atomi Qi Wireless Wake User manual

Qi Wireless Wake
atomi
Brand
atomi
Model
Qi Wireless Wake
Category
Alarm clocks
Type
User manual
Qi Wireless Wake
10W Wireless Charger + 1W Alarm Clock
Date Code: 06/19
User Manual
Need assistance?
WE
CAN
HELP
DO NOT RETURN THIS
PRODUCT TO THE STORE
Call 1-800-757-1440
Mon-Fri 9:00 a.m. - 5:00 p.m. EST (U.S.)
or email us at info@atomiusa.com
WE APPRECIATE FEEDBACK!
Please allow our customer service team to help
with any issues before you leave a review.
/atomismainc /atomi_sma @atomi.sma
Thank you for purchasing
the atomi Qi Wireless Wake
The atomi Qi Wireless Wake features Qi technology that
allows you to charge a compatible device quickly and
wirelessly through electromagnetic induction.
All you have to do is place any compatible device on the Qi
Wireless Wake to charge it.
NOTE: If a device is not Qi compatible, you will need a Qi receiver to charge the
device.
1
2
Inse the device in your Qi Wireless Wake.
Charging will begin on contact.
Plug your Qi Wireless Wake into a USB charger.
(USB charger not included)
What’s Inside
Qi Wireless Wake
Specifications
Input: 5V 2A, 9V 1.67A
Output: 5V 1A, 9V 1.1A, 11W Max
Charging Your Wireless Device
Please use QC 2.0 or higher adapter to enable fast charge.
Blue light:
Your device is charging.
Green light:
Your device is fully charged
and is in standby mode.
Reading the Indicator Lights
NOTE: For iOS® devices, the green light
indicating a full charge will not turn on.
Light activates when phone is inseed and
begins charging. Glowing light slowly cycles
between high light to low light while charging.
Alarm
The alarm icon indicates alarm setup is on.
At the set time, the alarm will sound for 1 minute
(60 seconds).
Press clock set once to turn OFF alarm.
The alarm will turn o automatically aer 1 minute if
no buon is pressed.
Snooze
While the alarm is sounding, press the snooze buon to
temporarily silence the alarm for 5 minutes.
The alarm will repeat for 1 minute aer 5 minutes of standby.
Screen Brightness
When the alarm is not ringing, press snooze to adjust screen
brightness (strong, middle & weak).
Rotating scroll wheel adjusts alarm and time
Seing Up Your Clock
12:34PM
5:27 AM
Press clock set buon for 3 seconds to adjust alarm and
clock time with scroll wheel, press clock set again to set time.
Clock time blinks while adjusting.
Steps
a) Press and hold clock set for 3 seconds to set up time.
b) 1st press for alarm hour setup, 2nd press for alarm minute
setup, 3rd press for hour setup and 4th press for minute
setup. Scroll wheel to adjust. Press clock set to confirm and
move on to next step. Returns back to normal mode if no
action is made aer 15 seconds.
For questions or concerns, email us at inf[email protected]
Manufactured and marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001
atomi™ is a trademark of Atomi Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from the date of purchase
against defects in material and workmanship.
Safety Information
Taking care of your Qi Wireless Wake will protect your warranty
coverage. Here is how to properly care for your atomi Qi
Wireless Wake:
• Keep it dry—any moisture, including humidity, can
corrode electronic circuits.
• Do not use your Qi Wireless Wake if it gets wet. Wait until it
dries.
• If the Qi Wireless Wake is damaged in any way, do not use it.
• Keep it free from dust —dust can damage pas and
electronic components.
• Do not store in cold temperatures as moisture can form
inside the charger when it warms up to room
temperature/charge.
• Do not modify the Qi Wireless Wake in any way.
• Never drop, knock or shake the Qi Wireless Wake. This
could break internal circuit boards and mechanics.
• Always clean your Qi Wireless Wake with a so, clean dry
cloth.
Alarm
The alarm icon indicates alarm setup is on.
At the set time, the alarm will sound for 1 minute
(60 seconds).
Press clock set once to turn OFF alarm.
The alarm will turn o automatically aer 1 minute if
no buon is pressed.
Snooze
While the alarm is sounding, press the snooze buon to
temporarily silence the alarm for 5 minutes.
The alarm will repeat for 1 minute aer 5 minutes of standby.
Screen Brightness
When the alarm is not ringing, press snooze to adjust screen
brightness (strong, middle & weak).
Caution
If you have an implanted medical device, including
pacemaker, implanted cardioveer defibrillator, etc., you
should:
• Keep the Qi Wireless Wake more than 6 inches away from
the medical device.
• Unplug the Qi Wireless Wake if you think it is inteering
with your medical device.
• Follow the directions that came with your medical device.
Steps
a) Press and hold clock set for 3 seconds to set up time.
b) 1st press for alarm hour setup, 2nd press for alarm minute
setup, 3rd press for hour setup and 4th press for minute
setup. Scroll wheel to adjust. Press clock set to confirm and
move on to next step. Returns back to normal mode if no
action is made aer 15 seconds.
Aention
Pas of the Qi Wireless Wake are magnetized. Do not put
credit cards or other magnetic storage devices near the Qi
Wireless Wake as information may be erased.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

atomi Qi Wireless Wake User manual

Qi Wireless Wake
atomi
Brand
atomi
Model
Qi Wireless Wake
Category
Alarm clocks
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents