Cool Mist Humidier
Owner’s Manual
R2022.11.30
Before operating this unit carefully read the contents of this manual.
Thank you for choosing the Cool Mist Humidier.
To ensure safety, please read the entire contents of this manual.
Images and parameters are for reference only and may vary from actual product
depending on the model. Images and features are subject to change.
LED Control Mist Control Power Indicator
Absorption Tube
Absorption Tube
USB C
Power Port
Oil Bottle
Misting Nozzle
Water Tank
Misting Nozzle
Figure 1 Figure 2
Precautions
• Children under the age of 10 should not use this product.
• Do not disassemble or modify this product. Doing so could create
vibrations leading to the device traveling from its intended loca-
tion or falling from a high place. It will also void the warranty.
• Only use the power adapter that came with this product. If you
choose to use a different power supply at your own risk, the pa-
rameters should not exceed 5V / 2A.
• Please use clean distilled, RO or other puried sources of water.
Clean between uses to reduce the growth of mold and bacteria.
This could be harmful to your health, create foul odors and re-
duce the operational capacity of the misting nozzles.
• Use only trusted high quality brands of essential oils. Generic or
low quality oils could lead to malfunctioning of the diffuser. Do
not add oils to the water tank, doing so could damage the misting
nozzles.
• Do not touch the nozzles directly with your hands or hard objects.
Any damage to the misting nozzles can cause it to malfunction.
• Please keep the misting nozzles clean and free of impurities. If
you nd scale or condensation on the nozzles, please carefully
clean them using a cotton swab dipped in white vinegar or alco-
hol to avoid damaging the nozzles.
Instructions for Proper Use
1. Turn the top of the humidier counterclockwise to open (Figure
3). Pour a maximum of 2.5 liters of water into the tank. Make sure
you soak both absorption tubes in water according to step 2 be-
fore proceeding. Place the top back on the humidier and rotate
it clockwise until it tightens (Figure 4).
2. Open the water tank and pull down on the absorption tubes to
remove them (Figure 5). Be careful not to lose the springs under
the absorption tubes. Soak both ends of the tubes in water for a
few seconds (Figure 6). Insert the absorption tubes back into the
humidier (Figure 7).
Figure 3 Figure 4
Figure 5 Figure 6 Figure 7
3. Press down on the cap of the essential oil bottle, release, and the
bottle will pop up (Figure 8). Pull up to remove the bottle. Pull the
cap off of the bottle. Pour up to 10 ml of oil into the bottle. (Figure
9). Press the cap back onto the bottle (Figure 10). Rotate the lid
of the bottle ensuring the notch on the lid lines up with the notch
at the base of the bottle (Figure 11). Align the notches with the
guide rib inside the humidier and press the bottle into place until
it sits ush with the top of the humidier (Figure 12,13).
Figure 8
Figure 9 Figure 11
Figure 10
Figure 12
Figure 13
Notch on bottle
Guide rib
4. Set the misting output.
d. Click once for dual spray high output mode.
e. Click twice for nozzle one output only.
f. Click three times for nozzle two output only.
g. Click four times to automatically alternate between both noz-
zles.
h. Click a fth time to turn off both misting nozzles.
5. Set the LED light mode.
d. Click once for color changing mode.
e. Click twice to stop on your favorite color.
f. Click a third time to turn the lights off.
6. The humidier will automatically turn off after 8 hours in dual
misting mode and 16 hours in all other misting modes.
To view our warranty information, privacy policy and terms and con-
ditions, please visit
https://www.airoasis.com/policies/#warranty-policy.
Warranty
Copyright © 2022 Air Oasis, LLC. All Rights Reserved.
806-373-7788
www.airoasis.com
3401 Airway Blvd.
Amarillo, TX 79118
Specications
Trouble Shooting
Model:
HF-2207
Dimensions:
5.63” x 5.63” x 9.37”
Electrical:
5V, 2-4W, 400-500mA
Weight:
1.4 lbs.
Humidity Output:
90-100mL/H
Materials:
Polymers, electronics
Tank Capacity:
2.5L
Limited Warranty:
1 Year
There isn’t any or very
little mist coming out of
misting nozzles.
1. Make sure the absorption tubes are
saturated with water by removing
them and soaking each of the two
tubes.
2. Check that the water tank is full.
3. Make sure there isn’t any mineral
build up on the misting nozzles.
The humidier won’t
power on or makes a
squealing noise.
1. Make sure the absorption tube are
saturated with water by removing
them and soaking each of the two
tubes.
2. Check that the tank is full.
3. Use only the power cord that was
provided in the box with the humidi-
er.
/
