2. Knightsbridge
  3. HBLR2
HBLR2

Knightsbridge HBLR2 User manual

  • Hello! I have reviewed the Installation & Maintenance Manual for Knightsbridge HBLR reflectors. This manual provides instructions on how to install the reflector to change beam angle of HBL high bay units. It also includes important safety information, cleaning guidelines, and warranty details. I'm here to answer any questions you may have about this product.
  • What is the purpose of this reflector?
    How many screws should be removed for installation?
    What kind of cleaning products may be used?
    What is the warranty period for this product?
1
122
INSTALLATION & MAINTENANCE MANUAL
HBLR
HBLR INSTRUCTIONS_WEB.indd 1 17/11/2017 09:49
2
These instructions should be read carefully and retained after installation by the end user for
future reference and maintenance.
These instructions should be used to aid installation of the following products:
HBLR1 / HBLR2
GENERAL INSTRUCTIONS
SAFETY
INSTALLATION
• Installation of this product should only be carried out by a qualified electrician or competent person
to the current Building and IEE Wiring Regulations (BS7671)
• Please isolate mains prior to installation/maintenance
• Remove the 4 screws as indicated in Fig 1
• Line up the 4 round screw holes on the reflector with the screw holes on the luminaire
• Using the 12mm screws provided with the reflector, fasten down the 4 screws to secure the
reflector to the luminaire
• This will modify the beam angle of HBL high bay units from 120 ° to 80°
•
•
•
Fig 1
HBLR INSTRUCTIONS_WEB.indd 2 17/11/2017 09:49
3
WARNING
GENERAL
WARRANTY
Only 4 screws (as indicated) should be removed to install this reflector
The unit should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may
damage the product.
This product has a warranty of 1 year from date of purchase. Failure to install this product in
accordance with the current edition of the IEE Wiring Regulations, improper use, or removal of the
batch codes will invalidate the warranty. If this product should fail within its warranty period it should
be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept
responsibility for any installation costs associated with the replacement product. Your statutory rights
are not affected. ML Accessories reserve the right to alter product specification without prior notice.
HBLR INSTRUCTIONS_WEB.indd 3 17/11/2017 09:49
4
ML Accessories Limited
LU5 5TA
www.mlaccessories.co.uk SBNOV17_V1
HBLR INSTRUCTIONS_WEB.indd 4 17/11/2017 09:49
/