2. ROOMS TO GO
  3. 23115404

ROOMS TO GO 23115404 Assembly Instructions

  • I have reviewed the assembly instructions for the ATT154E End Table. This document provides a parts list, hardware list and step-by-step guide on how to assemble the table. I'm ready to answer any questions you have about the assembly process or the included components.
  • What parts are included in the assembly?
    What hardware is needed for assembly?
    Is a screwdriver provided?
Assembly Instruction
ATT154E
END TABLE
SKU# 23115404
Thank you for your purchase. Before discarding packaging material be sure you have
located all the parts including the necessary hardware and tools listed on the instruction
sheet below.
Parts List
# 1
1pc
Top Frame
# 2
4pcs
Metal Leg
# 3
1pc
Metal Ring
# 4
1pc
Black Glass Top
Hardware List
No
Figure Description QTY
No Figure Description QT
Y
A Bolt 1/4” x 20 x1/2”
8 C Glass Tips 4
B Philips Head
3/16" x10mm 4 D 4mm Hex Allen
Wrench 1
Please do not tighten any bolt firmly before you put all of them in place.
Step 1) Put all parts on a soft surface to prevent scratches. Attach metal legs (#2) to top
frame (#1) by using bolt (A) as below shown.
HMNF
Step 2) Please note no screwdriver included in hardware package and screwdriver is
necessary for this assembly. Attach metal ring (#3) to metal legs (#2) by using Philips Head
bolt (B) as below shown then tighten all bolts firmly.
Step 3) Turn the table upside down, put glass tips (C) onto top frame (#1) then put black
glass top (#4) on as below shown carefully. Your perfect table is completed.
/