Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Required Tools: (Not included)
Note the arrangement of the hardware sequence.
9-4 Locknut
9-3 Washer
Front Fork
9-2 Spacer
Wheel
9-2 Spacer
Front Fork
9-3 Washer
9-1 Axle Bolt
9-2
9-2 9-1
9-3
9-4
ATTENTION: Charge battery 12 hours before using.
A. 14 mm wrench B. 17 mm wrench
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using 14 mm and 17 mm wrench loosen the locknut;
slide axle bolt out and remove front wheel. Insert the
new wheel and tighten the locknut.
RSF350 FRONT WHEEL
REPLACEMENT INSTRUCTIONS
PART # W15128001049
WARNING: Failing to properly adjust and
tighten the nuts and bolts that affix the front wheel
can cause you to lose control and fall.