connex CONNECT Smart WiFi and Bluetooth 4.5 W LED Bayonet Candle Bulb User manual

Brand: connex CONNECT

Model: Smart WiFi and Bluetooth 4.5 W LED Bayonet Candle Bulb

Type: User manual

The connex CONNECT Smart WiFi and Bluetooth 4.5 W LED Bayonet Candle Bulb offers smart lighting solutions for your home. Control your lighting remotely using the Connex Connect App on your mobile device. The bulb is compatible with both 2.4 GHz Wi-Fi networks and Bluetooth connectivity, allowing for easy setup and control. With voice assistant compatibility, you can use voice commands to turn the bulb on/off, adjust brightness, and change colors. Create schedules and automations to suit your daily routines and preferences.

SMART Wi-Fi &

BLUETOOTH

4.5 W LED BAYONET

CANDLE BULB

USER MANUAL

Thank you for purchasing your

Connex Connect Smart Tech device.

Download the Connex Connect App

from Google Play or iOS store, and connect

your Smart Tech devices to your home

2.4 GHz Wi-Fi.

One App to manage all

your Smart Tech devices from your

mobile or tablet.

Contents

What’s in the Box 4

Requirements 4

Download App 5

Plug In and Connect 6

Connect (Easy Mode) 8

Connect (AP Mode) 10

Specications 12

How To Connect 13

FAQ’s 14

System Requirements 14

CE Certication 15

Important Information 16

Cleaning & Care Instructions 16

Environmentally Friendly Disposal 17

Support 18

Warranty 19

• Smart Wi-Fi & Bluetooth LED

Candle Bulb Bayonet

• User Manual

• Voice Assistant Guide

Requirements

• Make sure you are connecting to a 2.4 GHz Wi-Fi network.

• Connex Connect won’t work on a 5 GHz Wi-Fi network.

• Have your Wi-Fi network name and password ready.

• Make sure your mobile device is running iOS® 8 or higher or

Android TM 4.1 or higher.

• Use an existing B15 light socket (depending on the bulb shape).

What’s in the Box

Download the Connex Connect App

from Google Play or iOS store.

Step 1

Connex Get the App!

Connex Connect App

Step 2

Plug In and Connect

Step 3

Plug in the Connex Connect Candle Bulb and switch on the light switch.

(The bulb will ash repeatedly, 2 x per second: Easy Mode)

How to Reset the Device

• Reset the bulb by turning it o and on 3 times. This will put the bulb

into “Easy Mode” connection, ashing 2 x per second.

• Reset again by turning o and on 3 times. This will put the bulb into

“AP Mode”, which is the back-up mode of connection, slowly ashing

once every 3 seconds.

Easy Mode Connection

Step 4

In the Connex Connect App

top right corner of the device

screen, click “+”.

Make sure the bulb is ashing

rapidly indicating “ready to

connect”.

Enter your Wi-Fi network and

password.

The Connex Connect App will

connect to your device.

If the connection fails, then try

connecting using the AP Mode.

AP Mode Connection

Step 5

AP Mode

In the Connex Connect App

top right corner of the device

screen, click “+”.

Select “AP Mode” in top corner.

Select “next” and enter your

Wi-Fi and password details.

Follow the instructions to

choose the device from your

Wi-Fi list.

The Connex Connect App will

connect to your device.

Specif ications

• App: Connex Connect

• Energy Eciency Class: A

• Average Lifetime: 15,000 Hours

• Technology: LED and WiFi

• Connectivity: WiFi 802.11bgn 2.4Ghz (WiFi 4) &

Bluetooth BLE 4.2

• Replaces (Watt): 40 W

• Wattage: 4.5 W

• Warranty: 1 Year

• Voltage: 220 / 240 V

• Dimmable: Brightness

• Socket: B15

• Light Colour: Cool White to Warm White

• Light Output (Lm): 330 Lumens

• Exact Shape: Candle Shape

Bulb Connection

FAQ’s

1. How many devices can I control?

Connex Connect App can control unlimited number of devices and

locations. Your router has a limit as to how many devices can connect

to it.

2. How do I group multiple Connex Connect devices?

You can group multiple similar devices together by room or

by location. The same device can form part of multiple groups.

From the Connex Connect App main screen, select the device you

want to group. Select edit in top right corner. Then select

“Create Group”. You can then select devices which you would like

to group and will be able to rename them.

3. How do I share devices with family and friends?

You can share devices by selecting the “Me” icon Home

Management Add Family. In order to share a family member

needs to have downloaded the Connex Connect App and registered.

4. What is the wireless range?

The range of your Wi-Fi is dependent on your home router

specications and the strength of your Wi-Fi signal.

5. Why does the bulb appear o-line?

• Ensure light switch is turned ON (the Candle light bulb should always be

ON to operate correctly).

• Make sure your Wi-Fi router is on and in range (your Connex Connect

Smart device requires a Wi-Fi signal to function correctly).

FAQ’s

6. Why can’t I connect to my Wi-Fi?

• Ensure your device and your mobile are on the same home network.

• Make sure you entered the correct Wi-Fi password during set-up.

• Ensure your Wi-Fi signal strength extends to your device location.

System Requirements

• Mobile device running iOS® 8 or higher or AndroidTM 4.1 or higher.

• An existing 2.4 GHz Wi-Fi network.

• An existing light socket B15.

CE Certif ication

This device complies with CE Radio Equipment Directive [RED] 2014/53/

EU & Restriction of Hazardous RoHS Directive 2011/65/EU. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) This device must accept any interference

received, including interference that may cause undesired operation.

Important Information

Before installing or replacing a bulb, please read and follow all instructions,

including the following.

CAUTION: Risk of electric shock or burns and use in a dry location only.

Do not install the device with wet hands or when standing on a wet or

damp surface. Suitable for use in an operating environment between

-20 ˚C and 40 ˚C (-4 ˚F and 104 ˚F). Not for use in totally enclosed

luminaries. Do not use with a dimmer. Make sure that the voltage of the

LED bulb is compatible with the main electricity supply of your country

before connecting to a bulb holder. Ensure the base of the bulb matches

the bulb holder. The LED bulb has no serviceable parts and needs to be

replaced when the light source is extinguished.

Cleaning & Care Instructions

• Before Cleaning: Ensure that your Connex Connect Candle light bulb is

not plugged into any device before cleaning or maintaining it.

• Cleaning: Wipe down the surface of your Connex Connect Candle light

bulb using a soft, slightly damp cloth.

• Do not use any harsh or abrasive cleaning chemicals or materials on your

Connex Connect Candle light bulb as doing so may damage or scratch

the surface nish.

• Do not expose your Connex Connect Candle light bulb to high

temperatures for extended periods of time.

• Do not store in temperatures over 60 °C / 140 ˚F.

Environmentally Friendly Disposal

Do not dispose of electrical appliances as unsorted municipal

waste, use separate collection facilities. Contact your local

government for information regarding the collection systems

available. If electrical appliances are disposed of in landlls or

dumps, hazardous substances can leak into the groundwater and

get into the food chain, damaging your health and well-being.

Support

Please visit us at www.connexconnect.com for answers to common

issues and to see the full selection of products. If you still have any queries

The illustrated product and specications may dier slightly from those

supplied. Connex is a trademark of SMD Technologies (Pty) Ltd. iPhone,

Apple and the Apple logo are trademarks of Apple Inc., registered in the

U.S. and other countries. App Store is a service mark of Apple Inc.

Android Google Assistant, Google Play, and the Google Play logo are

trademarks of Google Inc. Google is a trademark of Google LLC. iOS is a

registered trademark of Cisco in the U.S. and other countries and is used

under license.

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc

or its aliates. All other trademarks and trade names are those of their

respective owners.

23 Nguni Drive, Long Meadow Business Estate West, Modderfontien,

Johannesburg, South Africa, 1609.

Warranty

This Connex Connect Smart Wi-Fi LED Bulb includes a standard 12-month

limited warranty against manufacturing defects and faults. Should your

product be unboxed with any faulty parts, poor nishing or visible damage,

or fail to perform due to a manufacturing defect or poor workmanship,

please return it with your proof of purchase (till slip or invoice) to the store of

purchase for an exchange, or repair, depending on the store’s returns policy.

This warranty commences from the date of purchase. Kindly retain your

proof of purchase as well as the packaging for your warranty period.

NOTE: The Warranty does not apply to a Product that:

a) Has failed due to excessive wear and tear beyond what is

considered to be reasonable.

b) Has been misused or neglected.

c) Has been damaged accidentally or by Force Majeure including

re and ooding.

d) Has been used or operated contrary to operating or

maintenance instructions outlined in this manual.

The Store of Purchase / Seller cannot accept any returned products that

have not been returned in accordance to this warranty or which does not

follow their own Returns Policy. Please refer to the Store of Purchase / Sellers

Returns Policy for details.

Should you require any further assistance or have any questions on your

warranty, please contact the store of purchase

Page is loading ...

connex CONNECT Smart WiFi and Bluetooth 4.5 W LED Bayonet Candle Bulb User manual

connex CONNECT Smart WiFi and Bluetooth 4.5 W LED Bayonet Candle Bulb User manual

connex CONNECT Smart WiFi and Bluetooth 4.5 W LED Bayonet Candle Bulb User manual

Related papers

Other documents