COLLINGWOOD SL240 User manual

Type
User manual

COLLINGWOOD SL240 is a mains-powered spike light designed for outdoor use. It features a sleek and modern design with two adjustable heads, allowing you to direct the light exactly where you need it. With an input power of 11.4W and a bright LED output, this spike light is energy-efficient while providing ample illumination. It's perfect for illuminating pathways, gardens, or other outdoor areas, enhancing both safety and aesthetics. Installation is simple, with the included mounting spikes and a flying lead for easy connection to your mains supply.

COLLINGWOOD SL240 is a mains-powered spike light designed for outdoor use. It features a sleek and modern design with two adjustable heads, allowing you to direct the light exactly where you need it. With an input power of 11.4W and a bright LED output, this spike light is energy-efficient while providing ample illumination. It's perfect for illuminating pathways, gardens, or other outdoor areas, enhancing both safety and aesthetics. Installation is simple, with the included mounting spikes and a flying lead for easy connection to your mains supply.

INSTALLATION
1. Screw the two mounting spikes supplied into the
holes provided in the body of the product.
2. Push the spikes into the ground.
3. Connect a mains supply to each product.
Note: In wet or damp areas, suitable IP rated
connectors or junction boxes must be used.
INSTALLATION DATA
This unit must be wired by a qualified electrician
or suitable competent person.
Flying lead; Brown = Live,
Blue = Neutral, Green/Yellow = Earth.
Rated voltage 220-240V AC.
Input power 11.4W
Input current 0.06A.
Inrush current 120A, 0.037ms.
t +44 (0) 1604 495 151 f +44 (0) 1604 495 095
e sales@collingwoodgroup.com w collingwoodlighting.com
EN
FR t +33 (0) 4 816 816 10 f +33 (0) 4 816 816 11
e ventes@collingwoodgroup.com w collingwoodlighting.com CWI 8150 V2
EN FR DE
STRAIGHT TO MAINS TWIN BAR SPIKE LIGHT
BARRE À DEUX PIQUETS 230V
NETZ LED SPIKE LIGHT (ERDSPIESS) 230V
Instructions/Consignes d’installation
INSTALLATION
1. Vissez les tiges aux hauts des piquets en utilisant
les trous prévus
2. Enfoncez chaque produit dans le sol
3. Connectez chaque produit au secteur
Note: dans les zones humides ou mouillées,
utilisez des connecteurs ou des boites de
raccordement étanches
DONNÉES D’INSTALLATION
Ce produit doit être branché par un électricien
professionnel ou une personne qualifiée
Câble d’alimentation: Marron = Phase,
Bleu = Neutre, Vert/Jaune = Terre
Tension d’entrée 220-240V AC
Puissance d’entrée 11,4W
Courant d’entrée 0,06A
Courant d’appel 120A 0,037ms
INSTALLATION
1. Schrauben Sie die zwei mitgelieferten Spieße in
die dafür vorgesehenen Löcher im Produkt.
2. Drücken Sie die Spieße in den Boden.
3. erbinden Sie jedes der
Produkte mit dem Stromnetz.
Hinweis: In nassen oder feuchten Umgebungen
müssen geeignete IP-konforme Stecker oder
Anschlussdosen verwendet werden.
INSTALLATION DATA
Dieses Gerät muss von einer Elektrofachkraft
oder einer ähnlich ausgebildeten Person
angeschlossen werden.
Kabelanschlüsse: Braun = Strom,
Blau = Neutral, Grün/Gelb = Erde.
Nennspannung 220 – 240V Wechselstrom
Eingangsleistung 11,4W
Eingangsstrom 0,06A
Einschaltstrom 120A, 0,037ms
  • Page 1 1

COLLINGWOOD SL240 User manual

Type
User manual

COLLINGWOOD SL240 is a mains-powered spike light designed for outdoor use. It features a sleek and modern design with two adjustable heads, allowing you to direct the light exactly where you need it. With an input power of 11.4W and a bright LED output, this spike light is energy-efficient while providing ample illumination. It's perfect for illuminating pathways, gardens, or other outdoor areas, enhancing both safety and aesthetics. Installation is simple, with the included mounting spikes and a flying lead for easy connection to your mains supply.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI