Gigabyte ME33-AR0 User manual

ME33-AR0

AMD EPYC™ 8004 UP Server Board

User Manual

Rev. 1.0

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

  softwarecomponent(e.g.BMCrmware,rail-kit)compatiblewiththisproduct.

 Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents

For More Information

Forrelatedproductspecications,thelatestrmwareandsoftware,andotherinformation,pleasevisit

our website at: http://www.gigabyte.com.

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

http://esupport.gigabyte.com/ to create a new support ticket.

For any general sales or marketing enquires, you may message GIGABYTE server directly by

email: server[email protected].

- 3 -

Table of Contents

ME33-AR0 Motherboard Layout ...................................................................................... 5

Block Diagram .................................................................................................................7

Chapter 1 Hardware Installation .....................................................................................8

1-1 Installation Precautions .................................................................................... 8

1-2 ProductSpecications ...................................................................................... 9

1-3 Installing and Removing the CPU and Heat Sink ........................................... 12

1-4 Installing and Removing Memory ................................................................... 13

1-4-1 6-ChannelMemoryConguration ..........................................................................13

1-4-2 Installing and Removing the Memory Module .......................................................14

1-4-3 Processor and Memory Module Matrix Table .........................................................14

1-4-4 Memory Population Table ......................................................................................15

1-5 Installing the M.2 SSD Module ....................................................................... 16

1-6 Back Panel Connectors .................................................................................. 17

1-7 Internal Connectors ........................................................................................ 18

1-8 Jumper Settings ............................................................................................. 27

Chapter 2 BIOS Setup ..................................................................................................28

2-1 The Main Menu .............................................................................................. 30

2-2 Advanced Menu ............................................................................................. 33

2-2-1 Trusted Computing .................................................................................................35

2-2-2 PSP Firmware Versions ..........................................................................................36

2-2-3 Legacy Video Select ...............................................................................................37

2-2-4 AST2600SuperIOConguration ...........................................................................38

2-2-5 S5 RTC Wake Settings ...........................................................................................40

2-2-6 UEFI Settings .........................................................................................................41

2-2-7 Serial Port Console Redirection .............................................................................42

2-2-8 CPUConguration ..................................................................................................46

2-2-9 SIO .........................................................................................................................47

2-2-10 PCI Subsystem Settings .........................................................................................48

2-2-11 USBConguration ..................................................................................................50

2-2-12 NetworkStackConguration ..................................................................................52

2-2-13 NVMeConguration ...............................................................................................53

2-2-14 SATAConguration.................................................................................................54

2-2-15 GraphicOutputConguration .................................................................................55

2-2-16 AMDMemCongurationStatus .............................................................................56

2-2-17 TlsAuthConguration ............................................................................................57

2-2-18 RAMDiskConguration .........................................................................................58

- 4 -

2-2-19 iSCSIConguration ................................................................................................59

2-3 AMD CBS Menu ............................................................................................. 60

2-3-1 CPU Common Options ...........................................................................................61

2-3-2 DF Common Options ..............................................................................................67

2-3-3 UMC Common Options ..........................................................................................74

2-3-4 NBIO Common Options ..........................................................................................95

2-3-5 FCH Common Options .........................................................................................105

2-3-6 Soc Miscellaneous Control ...................................................................................114

2-3-7 Workload Tuning ................................................................................................... 116

2-3-8 CXL Common Options .......................................................................................... 117

2-4 AMD PBS Menu ........................................................................................... 118

2-4-1 RAS ......................................................................................................................119

2-5 Chipset Setup Menu ..................................................................................... 121

2-5-1 North Bridge .........................................................................................................122

2-5-2 Fabric Resource ...................................................................................................123

2-6 Server Management Menu ........................................................................... 125

2-6-1 System Event Log ................................................................................................127

2-6-2 View FRU Information ..........................................................................................128

2-6-3 BMCNetworkConguration .................................................................................129

2-6-4 IPv6BMCNetworkConguration .........................................................................130

2-7 Security Menu .............................................................................................. 131

2-7-1 Secure Boot .........................................................................................................132

2-8 Boot Menu .................................................................................................... 134

2-9 Save & Exit Menu ......................................................................................... 136

2-10 BIOS Recovery ............................................................................................ 137

2-11 BIOS POST Beep code (AMI standard) ....................................................... 138

2-11-1 PEI Beep Codes ...................................................................................................138

2-11-2 DXE Beep Codes .................................................................................................138

- 5 -

ME33-AR0 Motherboard Layout

5

6

4321

7

8

9

10

3535

34

3332

14

15

16

17

18

19

11

25

23 13

30

20

21

22

24

26

27

28

31

29

12

CPU0

DIMM_P0_E1

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_H0

DIMM_P0_F1

DIMM_P0_H1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_B1

DIMM_P0_A1

DIMM_P0_B0

DIMM_P0_A0

- 6 -

Item Code Description

1 SW_ID ID Button with LED

2 USB3_MLAN Sever Management LAN Port (Top)/USB 3.2 Gen1 Ports (Bottom)

3 LAN1 1GbE LAN Port #1

4 LAN2 1GbE LAN Port #2

5 COM1_VGA Serial Port(Top)/VGA Port(Bottom)

6 SYS_FAN1 System Fan Connector #1

7 SYS_FAN3 System Fan Connector #3

8 PMBUS PMBus Connector

9 ATX1 2x12 Pin Main Power Connector

10 P12V_AUX1 2x4 Pin 12V Power Connector

11 CPU_FAN1 CPU Fan Connector #1

12 U2_P0_G3A MCIO Connector (PCIe Gen4)

13 U2_P0_G3B MCIO Connector (PCIe Gen4)

14 M2_0 M.2 Slot(PCIe Gen4 x4, Support NGFF-2280/22110)

15 BAT Battery Socket

16 F_USB3_1 Front Panel USB 3.2 Gen1 Connector #1

17 FP_1 Front Panel Header

18 BP_1 HDD Backplane Board Connector

19 SYS_FAN4 System Fan Connector #4

20 SYS_FAN5 System Fan Connector #5

21 SYS_FAN2 System Fan Connector #2

22 IPMB1 IPMB Connector

23 CASE_OPEN1 Case Open Intrusion Alert Header

24 PCIe_1 PCIe x16 Slot #1(Gen5 x16)

25 PCIe_2 PCIe x16 Slot #2(Gen5 x16)

26 PCIe_3 PCIe x16 Slot #3(Gen5 x16)

27 PCIe_4 PCIe x16 Slot #4(Gen5 x16)

28 PCIe_5 PCIe x16 Slot #5(Gen5 x16)

29 PCIe_6 PCIe x16 Slot #6(Gen5 x16)

30 PCIe_7 PCIe x16 Slot #7(Gen5 x16)

31 CN_NCSI1 NCSI Connector

32 SPI_TPM TPM Connector

33 P12V_AUX2 2x4 Pin 12V Power Connector

34 LED_BMC BMC Firmware Readiness LED

- 7 -

Block Diagram

- 8 -

Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

- 9 -

Hardware Installation

1-2 Product Specications

NOTE:

We reserve the right to make any changes to the product specications and product-related

information without prior notice.

Socket

Security

Board Size ATX

304.8 x 254mm (W x D)

Socket

Security

Processor

Supported

AMD EPYC™ 8004 Series processors

Single processor, 5nm technology

Up to 64-core, 128 threads per processor

cTDP up to 225W

Socket

Security

Socket 1 x LGA 4844

Socket SP6

Socket

Security

Chipset System on Chip

Socket

Security

Memory 12 x DIMM slots

DDR5 memory supported only

6-Channel memory architecture

RDIMM modules up to 96GB supported

Memory speed: Up to 4800 MHz (1DPC), 3600 MHz (2DPC)

Socket

Security

Intergrated

Network

2 x 1Gb/s BASE-T LAN ports (1 x Broadcom® BCM5720)

NCSI function supported

1 x 10/100/1000 management LAN

Socket

Security

Intergrated

Video

Controller

Integrated in Aspeed® AST2600

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Socket

Security

Integrated SATA

Controller 2 x MCIO 8i for 16 x SATA

Socket

Security

Expansion Slots Slot_7: 1 x PCIe x16 (Gen5 x16 bus) slot

Slot_6: 1 x PCIe x16 (Gen5 x16 bus) slot

Slot_4: 1 x PCIe x16 (Gen5 x16 bus) slot

Slot_2: 1 x PCIe x16 (Gen4 x16 bus) slot

2 x M.2 slots:

- M-key

- PCIe Gen5 x4

- Supports 2280/22110 cards

Total 3 x MCIO 8i connectors:

- 2 x MCIO 8i connectors for 4 x Gen5 NVMe or 16 x SATA

- 1 x MCIO 8i connector for 2 x Gen5 NVMe

- 10 -

Hardware Installation

Socket

Security

On-Board

Connector

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

1 x 6-pin ATX 12V power connector

3 x MCIO 8i connectors

2 x M.2 slots

1 x CPU fan header

5 x System fan headers

1 x USB 3.2 Gen1 header

1 x USB 2.0 header

1 x TPM header

1 x Front panel header

1 x Backplane board header

1 x PMBus connector

1 x IPMB connector

1xClearCMOSjumper

1xBIOSrecoveryjumper

1 x Buzzer

Socket

Security

Rear I/O

Connectors

2 x USB 3.2 Gen1

1 x VGA

1 x COM

2 x RJ45

1 x MLAN

1 x ID button with LED

Socket

Security

TPM 1 x TPM header with SPI interface

Optional TPM2.0 kit: CTM010

- 11 -

Hardware Installation

Socket

Security

Board

Management

Aspeed® AST2600 management controller

GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard

HTML5 KVM

Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)

Sensor Reading History Data

FRU Information

SEL Log in Linear Storage / Circular Storage Policy

Hardware Inventory

FanProle

System Firewall

Power Consumption

Power Control

Advanced power capping

LDAP / AD / RADIUS Support

Backup&RestoreConguration

Remote BIOS/BMC/CPLD Update

Event Log Filter

User Management

Media Redirection Settings

PAM Order Settings

SSL Settings

SMTP Settings

Socket

Security

Operating

Properties

Operating temperature: 10°C to 40°C

Operating humidity: 8-80% (non-condensing)

Non-operating temperature: -40°C to 60°C

Non-operating humidity: 20%-95% (non-condensing)

Socket

Security

PSU Connectors 1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

1 x 6-pin ATX 12V power connector

- 12 -

Hardware Installation

1-3 Installing and Removing the CPU and Heat Sink

Follow these instructions to Install the CPU:

1. Loosen the captive screw securing the CPU cover.

2. Flip open the CPU cover.

3. Remove the CPU carrier from the CPU frame using the handle on the CPU carrier.

4. Using the handle on the CPU carrier insert the new CPU carrier with CPU installed into the CPU

frame.

NOTE: Ensure the CPU is installed in the CPU carrier in the correct orientation, with the triangle on

the CPU aligned to the top left corner of the CPU carrier.

5. Flip the CPU frame with CPU installed into place in the CPU socket.

6. Flip the CPU cover into place over the CPU socket.

7. Tighten the CPU cover screw to secure the CPU cover in place.

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Unplug all cables from the power outlets.

• Disconnect all telecommunication cables from their ports.

• Placethesystemunitonaatandstablesurface.

• Open the system according to the instructions.

WARNING!

Failure to properly turn off the server before you start installing components may cause serious

damage. Do not attempt the procedures described in the following sections unless you are a

qualiedservicetechnician.

Note:

• Lock the CPU by using a T20-Lobe driver to tighten 3 captive nuts in sequence as 1-3.

• The screw tightening torque: 16.1 ± 1.2 kgf-cm (14.0 ± 1.0 lbf-in).

3

1

2

1

External cap

2

3

CPU

4

5

6

7

1

3

2

- 13 -

Hardware Installation

1-4 Installing and Removing Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one

direction. If you are unable to insert the memory, switch the direction.

1-4-1 6-Channel Memory Conguration

This motherboard provides 6 DDR5 memory slots and supports 6-Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.

CPU0

DIMM_P0_E1

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_H0

DIMM_P0_F1

DIMM_P0_H1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_B1

DIMM_P0_A1

DIMM_P0_B0

DIMM_P0_A0

- 14 -

Hardware Installation

1-4-2 Installing and Removing the Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module.

Be sure to install DDR5 DIMMs on to this motherboard.

Follow these instructions to install a DIMM module:

1. Insert the DIMM memory module vertically into the DIMM slot and push it down.

2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.

3. Reverse the installation steps when you want to remove the DIMM module.

1

2

1-4-3 Processor and Memory Module Matrix Table

4 DIMM

Memory Q’ty

A0 E0 E1 F0 F1 H0 H1

A1

D0D1 B0

B1

1 DIMM

2 DIMM

6 DIMM

8 DIMM

12 DIMM

CPU0

V VV V VV

V

VV

V

VV V V

V V

V VV

V V VV

VV

V V VV

V V V V V V

V V V

- 15 -

Hardware Installation

Note:

• When only one DIMM per channel is used, it must be populated in memory slot DIMM1.

DIMM

Type

DIMM Population

DDR5 Frequency (MT/s)

DIMM 0 DIMM 1

RDIMM

-- 1R 4800

1R 1R 4000

-- 2R 4800

2R 2R 3600

1-4-4 Memory Population Table

- 16 -

Hardware Installation

1-5 Installing the M.2 SSD Module

Follow these instructions to install the M.2 device and heat sink:

1. Insert the M.2 device into the M.2 connector.

2. Press down on the M.2 device.

3. Install the thermal pad of the M.2 device to the M.2 device.

4. Press down on the thermal pad.

5. Secure the M.2 device and its thermal pad to the motherboard with a single screw.

6. Reverse steps 1-5 to remove the M.2 device.

WARNING

Installation of the thermal pad over the M.2 device is required when installing an M.2 device. Lack of

the thermal pad may result in the system overheating and throttle the system performance.

CAUTION

The position of the stand-off screw will depend on the size of the M.2 device. The stand-off screw

is pre-installed for 22110 cards as standard. Refer to the size of the M.2 device and change the

position of the stand-off screw accordingly.

14

2

3

5

- 17 -

Hardware Installation

1-6 Back Panel Connectors

uSerial Port

Connect to serial-based mouse or data processing devices.

vVGA Port

Connect to a monitor device.

w1 GbE LAN Port #2

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section

below for a description of the states of the LAN port LEDs.

x1 GbE LAN Port #1

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section

below for a description of the states of the LAN port LEDs.

yServer Management LAN Port

The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is

the dedicated LAN port for Server Management.

zUSB 3.2 Gen1 Ports

The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveetc.

{ID button with LED

Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.

LAN and ID Button LEDs

Link/Activity LED

Speed LED

LAN Port

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

ID button/LED: 10/100/1000 LAN LED:

State Description

Yellow On 1Gbps data rate

Green On 100Mbps data rate

Off 10Mbps data rate

State Description

Blue On Systemidenticationisactive

Off Systemidenticationisdisabled

1

2

34

5

7

6

- 18 -

Hardware Installation

1-7 Internal Connectors

1

2

3

4

5

3530

29

2827

9

10

11

12

13

14

6

20

18 8

25

15

16

17

19

21

22

23

26

24

7

CPU0

DIMM_P0_E1

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_H0

DIMM_P0_F1

DIMM_P0_H1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_B1

DIMM_P0_A1

DIMM_P0_B0

DIMM_P0_A0

1) SYS_FAN4 16) FP_1

2) SYS_FAN5 17) CASE_OPEN

3) P12V_PCIE 18) F_USB2

4) ATX1 19) BP_1

5) BAT 20) SYS_FAN1

6) CPU0_FAN 21) SYS_FAN2

7) PMBUS 22) SYS_FAN3

8) P12V_AUX2 23) CN_NCSI

9) P12V_ AUX1 24) IPMB

10) M2_1 25) PCIe_2

11) M2_0 26) PCIe_4

12) U2_P0_G3B 27) PCIe_6

13) U2_P0_G3A 28) PCIe_7

14) U2_P0_G2A 29) LED_BMC

15) F_USB3 30) SPI_TPM

- 19 -

Hardware Installation

Read the following guidelines before connecting external devices:

• First make sure your devices are compliant with the connectors you wish to connect.

• Before installing the devices, be sure to turn off the devices and your computer. Unplug the

power cord from the power outlet to prevent damage to the devices.

• After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

- 20 -

Hardware Installation

CPU0

DIMM_P0_E1

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_H0

DIMM_P0_F1

DIMM_P0_H1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_B1

DIMM_P0_A1

DIMM_P0_B0

DIMM_P0_A0

CPU0

DIMM_P0_E1

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_H0

DIMM_P0_F1

DIMM_P0_H1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_B1

DIMM_P0_A1

DIMM_P0_B0

DIMM_P0_A0

1/2/6/20/21/22) SYS_FAN4/SYS_FAN5/CPU0_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3 (FAN

Headers)

Themotherboardhasone4-pinCPUfanheader(CPU_FAN),andve4-pin(SYS_FAN)systemfanheaders.

Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect

it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU

fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat

dissipation, it is recommended that a system fan be installed inside the chassis.

1

PinNo. Denition

1 GND

2 +12V

3 Sense

4 Speed Control

• Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

• Thesefanheadersarenotconfigurationjumperblocks.Donotplaceajumpercaponthe

headers.

4

7) PMBus Connector

The Power Management Bus (PMBus) is a variant of the System Management Bus (SMBus) which is

targeted at digital management of power supplies.

5

1

PinNo. Denition

1 PMBus Clock

2 PMBus Data

3 PMBus Alert

4 GND

5 3.3V Sense

Page is loading ...

Gigabyte ME33-AR0 User manual

Gigabyte ME33-AR0 User manual

Related papers

Other documents