Nilfisk-Advance GWD 350 is a powerful vacuum cleaner for professional use. It is equipped with a double motor and a HEPA filter, making it ideal for cleaning up even the finest dust particles. The GWD 350 is also very versatile, with a range of attachments that allow it to be used for a variety of cleaning tasks.
Some of the key features of the Nilfisk-Advance GWD 350 include:
- Double motor for powerful suction
- HEPA filter for capturing even the finest dust particles
- Versatile range of attachments for a variety of cleaning tasks
- Lightweight and easy to manoeuvre
- Durable construction for long-lasting use
Nilfisk-Advance GWD 350 is a powerful vacuum cleaner for professional use. It is equipped with a double motor and a HEPA filter, making it ideal for cleaning up even the finest dust particles. The GWD 350 is also very versatile, with a range of attachments that allow it to be used for a variety of cleaning tasks.
Some of the key features of the Nilfisk-Advance GWD 350 include:
- Double motor for powerful suction
- HEPA filter for capturing even the finest dust particles
- Versatile range of attachments for a variety of cleaning tasks
- Lightweight and easy to manoeuvre
- Durable construction for long-lasting use
BOOK B
B 5.9.5
04-08
3
GD 320
SERVICE MANUAL
Refit parts in reversed order.
Test after repair
After repair, please check that the
vacuum cleaner is functioning to
Nilfisk specifications and to any
local authorised precautions.
NOTE! Observe correct operator
protection in accordance with
regulations against material kept in
the HEPA-filter - if fitted.
Disconnect the vacuum cleaner
from the power supply before
starting the work!
To be performed by a skilled
or instructed person only!
Tools needed:
1 Torx T 20 Screw-driver
1 Flat plier
1 Slotted Screw-driver
Torque wrench settings:
Screws at motor top: 0.9 Nm
WIRING DIAGRAM GD 320 - DOUBLE INSULATED VERSIONS
WHEN REPLACING FAN UNIT
Always mount the fan unit so
that the carbon brush holder
is pointing in the MACHINE
LONGITUDINAL DIRECTION,
MASKINENS LÄNGDRIKTNING,
LÄNGENTREU VON DER
MASCHINE.
BOOK B
B 5.9.5
04-08 SERVICE MANUAL
GWD 320, GWD 335 5
Refit parts in reversed order.
Test after repair
After repair, please check that the
vacuum cleaner is functioning to
Nilfisk specifications and to any
local authorised precautions.
To be performed by a skilled
or instructed person only!
Tools needed:
1 Torx T 20 Screw-driver
1 Flat plier
1 Slotted Screw-driver
Screws: Combi Torx T 20
Torque wrench settings:
Screws at motor top: 0.9 Nm
WIRING DIAGRAM GWD 320, GWD 335 DOUBLE INSULATED VERSIONS
NOTE! Observe correct operator
protection in accordance with
regulations against material kept
in the HEPA-filter - if fitted.
WHEN REPLACING FAN UNIT
Always mount the fan unit so
that the carbon brush holder
is pointing in the MACHINE
LONGITUDINAL DIRECTION,
MASKINENS LÄNGDRIKTNING,
LÄNGENTREU VON DER
MASCHINE.
Disconnect the vacuum cleaner
from the power supply before
starting the work!
BOOK B
B 5.9.5
04-08
7
SERVICE MANUAL
GWD 320 CRAFTSMAN
Refit parts in reversed order.
Test after repair
After repair, please check that the
vacuum cleaner is functioning to
Nilfisk specifications and to any
local authorised precautions.
NOTE! Observe correct operator
protection in accordance with
regulations against material kept
in the HEPA-filter - if fitted.
Disconnect the vacuum cleaner
from the power supply before
starting the work!
To be performed by a skilled
or instructed person only!
Tools needed:
1 Torx T 20 Screw-driver
1 Flat plier
1 Slotted Screw-driver
Screws: Combi Torx T 20
Torque wrench settings:
Screws at motor top: 0.9 Nm
WIRING DIAGRAM GWD 320 CRAFTSMAN
Sensitive to ESD=Electrostatic
Discharge
CAUTION!
Details sensitive to electrostatic
discharge. Notice applicable
ESD-safety directions (acc. to
CECC00015).
VARNING!
Detaljer känsliga för elektrostatisk
urladdning. Iakttag gällande
ESD-skyddsföreskrifte (enl.
CECC00015).
ATTENTION!
Eléments sensibles aux décharges
électrostatiques. Respecter les
consignes de sécurité (selon
CECC00015).
ACHTUNG!
Teile reagieren empfindlich auf
elektrostaitisches Entladen.
Beachten Sie die geltenden
ESD-Schutzvorschrigten (gemäß
CECC00015).
AVISO!
Piezas sensibles a las deschargas
electrostáticas. Respete las reglas
de protección ESD (conforme
CECC00015).
VAROITUS!
Sähköstaattiselle purkaukselle
herkät osat. Noudata voimassa
olevia ESD-turvamääräyksiä(CEC
C00015).
WHEN REPLACING FAN UNIT
Always mount the fan unit so
that the carbon brush holder
is pointing in the MACHINE
LONGITUDINAL DIRECTION,
MASKINENS LÄNGDRIKTNING,
LÄNGENTREU VON DER
MASCHINE.
BOOK B
B 5.9.5
04-08
9
SERVICE MANUAL
GWD 350, GWD 375 ONE MOTOR VERSIONS
Refit parts in reversed order.
Test after repair
After repair, please check that the
vacuum cleaner is functioning to
Nilfisk specifications and to any
local authorised precautions.
NOTE! Observe correct operator
protection in accordance with
regulations against material kept
in the HEPA-filter - if fitted.
Disconnect the vacuum cleaner
from the power supply before
starting the work!
To be performed by a skilled
or instructed person only!
Tools needed:
1 Torx T 20 Screw-driver
1 Flat plier
1 Slotted Screw-driver
Screws: Combi Torx T 20
Torque wrench settings:
Screws at motor top: 0.9 Nm
WIRING DIAGRAM GWD 350 AND GWD 375 ONE MOTOR VERSION
DOUBLE INSULATED
WHEN REPLACING FAN UNIT
Always mount the fan unit so
that the carbon brush holder
is pointing in the MACHINE
LONGITUDINAL DIRECTION,
MASKINENS LÄNGDRIKTNING,
LÄNGENTREU VON DER
MASCHINE.
BOOK B
B 5.9.5
04-08
11
SERVICE MANUAL
GWD 350, GWD 375 TWO MOTOR VERSIONS
Refit parts in reversed order.
Test after repair
After repair, please check that the
vacuum cleaner is functioning to
Nilfisk specifications and to any
local authorised precautions.
NOTE! Observe correct operator
protection in accordance with
regulations against material kept in
the HEPA-filter - if fitted.
Disconnect the vacuum cleaner
from the power supply before
starting the work!
To be performed by a skilled
or instructed person only!
Tools needed:
1 Torx T 20 Screw-driver
1 Flat plier
1 Slotted Screw-driver
Screws: Combi Torx T 20
Torque wrench settings:
Screws at motor top: 0.9 Nm
WIRING DIAGRAM GWD 350 AND GWD 375 DOUBLE INSULATED TWO MOTOR VERSIONS
WHEN REPLACING FAN UNITS.
Always replace both fan units when
replacing at a two motor version.
Mount the fan units so that the
carbon brush holders is pointing
in the MACHINE LONGITUDINAL
DIRECTION, MASKINENS
LÄNGDRIKTNING, LÄNGENTREU
VON DER MASCHINE.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Nilfisk-Advance GWD 350 User manual
- Type
- User manual
- This manual is also suitable for
Nilfisk-Advance GWD 350 is a powerful vacuum cleaner for professional use. It is equipped with a double motor and a HEPA filter, making it ideal for cleaning up even the finest dust particles. The GWD 350 is also very versatile, with a range of attachments that allow it to be used for a variety of cleaning tasks.
Some of the key features of the Nilfisk-Advance GWD 350 include:
- Double motor for powerful suction
- HEPA filter for capturing even the finest dust particles
- Versatile range of attachments for a variety of cleaning tasks
- Lightweight and easy to manoeuvre
- Durable construction for long-lasting use
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Nilfisk GWD 335 Owner's manual
-
-
Flybar SPARK User manual
-
New York Brick Oven Company 105-GW-WD-G Operating instructions
-
Modular 316530 User manual
-
RJTech 10H User manual
-
Omnik Omniksol-13k-TL3 User manual
-
Zeus Appollo Z10I4KD User manual
-
Raymarine i70 Installation & Operation Instructions
-
Generac XG10000E 005802R2 Quick start guide
