ADTRAN 1440882G1 Datasheet

Category
Network transceiver modules
Type
Datasheet
jobAid
DESCRIPTION
TheSmallFormFactorPluggable3.125GigabitEthernet40km
(SFP)isasinglemodefiberSFPthatplugsintoamodule
designedtoacceptSFPs.TheSFPprovidesadualopticalinterface
tothe3.125GigabitEthernetphysicalinterface.Installedintoan
appropriatemodule,theSFPprovidesa3.125Gigabit
Ethernet
interfacetothesupportingsystem.
ThisSFPshouldnotbeusedinapplicationsrequiringstandard
Gigabit(1000Base)Ethernetservices.
NOTE
Toensurecompatibility,refertothedocumentationprovided
withthehostmodule.
ThefollowingfeaturesaresupportedontheSFP:
3.125GigabitEthernetdatarate
1310nmTransmitter
Wavelength:1200‐1620nm
Opticaldistance:40kmmaximum
CAUTION
!
Duetocompliancecertificationrequirements,useonly SFPs
suppliedbyADTRANwiththehostmodule.ADTRANcannot
certifysystemintegritywithotherSFPs.
SPECIFICATIONS
OpticalSpecifications:
Opticaltransmitlevel:–2dBmto+3dBm
Receivepower:–27dBmto–9dBm
Opticalconnectors:LC
SFP8472Diagnosticcompliant
Small Form-Factor Pluggable 3.125
Gigabit Ethernet 40 km
CompatiblewithSFPMSA
ExtendedEnvironmentalSupport:
Operationaltemperaturerange:–40°Cto+65°C
Storagetemperaturerange:–40°Cto+85°C
Relativehumidityto95%,noncondensing
INSTALLATION
ToinstalltheSFPintoanappropriatemodule,completethe
followingsteps:
1. InspecttheSFP.Ifdamaged,fileaclaimwiththecarrierand
thencontactADTRANCustomerSupport.
CAUTION
!
DonotremovetheprotectiveendcapfromtheSFPuntilthefiber
opticcableisreadytobeconnected.
2. InserttheSFPintotheSFPcageonthemodule.Ensurethat
themanufacturerslabelontheSFPisfacingupwardfor
correctinstallation.
3. SlidetheSFPallthewayintothereceptacleuntilthereisan
audible“click”.
NOTE
ThelatchontheSFPisusedtoremovetheSFPfromthecageon
thecircuitcard.
SAFETY AND REGULATORY COMPLIANCE
CAUTION
!
ElectrostaticDischarge(ESD)candamageelectronicmodules.
Whenhandlingmodu les,wear anan tis ta ti cdischargewrist
straptoprevent damageto electro niccomponents.Place
modulesinantistaticpackingmaterialwhentra nsportingor
storing.Whenworkingonmodules,alwaysplacethemonan
approvedantistaticmatthatiselectricallygrounded.
TheSFPme ets orexceedsallthe applicablerequirementsof
NEBS,TelcordiaGR63 CORE,GR1089CORE,and ETSIEN
300368.TheSFPisintendedfordeploymentin CentralOffice
typefacilities, EEEs ,EECs ,and locationswheretheNEC
applies(forexample,Customer P remises). TheSFPistobe
installedinADTRAN
productsinRestrictedAccessLocations
only,andinstalledbytrainedservicepersonnel.
CLEI: VAUIAMJP_ _
Product P/N: 1440882G1
Issue Date: October 2010
Document P/N: 61440882G1-22B
C A U T I O N
C A U T I O N
!
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
Warranty: ADTRAN will replace or repair this product within the warranty period if it does not
meet its published specifications or fails while in service. Warranty information can
be found online at www.adtran.com/warranty
.
©2010 ADTRAN, Inc. All Rights Reserved.
ADTRAN CUSTOMER CARE:
From within the U.S. 1.800.726.8663
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807
*61440882G1-22B*
ThisdevicecomplieswithPart15oftheFCCrules.Operationis
subjecttothefollowingtwoconditions:
1. Thisdevicemaynotcauseharmfulinterference
2. Thisdevicemustacceptanyinterferencereceived,including
interferencethatmaycauseundesiredoperation.
ChangesormodificationsnotexpresslyapprovedbyADTRAN
couldvoidtheuserʹs
authoritytooperatethisequipment.
CAUTION
!
PerGR1089COREtheADTRANsystemthattheSFPisbeing
deployedinisdesignedandintendedforinstallationaspartof
aCommonBondingNet work(CBN).TheADTRANsystem
thattheSFPisbeingdeployedinisnotdesignednorintended
forinstallationaspartofanIsolatedBondingNetwork(IBN).
PerGR1089CORESection9,theSFPdoesnothaveaninternal
DCconnectionbetweenbatteryreturnandframeground.The
SFPcanbeinstalled inaDCI(isolated)orDCC(common)
installation.Forinstallationswhereothercardsorthehost
systemhaveinternalconnectionsbetweenbatteryretu rnand
frame
ground,thesystemwouldbeintendedfordeployment
onlyinaDCCinstallation.
TheADTRANsystemchassisframegroundterminalmustbe
connectedtoareliable earth groundto ens urethatthemetal
enclosureoftheSFPisproperlygroundedviathebackplane
connector.
CAUTION
C
TheSmallFormFactorPluggable3.125GigabitEthernet40kmis
aClass 1 Laser Productand complieswiththeLas erSafety
requirementsofFDA21CFR1040.11,EN608251,andEN608252.
TheSFP isNRTL Listed and CB Certifi edtoall applicable
AmericanandEuropeansafetystandards.
NOTE
TheGig a bit Ethernetpor t( s)areoptica l andthereforearenot
classifiedasanytypeofportasdefinedinAppendixBofGR
1089COREIssue4.
ThisSFPiscompliantwithSFF8472“DigitalDiagnostics
MonitoringInterfaceforOpticalTransceivers,Revision9.3.
ThisSFPiscomp liant withthe SmallFormFactorPluggable
(SFP)MultiSourceAgreement(MSA).
This SFP is designed to be de ployed in GR 3108CORE
environmentalclass1or2asdefinedinGR3108COREIssue2.
TheSFPisdesignedtomeetthefollowingenvironmentalclasses:
ETSIEN30001911“Classificationofenvironmental
conditions;Storage,”Class1.2
ETSIEN30001912“Classificationofenvironmental
conditions;Transportation,”Class2.3
ETSIEN30001913“Classificationofenvironmental
conditions;Stationaryuseatweatherprotectedlocations,”
Class3.3
Theequipmentisdesignedtofunctionwithoutdegradation
duringexposuretoalltestseveritiesperClass3.3.
TheSmallFormFactorPluggable3.125GigabitEthernet40km
meetsEURoHSDirective2002/95/ECand/orapplicable
exemp
tions.Refertowww.adtran.comforfurtherinformationonRoHS/
WEEE.
  • Page 1 1
  • Page 2 2

ADTRAN 1440882G1 Datasheet

Category
Network transceiver modules
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI