Knightsbridge HBLR2 User manual

Brand: Knightsbridge

Model: HBLR2

Type: User manual

Knightsbridge HBLR2 is an adjustable reflector compatible with HBLR1 and HBLR2 luminaires. It easily modifies the beam angle of HBL high bay units from 120° to 80°, ensuring optimal light distribution for your specific lighting needs.

122

INSTALLATION & MAINTENANCE MANUAL

HBLR

HBLR INSTRUCTIONS_WEB.indd 1 17/11/2017 09:49

These instructions should be read carefully and retained after installation by the end user for

future reference and maintenance.

These instructions should be used to aid installation of the following products:

HBLR1 / HBLR2

GENERAL INSTRUCTIONS

SAFETY

INSTALLATION

• Installation of this product should only be carried out by a qualiﬁed electrician or competent person

to the current Building and IEE Wiring Regulations (BS7671)

• Please isolate mains prior to installation/maintenance

• Remove the 4 screws as indicated in Fig 1

• Line up the 4 round screw holes on the reﬂector with the screw holes on the luminaire

• Using the 12mm screws provided with the reﬂector, fasten down the 4 screws to secure the

reﬂector to the luminaire

• This will modify the beam angle of HBL high bay units from 120 ° to 80°

•

Fig 1

HBLR INSTRUCTIONS_WEB.indd 2 17/11/2017 09:49

WARNING

GENERAL

WARRANTY

Only 4 screws (as indicated) should be removed to install this reﬂector

The unit should be recycled in the correct manner when it reaches the end of its life. Check local

authorities for where facilities exist.

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may

damage the product.

This product has a warranty of 1 year from date of purchase. Failure to install this product in

accordance with the current edition of the IEE Wiring Regulations, improper use, or removal of the

batch codes will invalidate the warranty. If this product should fail within its warranty period it should

be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept

responsibility for any installation costs associated with the replacement product. Your statutory rights

are not affected. ML Accessories reserve the right to alter product speciﬁcation without prior notice.

HBLR INSTRUCTIONS_WEB.indd 3 17/11/2017 09:49

ML Accessories Limited

LU5 5TA

www.mlaccessories.co.uk SBNOV17_V1

HBLR INSTRUCTIONS_WEB.indd 4 17/11/2017 09:49

Knightsbridge HBLR2 User manual

Knightsbridge HBLR2 User manual

Knightsbridge HBLR2 User manual

Related papers

Other documents