Gigabyte MZ32-AR0 User manual

MZ32-AR0

AMD EPYC™ 7003 Server Motherboard

User Manual

Rev. 3.0

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

  softwarecomponent(e.g.BMCrmware,rail-kit)compatiblewiththisproduct.

 Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents

For More Information

Forrelatedproductspecications,thelatestrmwareandsoftware,andotherinformation,pleasevisit

our website at: http://www.gigabyte.com.

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

http://esupport.gigabyte.com/ to create a new support ticket.

For any general sales or marketing enquires, you may message GIGABYTE server directly by

email: server[email protected].

- 3 -

Table of Contents

MZ32-AR0 Motherboard Layout ......................................................................................5

Block Diagram .................................................................................................................7

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions .................................................................................... 9

1-2 ProductSpecications .................................................................................... 10

1-3 Installing and Removing the CPU and Heat Sink ........................................... 12

1-4 Installing and Removing Memory ................................................................... 13

1-4-1 8-ChannelMemoryConguration ..........................................................................13

1-4-2 Installing and Removing the Memory Module .......................................................14

1-4-3 Processor and Memory Module Matrix Table .........................................................14

1-4-4 Memory Population Table ......................................................................................15

1-5 Installing and Removing the M.2 SSD Module ............................................... 16

1-6 Installing and Removing the Mezzanine Card ................................................ 17

1-7 Back Panel Connectors .................................................................................. 18

1-8 Internal Connectors ........................................................................................ 19

1-9 Jumper Settings ............................................................................................. 27

Chapter 2 BIOS Setup ..................................................................................................28

2-1 The Main Menu .............................................................................................. 30

2-2 Advanced Menu ............................................................................................. 33

2-2-1 Trusted Computing .................................................................................................35

2-2-2 PSP Firmware Versions ..........................................................................................36

2-2-3 Legacy Video Select ...............................................................................................37

2-2-4 AST2500SuperIOConguration ...........................................................................38

2-2-5 S5 RTC Wake Settings ...........................................................................................41

2-2-6 Serial Port Console Redirection .............................................................................42

2-2-7 CPUConguration ..................................................................................................46

2-2-8 PCI Subsystem Settings .........................................................................................47

2-2-9 USBConguration ..................................................................................................49

2-2-10 NetworkStackConguration ..................................................................................51

2-2-11 NVMeConguration ...............................................................................................52

2-2-12 SATAConguration.................................................................................................53

2-2-13 UEFIPOSTLOGOConguration ...........................................................................54

2-2-14 AMDMemCongurationStatus .............................................................................55

2-2-15 T1sAuthConguration ...........................................................................................56

2-2-16 Intel(R) I350 Gigabit Network Connection ..............................................................57

2-2-17 VLANConguration ................................................................................................59

- 4 -

2-2-18 MACIPv4NetworkConguration ...........................................................................61

2-2-19 MACIPv6NetworkConguration ...........................................................................62

2-3 AMD CBS Menu ............................................................................................. 64

2-3-1 CPU Common Options ...........................................................................................65

2-3-2 DF Common Options ..............................................................................................71

2-3-3 UMC Common Options ..........................................................................................76

2-3-4 NBIO Common Options ..........................................................................................91

2-3-5 FCH Common Options ...........................................................................................97

2-3-6 NTB Common Options .........................................................................................101

2-3-7 SOC Miscellaneous Control .................................................................................102

2-3-8 Workload Tuning ...................................................................................................103

2-4 AMD PBS Menu ........................................................................................... 104

2-4-1 RAS ......................................................................................................................105

2-5 Chipset Setup Menu ..................................................................................... 107

2-5-1 North Bridge .........................................................................................................108

2-5-2 Fabric Resource ...................................................................................................109

2-6 Server Management Menu ........................................................................... 110

2-6-1 System Event Log ................................................................................................112

2-6-2 View FRU Information ..........................................................................................113

2-6-3 BMCNetworkConguration .................................................................................114

2-6-4 IPv6BMCNetworkConguration ......................................................................... 115

2-7 Security Menu .............................................................................................. 116

2-7-1 Secure Boot ......................................................................................................... 117

2-8 Boot Menu .................................................................................................... 119

2-9 Save & Exit Menu ......................................................................................... 121

2-10 BIOS POST Beep code (AMI standard) ....................................................... 122

2-10-1 PEI Beep Codes ...................................................................................................122

2-10-2 DXE Beep Codes .................................................................................................122

- 5 -

MZ32-AR0 Motherboard Layout

CPU

DIMM_P0_A1

DIMM_P0_A0

DIMM_P0_B0

DIMM_P0_B1

DIMM_P0_C0

DIMM_P0_C1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_F0

DIMM_P0_F1

DIMM_P0_G0

DIMM_P0_G1

DIMM_P0_H0

DIMM_P0_H1

DIMM_P0_E0

DIMM_P0_E1

17

16

19

18

5

910

12

13

14

15

1 2 3 4

6

7

8

11

20

21

22

2324

25

26

27

30

29

28

31

32 33 34 35 36 37 38

39

40

41

42

43 44

- 6 -

Item Code Description

1 R_USB3 USB 3.0 Port

2 LAN1_2 GbE Ethernet LAN Port #1/ GbE Ethernet LAN Port #2

3 USB3_MLAN Server Management LAN Port (Top)/ USB3.0 Ports (Bottom)

4 SW_ID ID button with LED

5 MEZZ_1A/MEZZ_1B OCP Mezzanine Connector

6 COM1_VGA Serial Port (Top)/ VGA Port (Bottom)

7 SYS_FAN1 System Fan Connector #1

8 SYS_FAN2 System Fan Connector #2

9 BAT1 Battery Socket

10 ATX1 2 x 12 Pin Main Power Connector

11 CPU0_FAN CPU Fan Connector #0

12 P12V_AUX1 2 x 4 Pin Power Connector (for CPU)

13 P12V_AUX2 2 x 4 Pin Power Connector (for Memory)

14 SATA0 Slimline SAS 4i Connector (SATAIII 6Gb/s Signal)

15 SATA1 Slimline SAS 4i Connector (SATAIII 6Gb/s Signal)

16 U2_3 Slimline SAS 4i Connector (NVMe/PCIe Gen4 x4)

17 U2_1 Slimline SAS 4i Connector (NVMe/PCIe Gen4 x4)

18 U2_0 Slimline SAS 4i Connector (NVMe/PCIe Gen4 x4)

19 U2_2 Slimline SAS 4i Connector (NVMe/PCIe Gen4 x4)

20 F_USB3 Front Panel USB 3.0 Connector

21 FP_1 Front Panel Header

22 BP_1 HDD Back Plane Board Connector

23 M2_1 M.2 slot (PCIe Gen3 x4, Support NGFF-2242/2260/2280)

24 M2_2 M.2 slot (PCIe Gen3 x4, Support NGFF-2242/2260/2280)

25 CASE_OPEN Case Open Intrusion Alert Header

26 SYS_FAN5 System Fan Connector #5

27 F_USB2 USB 2.0 Header

28 SPI_TPM TPM Module Connector

29 SYS_FAN4 System Fan Connector #4

30 SYS_FAN3 System Fan Connector #3

31 COM2 Serial Port Cable Connector

32 PCIE_1 PCIe x16 Slot (Gen3 x16/x8)

33 PCIE_2 PCIe x8 Slot (Gen3 x0/x8)

34 PCIE_3 PCIe x16 Slot (Gen4 x16)

35 PCIE_4 PCIe x16 Slot (Gen4 x16)

36 PCIE_5 PCIe x16 Slot (Gen4 x8)

37 PCIE_6 PCIe x16 Slot (Gen4 x16)

38 PCIE_7 PCIe x16 Slot (Gen4 x16) switch with 4 x Slim-SAS 4i from 4 x U.2

39 SLINK3 Slimline SAS 4i Connector

40 SLINK2 Slimline SAS 4i Connector

41 SLINK1 Slimline SAS 4i Connector

42 SLINK0 Slimline SAS 4i Connector

43 IPMB IPMB Connector

44 LED_BMC BMC Firmware Readiness LED

- 7 -

Block Diagram

- 8 -

This page intentionally left blank

- 9 - Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

Hardware Installation - 10 -

1-2 Product Specications

CPU

AMD EPYC™ 7003 series processor family

Single processor, 7nm, Socket SP3

Up to 64-core, 128 threads per processor

cTDP up to 240W

Fully support 280W

NOTE: Please make sure Fan-sink supports over 280W CPU

Compatible with AMD EPYC™ 7002 series processor family

Chipset System on Chip

Memory 16 x DIMM slots

DDR4 memory supported only

8-Channel memory architecture

RDIMM modules up to 128GB supported

LRDIMM modules up to 128GB supported

3DS RDIMM/LRDIMM modules up to 256GB supported

Memory speed: Up to 3200*/ 2933 MHz

Note:

* Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC

Onboard

Graphics

Integrated in Aspeed® AST2500

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp

LAN 2 x 1GbE LAN ports (1 x Intel® I350-AM2)

1 x 10/100/1000 management LAN

Expansion Slots Slot_7: 1 x PCIe x16 (Gen4 x16 bus) slot; shared with 4 x NVMe ports

Slot_6: 1 x PCIe x16 (Gen4 x16 bus) slot

Slot_5: 1 x PCIe x16 (Gen4 x8 bus) slot

Slot_4: 1 x PCIe x16 (Gen4 x16 bus) slot

Slot_3: 1 x PCIe x16 (Gen4 x16 bus) slot

Slot_2: 1 x PCIe x8 (Gen3 x0 or x8 bus) slot

Slot_1: 1 x PCIe x16 (Gen3 x16 or x8 bus) slot; shared with slot_2

1 x OCP mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3, P4;

Type2 P5 with NCSI supported)

2 x M.2 slots:

- M-key

- PCIe Gen3 x4

- Supports NGFF-2242/2260/2280 cards

4 x NVMe ports:

- SlimSAS 4i type

- PCIe Gen4 x4 per port

- Shared with Slot_7 PCIe Gen4 x16 slot

- 11 - Hardware Installation

Storage Interface 2 x SlimSAS 4i for 8 x SATA ports

Internal I/O

Connectors

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

10 x SlimSAS connectors

2 x M.2 slots

1 x CPU fan headers

5 x System fan headers

1 x USB 3.0 header

1 x USB 2.0 header

1 x COM_2 header

1 x TPM header

1 x Front panel header

1 x HDD back plane board header

1 x PMBus connector

1 x IPMB connector

1xClearCMOSjumper

1xBIOSrecoveryjumper

1 x Buzzer

Rear I/O

Connectors

3 x USB 3.0 ports

1 x VGA port

1 x Serial port

2 x RJ45 LAN ports

1 x MLAN port

1 x ID button with LED

TPM 1 x TPM header with SPI interface

Optional TPM2.0 kit: CTM010

Board

Management

Aspeed® AST2500 management controller

GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Form Factor E-ATX

305W x 330D (mm)

GIGABYTE reserves the right to make any changes tothe product specicationsand product-related

information without prior notice.

Hardware Installation - 12 -

1-3 Installing and Removing the CPU and Heat Sink

Follow these instructions to Install the CPU:

1. Loosen the three captive screws in sequential order (1g2g3) securing the CPU cover.

2. Flip open the CPU cover.

3. Remove the CPU cap with CPU from the CPU frame using the handle on the CPU cap.

4. Using the handle on the CPU cap insert the new CPU cap with CPU installed into the CPU frame.

Note: Ensure that the CPU is installed in the CPU cap in the correct orientation, with the gold triangle

on the CPU aligned to the top left corner of the CPU cap.

5 Flip the CPU frame with CPU installed into place in the CPU socket.

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Unplug all cables from the power outlets.

• Disconnect all telecommunication cables from their ports.

• Placethesystemunitonaatandstablesurface.

• Open the system according to the instructions.

WARNING!

Failure to properly turn off the server before you start installing components may cause serious

damage. Do not attempt the procedures described in the following sections unless you are a

qualiedservicetechnician.

3

1

2

1

External cap

2

3

CPU

4

5

7

1

3

2

6

8

9

3

1

2

44

Note:

• Lock the CPU by using a T20-Lobe driver to tighten 3 captive nuts in sequence as 1-3.

• The screw tightening torque: 16.1 ± 1.2 kgf-cm (14.0 ± 1.0 lbf-in).

- 13 - Hardware Installation

1-4 Installing and Removing Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one

direction. If you are unable to insert the memory, switch the direction.

1-4-1 8-Channel Memory Conguration

This motherboard provides 16 DDR4 memory slots and supports 8-Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.

CPU

DIMM_P0_A1

DIMM_P0_A0

DIMM_P0_B0

DIMM_P0_B1

DIMM_P0_C0

DIMM_P0_C1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_F0

DIMM_P0_F1

DIMM_P0_G0

DIMM_P0_G1

DIMM_P0_H0

DIMM_P0_H1

DIMM_P0_E0

DIMM_P0_E1

Hardware Installation - 14 -

1-4-2 Installing and Removing the Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module.

Be sure to install DDR4 DIMMs on to this motherboard.

Follow these instructions to install a DIMM module:

1. Insert the DIMM memory module vertically into the DIMM slot and push it down.

2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.

3. Reverse the installation steps when you want to remove the DIMM module.

1

2

1-4-3 Processor and Memory Module Matrix Table

Processor and Memory Module Matrix Table

1 DIMMs

CPU#

CPU0 C1

2 DIMMs

CPU0 C1 D1

4 DIMMs

CPU0 C1 D1 G1 H1

8 DIMMs

CPU0 A1 B1 C1 D1 E1 F1 G1 H1

16 DIMMs

CPU0 A1A0 B1B0 C1C0 D1D0 E1E0 F1F0 G1G0 H1H0

Channel A Channel B Channel C Channel D Channel E Channel F Channel G Channel H

- 15 - Hardware Installation

Note:

• When only one DIMM is used, it must be populated in memory slot DIMM1.

EPYC Memory Speed based on DIMM Population (Two DIMM per Channel)

DIMM

Type

DIMM Population Max EPYC 7003

DDR Frequency (MHz)

DIMM 0 DIMM 1

RDIMM

-- 1R 3200

1R 1R 2933

-- 2R or 2DR 3200

1R 2R or 2DR 2933

2R or 2DR 2R or 2DR 2933

LRDIMM

-- 4DR 3200

4DR 4DR 2933

-- 2S2R (4 Ranks) 3200

-- 2S4R (8 Ranks) 3200

2S2R (4 Ranks) 2S2R (4 Ranks) 2933

2S4R (8 Ranks) 2S4R (8 Ranks) 2933

3DS

-- 2S2R (4 Ranks) 2933

2S2R (4 Ranks) 2S2R (4 Ranks) 2666

-- 2S4R (8 Ranks) 2933

2S4R (8 Ranks) 2S4R (8 Ranks) 2666

DIMM

Type

DIMM Population Max EPYC 7003

DDR Frequency (MHz)

DIMM 0

RDIMM

1R (1 Rank) 3200

2R or 2DR (2 Ranks) 3200

LRDIMM

4DR (4 Ranks) 3200

2S2R (4 Ranks) 3200

2S4R (8 Ranks) 3200

3DS

2S2R (4 Ranks) 3200

2S4R (8 Ranks) 3200

EPYC Memory Speed based on DIMM Population (One DIMM per Channel)

1-4-4 Memory Population Table

Hardware Installation - 16 -

1-5 Installing and Removing the M.2 SSD Module

Follow the steps below to install an optional M.2 SSD module on your motherboard.

Step1. Insert the M.2 SSD module into the slot.

Step2. Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.

1

2

- 17 - Hardware Installation

1-6 Installing and Removing the Mezzanine Card

Follow the steps below to install a mezzanine card on your motherboard.

Step1. Insert the mezzanine card into the system ensuring that the connector on the mezzanine card

connects to the connector on the motherboard.

Step2. Secure the mezzanine card to the system with three screws.

1

2

Hardware Installation - 18 -

1-7 Back Panel Connectors

uSerial Port

Connects to serial-based mouse or data processing devices.

vVGA Port

Connects to a monitor device.

wID button with LED

Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.

x10/100/1000 Server Management LAN Port

The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is

the dedicated LAN port for Server Management.

yUSB 3.0 Ports

The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveetc.

zRJ-45 LAN Port #1

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section

below for a description of the states of the LAN port LEDs.

{RJ-45 LAN Port #2

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section

below for a description of the states of the LAN port LEDs.

|USB 3.0 Port

The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveetc.

v

w

x

y

z

{

u

|

10/100/1000 LAN and ID Button LEDs

Link/Activity LED

Speed LED

LAN Port

ID Button/ LED:10/100/1000 LAN Speed LED:

State Description

Yellow On 1 Gbps data rate

Green On 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blue On Systemidenticationisactive.

Off Systemidenticationisdisabled.

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

- 19 - Hardware Installation

1-8 Internal Connectors

Read the following guidelines before connecting external devices:

• First make sure your devices are compliant with the connectors you wish to connect.

• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

• After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1) ATX 11) F_USB2

2) ATX_12V (for CPU) 12) COM2

3) ATX_12V (for Memory) 13) FP_1

4) CPU0_FAN 14) BP_1

5) SYS_FAN1 15) SPI_TPM

6) SYS_FAN2 16) IPMB

7) SYS_FAN3 17) LED_BMC

8) SYS_FAN4 18) BAT

9) SYS_FAN5 19) CASE_OPEN

10) F_USB3

CPU

DIMM_P0_A1

DIMM_P0_A0

DIMM_P0_B0

DIMM_P0_B1

DIMM_P0_C0

DIMM_P0_C1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_F0

DIMM_P0_F1

DIMM_P0_G0

DIMM_P0_G1

DIMM_P0_H0

DIMM_P0_H1

DIMM_P0_E0

DIMM_P0_E1

9

12

13

1

2

3

4

6

7

8

11

5

10

14

15

16

17

18

19

Hardware Installation - 20 -

1/2/3) ATX/ATX_12V (2x12 Main Power Connector and 2x4 12V Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturnedoff

and all devices are properly installed. The power connector possesses a foolproof design. Connect the power

supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies

power to the CPU. If the 12V power connector is not connected, the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

PinNo. Denition

13 3.3V

14 -12V

15 GND

16 PS_ON

17 GND

18 GND

19 GND

20 -5V

21 +5V

22 +5V

23 +5V

24 GND

PinNo. Denition

1 3.3V

2 3.3V

3 GND

4 +5V

5 GND

6 +5V

7 GND

8 Power Good

9 5VSB

10 +12V

11 +12V

12 3.3V

5

8

1

4

PinNo. Denition

1 GND

2 GND

3 GND

4 GND

5 +12V

6 +12V

7 +12V

8 +12V

CPU

DIMM_P0_A1

DIMM_P0_A0

DIMM_P0_B0

DIMM_P0_B1

DIMM_P0_C0

DIMM_P0_C1

DIMM_P0_D0

DIMM_P0_D1

DIMM_P0_F0

DIMM_P0_F1

DIMM_P0_G0

DIMM_P0_G1

DIMM_P0_H0

DIMM_P0_H1

DIMM_P0_E0

DIMM_P0_E1

ATX

ATX_12V

ATX

113

12 24

ATX_12V

Page is loading ...

Gigabyte MZ32-AR0 User manual

Gigabyte MZ32-AR0 User manual

Related papers

Other documents