- 1 -
Item No. 208256
SMARTPHONE TV SCREEN MAGNIFIER
User Guide
Thank you for purchasing the Smartphone TV Screen Magnifier. Please take a moment to read
this guide and store it for future reference.
- 2 -
INTRODUCTION
The Smartphone TV Screen Magnifier turns your phone into a 12” display screen for easier viewing.
Simply pair your phone with the wireless speakers to enjoy a more cinematic experience for your
favorite movies, videos and games.
FEATURES
• Magnifies your smartphone screen
• Accommodates most smartphones
• Dual 5W wireless speakers
• Bluetooth 5.0
• 12” curved screen provides a more cinematic experience
• Dimensions: 10” L x 8.1” W x 1.9” H
• Weight: 1.2 lbs.
• Battery Capacity: 1800mAh
• Charge time: 3-4 hours
• Charges via USB
DESCRIPTION OF PARTS (1)
1. Left Speaker
2. Answer/Hang Up Phone (Short press)
3. Volume – / Previous (Long press to decrease volume. Short press to skip back to previous
track.)
4. Power ON/OFF (Long press 3 seconds)
5. Volume + / Next (Long press to increase volume. Short press to skip ahead to next track.)
6. Play / Pause (Short press)
7. Right Speaker
8. Silicone Suction Cups
- 3 -
DESCRIPTION OF PARTS (2)
9. Charging port
10. Charging indicator
11. Magnifier lens
12. Magnifier base
13. Base brackets
SETTING UP THE SCREEN
1. Place the Smartphone TV Screen Magnifier on a flat surface and expand as shown.
2. Place your smartphone into the holder.
3. To get the best picture possible you may need to do the following:
• Adjust the angle of the screen.
• Adjust the angle of the phone.
• Adjust the distance between the screen and the phone.
- 4 -
PAIRING THE SPEAKERS WITH YOUR SMARTPHONE
1. Hold down the Power ON/OFF button for 3 seconds to enter Bluetooth pairing mode.
2. Wait for “L10-L30” to appear on your Bluetooth device list. Select it to pair with your phone.
3. Adjust the volume to your comfort level with Volume + and Volume – buttons. (Long press to
adjust volume.)
USING THIS DEVICE AS A SPEAKERPHONE
When this device is paired with your phone, you can use it as a hands-free speakerphone to
answer incoming calls.
1. When a call comes in, short press the Answer/Hang Up Phone button. The caller’s voice will
be heard on the built-in Bluetooth speakers.
2. When the call is over, short press the same button to hang up.
NOTE: Your audio will automatically pause during a phone call and automatically resume at the
end of the call.
CHARGING YOUR DEVICE
• Connect the device to a USB power source.
• Please use the cable that came with this device.
• The charge time is approximately 3-4 hours.
• Disconnect the device when fully charged.
•
•
•
•
•
-
1
-
2
-
3
-
4
