implied warranties of merchantability or fitness for any

particular purpose.

IT-3000_E_P00.p65 07.10.19, 9:57 AM2

E-1

Warning

Caution

Danger

Congratulations upon your selection of this CASIO product. Be sure to read the

following Safety Precautions before trying to use it for the first time.

Markings and Symbols

The following are the meanings of the markings and symbols used in these Safety

Precautions.

This symbol indicates information that, if ignored or applied

incorrectly, creates the danger of death or serious personal injury.

This symbol indicates information that, if ignored or applied

incorrectly, creates the possibility of death or serious personal

injury.

This symbol indicates information that, if ignored or applied

incorrectly, creates the possibility of personal injury or property

damage.

• A diagonal line indicates something you should not do. The symbol shown

here indicates you should not try to take the unit apart.

• A black circle indicates something you should do. The symbol shown here

indicates you should unplug the unit from the wall outlet.

Precautions During Use

Warning

Disassembly and Modification

• Never try to disassemble or modify the Handheld Printer Terminal and its

options in any way. High voltage inside creates the danger of electric shock.

Abnormal Conditions

• Should the Handheld Printer Terminal and its options become hot or start to

emit smoke or a strange odor, immediately turn off the power, and contact

your original vendor or an authorized CASIO service provider. Continued

use creates the danger of fire and electric shock.

Safety Precautions

IT-3000_E_P01_08.p65 07.10.3, 5:34 PM1

E-2

Safety Precautions

Warning

Foreign Objects

• Should any foreign matter get into the Handheld Printer Terminal and its

options, immediately turn off the power and contact your original vendor or

an authorized CASIO service provider. Continued use creates the danger of

fire and electric shock.

Dropping and Damage

• Should you drop the Handheld Printer Terminal and its options and damage

them, immediately turn off the power and contact your original vendor or an

authorized CASIO service provider. Continued use creates the danger of fire

and electric shock.

Moisture

• Though your Handheld Printer Terminal is water splash-resistant, its Bridge

Satellite Cradle and other optional peripherals are not. Keep loose metal

objects and containers filled with liquids away from your Handheld Printer

Terminal and the optional peripherals.

Also, never connect or disconnect peripherals to the Handheld Printer

Terminal while they are wet. Water getting into the Handheld Printer

Terminal or its peripherals creates the danger of fire and electric shock.

IT-3000_E_P01_08.p65 07.10.3, 5:34 PM2

E-3

Operation of Wireless Data Communication Function

Warning

Interference with the Operation of Other Equipment

(Using Wireless Data Communication Function)

• Please follow the instructions provided by health care facilities when using

your Handheld Printer Terminal in hospitals or other locations where

medical equipment is in use. In particular, either switch off the wireless data

communication function of the Handheld Printer Terminal or turn off the

power in locations such as operating rooms, intensive care units, coronary

artery disease monitoring units and other locations where use of the

Handheld Printer Terminal is prohibited by the health care facility. Radio

waves emitted by the Handheld Printer Terminal can affect the operation of

medical equipment.

• Keep your Handheld Printer Terminal at least 22 centimeters (8

") away

from anyone wearing a pacemaker. Radio waves emitted by the Handheld

Printer Terminal can affect the operation of a pacemaker.

• The use of wireless communication devices and electronic devices in aircraft

is recommended to consult first with flight attendant prior to the use.

Caution

Interference with the Operation of Other Equipment

(Using Wireless Data Communication Function)

The Handheld Printer Terminal contains a built-in wireless communication device of

a low-power data communication system. The frequency band that is used is also used

by microwave ovens and other industrial, scientific and medical devices, as well as

other wireless stations of the same type, local wireless stations for identifying moving

objects requiring licensing used on factory production lines and so forth, specified

low-power wireless stations not requiring licensing, and amateur wireless stations (to

be referred to as “other wireless stations”).

• Confirm that other wireless stations are not in use nearby before using the

Handheld Printer Terminal.

•

In the case radio wave interference has been generated between the Handheld Printer

Terminal and other wireless stations, either promptly change the location where the

Handheld Printer Terminal is used or discontinue operation of the equipment causing

the interference.

•

If other problems should occur as a result of the generation of radio wave interference,

please contact the location indicated in the section on product consultations.

IT-3000_E_P01_08.p65 07.10.3, 5:34 PM3

E-4

Safety Precautions

Caution

Foreign Objects

• Take care to ensure that metals or combustible objects are not inserted into

the openings of the Handheld Printer Terminal and its options. Such objects

inside of the Handheld Printer Terminal and its options create the danger of

fire and electric shock.

Location

• Do not locate the Handheld Printer Terminal and its options on a surface that

is unstable or uneven. Doing so creates the danger of the Handheld Printer

Terminal falling, which can cause personal injury.

• Do not locate the Handheld Printer Terminal and its options in an area

subject to large amounts of humidity or dust. Doing so creates the danger of

fire and electric shock.

• Do not leave the Handheld Printer Terminal and its options for a long period

in a car parked in direct sunlight.

Heavy Objects

• Never place heavy objects on top of the Handheld Printer Terminal and its

options. Doing so creates the danger of loss of balance and the objects

falling, which can cause personal injury.

LCD Screen

• Never apply strong pressure to the screen or subject it to strong impact.

Doing so can crack the screen or LCD panel glass, which can cause the

danger of personal injury.

• Should the LCD panel glass break, never touch the liquid inside. Doing so

can cause skin inflammation.

– Should liquid from the LCD panel accidentally get into your mouth,

immediately wash your mouth with water and then consult a physician.

– Should liquid from the LCD panel accidentally get into your eyes or onto

your skin, immediately rinse for at least 15 minutes with clean tap water

and then consult a physician.

Do Not Touch Internal Components

• Never touch any high-voltage components. This can cause an electric shock.

Printer

• Do not touch the areas around the printer motor or head since they can

become very hot. Doing so can cause burns.

• Touching any of the gears while they are turning with unprotected hands can

cause personal injury. Be careful not to come in contact with turning gears.

• Contact with the blade installed in the paper outlet can cause personal injury.

Be careful not to touch the blade.

IT-3000_E_P01_08.p65 07.10.3, 5:34 PM4

E-5

Lithium-ion Battery Pack

Danger

• Never allow the battery pack to become wet. Water can create the danger of

battery pack heat emission, explosion, and fire.

• Never use or leave the battery pack next to open flame, near a stove, or any

other area exposed to high heat. Doing so creates the danger of battery pack

heat emission, explosion, and fire.

• Never use the battery pack with any device other than the Handheld Printer

Terminal. Doing so can create the danger of battery pack heat emission,

explosion, and fire.

• Note that the battery pack’s positive (+) and negative (–) polarities must be

oriented correctly when it is loaded into battery charger or the Handheld

Printer Terminal. Connecting the battery pack with its polarities reversed

creates the danger of battery pack fluid leakage, heat emission, explosion,

and fire.

• Never dispose of the battery pack by incinerating it or otherwise expose it to

heat. Doing so creates the danger of battery pack heat emission, explosion,

and fire.

• Never allow the positive (+) and negative (–) terminals of the battery pack to

become connected (shorted) by metal. Doing so creates the danger of battery

pack heat emission, explosion, and fire.

• Never transport or store the battery pack together with a necklace, hair pins

or other metal objects. Doing so can short battery pack terminals, creating

the danger of battery pack heat emission, explosion, and fire. Be sure to

place the battery pack in its case whenever transporting or storing it.

• Never throw the battery pack or otherwise subject it to strong impact. Doing

so creates the danger of battery pack heat emission, explosion, and fire.

• Never pierce the battery pack with nails, hit it with a hammer, or step on it.

Doing so can create the danger of battery pack heat emission, explosion, and

fire.

• Never try to take apart the battery pack or modify it in any way. Doing so

creates the danger of battery pack heat emission, explosion, and fire.

• Use only the specified battery charger to charge the battery pack. Use of

other type of battery charger creates the danger of battery pack heat

emission, explosion, and fire.

IT-3000_E_P01_08.p65 07.10.3, 5:34 PM5

E-6

Safety Precautions

Warning

• Never place the battery pack in a microwave oven or any other high-voltage

device. Doing so creates the danger of battery pack heat emission,

explosion, and fire.

• Should the battery pack emit a strange odor or heat, change color or shape,

or exhibit any other abnormal behavior, immediately stop using it.

Continued use creates the danger of battery pack heat emission, explosion,

and fire.

• If the amount of time period the battery pack can serve becomes

considerably short, stop using it. It may indicate the possibility of a

malfunction in the battery pack. Continued charging the battery pack

creates the danger of heat emission, explosion, and fire.

• If the battery pack does not achieve full charge after the normal charging

time has passed, stop charging it. Continued charging creates the danger of

battery pack heat emission, explosion, and fire.

• Should the battery pack start to leak or emit a strange odor, immediately

move it away from any nearby flame. Leaking battery fluid is combustible,

and exposure to flame creates the danger of explosion and fire.

• Should fluid from the battery pack accidentally get into your eyes, do not

rub them. Immediately rinse your eyes with clean tap water and then

consult a physician immediately.

Caution

• Never use or leave the battery pack in an area exposed to direct sunlight, in

a car parked in direct sunlight, or any other very hot area. Doing so creates

the danger of heat emission and fire, as well as deterioration of battery pack

performance and shortening of its service life.

• Do not use the battery pack in areas where static electricity is being

generated. Doing so creates the danger of battery pack heat emission,

explosion, and fire.

• Danger of explosion if the battery pack is incorrectly replaced.

Replace only with same or equivalent type recommended by CASIO.

Dispose of used batteries according to the CASIO instruction.

• Should fluid from the battery pack accidentally get onto clothing or your

skin, immediately rinse it off with clean tap water. Prolonged contact with

battery pack fluid can cause skin irritation.

• Keep the battery pack out of the reach of small children. Do not let small

children remove the battery pack from battery charger or the Handheld

Printer Terminal.

IT-3000_E_P01_08.p65 07.10.3, 5:34 PM6

E-7

AC Power Supply

Warning

•

Do not use the Handheld Printer Terminal at a voltage other than the

specified voltage. Also, do not connect the Handheld Printer Terminal to a

multi-plug power strip. Doing so creates the danger of fire and electric shock.

• Avoid conditions that can cause damage or breaks in the power cord. Do not

place heavy objects on the power cord and keep it away from sources of

heat. Any of these conditions can damage the power cord, creating the

danger of fire and electric shock.

• Never modify, sharply bend, twist, or pull on the power cord. Doing so

creates the danger of fire and electric shock.

• Power cable (especially on the plug)

Never use a detergent to clean AC adaptor, especially on the plug and the jack.

• When using the battery charger and Bridge Satellite Cradle, be sure to use

the respective AC adaptors. Use of other AC adaptor model creates the

danger of fire and electric shock.

• Should the power cord become severely damaged (to the point that wires are

exposed or broken), contact your original vendor or an authorized CASIO

service provider about repair or replacement. Use of a damaged electrical

cord creates the danger of fire and electric shock.

Caution

• Keep the power cord away from stoves and other sources of extreme heat.

Heat can melt the covering of the power cord and create the danger of fire

and electric shock.

• Never pull on the power cord when unplugging it. Doing so can damage the

cord and create the danger of fire and electric shock. (Always hold the plug

when unplugging it from the wall outlet.)

• Never touch the plug while your hands are wet. Doing so can create the

danger of electric shock.

• Be sure to unplug the power cord from the wall outlet before moving.

Failure to do so can result in damage to the power cord caused by pulling on

it, which creates the danger of fire and electric shock.

• Be sure to unplug the power cord from the wall outlet before cleaning the

battery charger and Bridge Satellite Cradle.

• Be sure to turn the power off and unplug the power cord after use.

• For safety reasons, unplug the power cord from the wall outlet when not

using for a long period of time.

IT-3000_E_P01_08.p65 07.10.16, 15:097

E-8

AC Adaptor

Caution

• The housing of the AC adaptor can become warm during normal use.

• Take normal precautions against electric shock.

• At least once a year, unplug the AC adaptor from the wall outlet and clean

any dust that builds up between the prongs of the plug.

Dust built up between the prongs can lead to the danger of fire.

Backup Copies of All Important Data

Caution

• Note that CASIO Computer Co., Ltd. shall not be held liable to you or any

third party for any damages or loss caused by deletion or corruption of data

due to use of the Handheld Printer Terminal, malfunction or repair of the

Handheld Printer Terminal or its peripherals, or due to the batteries going

dead.

• The Handheld Printer Terminal employs electronic memory to store data,

which means that memory contents can be corrupted or deleted if power is

interrupted due to the batteries going dead or incorrect battery replacement

procedures. Data cannot be recovered once it is lost or corrupted. Be sure to

make backup copies of all important data.

Safety Precautions

IT-3000_E_P01_08.p65 07.10.3, 5:35 PM8

E-9

Your Handheld Printer Terminal and its options are precision digital instruments.

Improper operation or rough handling can cause problems with data storage and other

problems. Note and observe the following precautions to ensure proper operation.

• Do not continue operating the Handheld Printer Terminal when battery power

is low.

Doing so can cause data to be lost. When the battery goes low, charge it as soon as

possible.

• Do not leave dead batteries in the Handheld Printer Terminal for a long period.

Dead batteries can leak, leading to malfunction and damage to the Handheld Printer

Terminal.

• Use the Handheld Printer Terminal and its options only within the specified

temperature range.

Use outside of the specified temperature range creates the risk of malfunction.

• Avoid using the Handheld Printer Terminal and its options in areas subject to

the following conditions.

The following conditions create the risk of damage to the Handheld Printer Terminal.

— Large amounts of static electricity

— Extreme heat or extreme cold

— High humidity

— Sudden temperature extremes

— Large amounts of dust

• Use only the special stylus that comes with the Handheld Printer Terminal to

operate its touch screen and reset switch.

• Do not use any tool other than the special stylus to operate the touch screen.

Other tools can scratch the touch screen and lead to malfunction.

• Never use thinner, benzene, cosmetic cleaning fluids, or other volatile agents to

clean the Handheld Printer Terminal.

To clean the Handheld Printer Terminal, wipe it with a dry cloth, or a cloth

moistened in a weak solution of water and a mild neutral detergent. Wring all

excess moisture from the cloth before wiping.

Operating Precautions

IT-3000_E_P09_13.p65 07.10.16, 15:099

E-10

• The contents of this guide are subject to change without notice.

• Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or any third

parties for any losses or damages arising from the use of this guide.

• Although the utmost care has been taken in preparing this manual, please contact the

manufacturer if you should happen to notice any inconsistencies or errors.

• This guide does not include any information about programming and download

procedures. See the applicable separate documentation for information about the

procedures.

Warranty and After Service

• Should this product ever malfunction, contact your original retailer providing

information about the product name, the date you purchased it, and details about the

problem.

This mark applies to EU countries only.

Important

IT-3000_E_P09_13.p65 07.10.16, 15:1010

E-11

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not

applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC

emission limits.

Caution Exposure to radio frequency radiation (below is for portable device)

To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating

in conjunction with any other antenna or transmitter.

Declaration of Conformity

Model Numbers: IT-3000M53E, IT-3000M54E2, IT-3000M55U, IT-3000M56U, HA-B61IO,

HA-B30CHG

Trade Name: CASIO

Responsible party: Casio America, Inc. Industrial Handheld Division

Address: 2700 Augustine Drive Suite 155, Santa Clara, California 95054

Telephone number: 408-737-6300

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

For Customers in Canada

These Class B digital apparatuses comply with Canadian ICES-003.

Cet appareil numériqué de la classes B est conformé à la norme NMB-003 du Canada.

These devices comply with RSS 210 of Industry Canada (IC).

Operation is subject to the following two conditions:

(1) These devices may not cause interference, and

(2) These devices must accept any interference, including interference that may cause undesired

operation of this device.

Regulatory Information

The USA and Canada

IT-3000_E_P09_13.p65 07.10.3, 5:35 PM11

E-12

Regulatory Information

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :

(1) il ne doit pas produire de brouillage et

(2) I’utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce

brouillage est susceptible de compromettre le fonctionnement du dispositif.

Exposure to radio frequency radiation

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does

not emit RF field in excess of Health Canada limits for the general population;

consult Safety Code 6, obtainable from Health Canada's website at www.hc-sc.gc.ca/rpb.

Europe

We, the undersigned.

Company CASIO Europe GmbH

Address, City Bornbarch 10, 22848 Norderstedt

Country Germany

Phone number +49(0)40-528-65-0

Fax number +49(0)40-528-65-424

certify and declare under our sole responsibility that the following equipments:

Product description / Intended use

EU/EFTA member states intended for use EU: Austria, Belgium, Bulgaria, Cyprus,

Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, Netherlands,

Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, United Kingdom

EFTA: Switzerland, Iceland, Lichtenstein, Norway

Member states with restrictive use NONE

Manufacturer CASIO COMPUTER CO., LTD.

Brand CASIO

Type IT-3000M53E, IT-3000M54E2, IT-3000M55E,

IT-3000M56E

are tested and found to conform with the essential requirements for protection of health and the safety of

the user and any other persons and Electromagnetic Compatibility, as included in following standards:

Standard Issue date

EN 60950-1 2001

EN 301 489-17 v1.2.1: 2002.08

and are tested and found to conform with the essential radio test suites so that they effectively use the

frequency spectrum allocated to terrestrial/space radio communication and orbital resources so to as to

avoid harmful interference, as included in following standards:

IT-3000_E_P09_13.p65 07.10.3, 5:35 PM12

E-13

Products are for distribution within

all member states of the EU.

France limited to 2446.5-2483.5 Mhz Indoor use.

Belgium limited to 2400-2483.5 Mhz Indoor, 2460-2483.5 Mhz Outdoor use.

The information described above dates from January 2003 and may be subjected to future

changes.

Standard lssue date

EN 300 328 v1.7.1: 2006.10

and therefore comply with the essential requirements and provisions of the Directive 1999/5/EC of the

European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications

Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex III

(Conformity Assessment procedure referred to in article 10).

The technical documentation as required by the Conformity Assessment procedure is kept at the following

address:

Company CASIO Europe GmbH

Address, City Bornbarch 10, 22848 Norderstedt

Country Germany

Phone number +49(0)40-528-65-0

Fax number +49(0)40-528-65-424

IT-3000_E_P09_13.p65 07.10.3, 5:35 PM13

E-14

Contents

Safety Precautions .........................................................................................E-1

Operating Precautions ................................................................................... E-9

Important ....................................................................................................... E-10

Warranty and After Service .............................................................................. E-10

Regulatory Information ................................................................................ E-11

Before Getting Started .................................................................................E-16

Handheld Printer Terminal System Configuration ....................................E-19

Options ............................................................................................................. E-19

General Guide ............................................................................................... E-23

IT-3000M53E/M54E2/M55E/M55U/M56E/M56U ......................................... E-23

Key Functions ................................................................................................... E-26

Replacing the Battery .................................................................................. E-27

Replacing the Battery Pack............................................................................... E-27

Attaching the Hand Strap ............................................................................E-30

Attaching the Neck Strap ............................................................................E-31

Attaching the Stylus Holder ............................................................................. E-32

Configuring Handheld Printer Terminal Settings ......................................E-34

Calibrating Touch Screen Alignment ................................................................ E-34

Adjusting Display Contrast .............................................................................. E-35

Adjusting Display Brightness ........................................................................... E-35

Display Auto Dimmer ....................................................................................... E-35

Using the Printer .......................................................................................... E-36

When Using Roll Paper .................................................................................... E-36

When Using Formed Sheet Paper ..................................................................... E-39

Precautions When Using Printer ....................................................................... E-43

Using the C-MOS Imager (IT-3000M55E/IT-3000M55U/IT-3000M56E/IT-3000M56U only) ......

E-45

Warning Label .................................................................................................. E-46

Magnetic Card Reader .................................................................................E-47

Performing Data Communication ............................................................... E-48

IR Communication ........................................................................................... E-48

RS-232C Communication (IT-3000M53E/IT-3000M54E2 only) .................... E-48

Bluetooth

Communication .............................................................................. E-49

Resetting the Handheld Printer Terminal ...................................................E-50

Performing a Full Reset (Initialization) ............................................................ E-51

IT-3000 Specifications ..................................................................................E-52

Using the Bridge Satellite Cradle (HA-B61IO) ........................................... E-54

IT-3000_E_P14_15.p65 07.10.16, 15:1014

E-15

General Guide ................................................................................................... E-54

Connecting the AC Adaptor and Connecting to a Computer ............................ E-56

Configuring DIP Switch Settings ..................................................................... E-58

Connecting Multiple Bridge Satellite Cradles (HA-B61IO) ............................ E-59

Bridge Satellite Cradle (HA-B61IO) Specifications ........................................ E-60

Using the Cradle-type Battery Charger (HA-B30CHG) ............................. E-61

General Guide ................................................................................................... E-61

Connecting the AC Adaptor for the Cradle-type Battery Charger .................... E-63

Cradle-type Battery Charger (HA-B30CHG) Specifications ........................... E-64

Using the AC Adaptor (AD-S10095AE/AU) ................................................. E-65

Specifications.................................................................................................... E-66

Using PC Cards ............................................................................................E-67

Attachment of PC Card Removal Tape to a PC Card ....................................... E-67

Inserting a PC Card (When Using the Roll Paper Holder) ............................... E-67

Inserting a PC Card (When Using the Paper Holder) ....................................... E-69

Using SD Memory Cards ............................................................................. E-72

Inserting an SD Memory Card.......................................................................... E-72

Removing an SD Memory Card ....................................................................... E-72

Connecting a Bar Code Reader (IT-3000M53E/IT-3000M54E2 only) .........E-73

Connecting the bar code reader ........................................................................ E-73

Attaching the Screen Protect Cover ........................................................... E-74

Attaching the Splash Protect Cover ...........................................................E-75

Using the Battery Pack ................................................................................E-77

Battery Pack Specifications .............................................................................. E-77

IT-3000_E_P14_15.p65 07.10.3, 5:35 PM15

E-16

Be sure to perform the following steps before trying to use the Handheld Printer

Terminal for the first time.

1. When unpacking, make sure that everything is included.

Open the box and make sure that all the items shown here are included.

2. Charge the battery pack.

Use the AC Adaptor (AD-S10095AE/AU), Cradle-type Battery Charger or Bridge

Satellite Cradle to charge the battery pack. When charging the battery pack with these

options, first install the battery pack in the Handheld Printer Terminal. For

information about use of the options, see pages 54, 61 and 65.

Handheld Printer Terminal

Stylus

Hand strap

Battery pack

Roll paper

Neck strap and stylus holder

PC card fixers

User's Guide (this manual)

58mm Paper Width Adjuster

PC Card Remover (2 pcs)

Before Getting Started

Neck strap rings

IT-3000_E_P16_32.p65 07.10.3, 5:36 PM16

E-17

3. Load the battery pack into the Handheld Printer Terminal.

1 Turn the battery pack cover lock

switch on the side of the Handheld

Printer Terminal to the “FREE”

position.

Open the battery pack cover.

3 Install the battery pack(DT-9723LIC).

Push it all way to the end inside the

compartment until the eject button at

the front of the battery compartment

comes up (and sounds).

Make sure the battery pack is aligned

correctly when you install it.

4 Return the battery pack cover to its

original position as shown in the

illustration, and then turn the battery

pack cover lock switch to the

“LOCK” position.

IT-3000_E_P16_32.p65 07.10.3, 5:36 PM17

E-18

4. Hold down the power key for about one

second to turn on the power. Start up

the application you want to run.

Before Getting Started

IT-3000_E_P16_32.p65 07.10.3, 5:36 PM18

Page is loading ...

Casio IT-3000 User manual

Casio IT-3000 User manual

Related papers

Other documents