![](//vs1.manuzoid.com/store/data-gzf/52badbedef1912daef7b3d1ac5da8c4b/2/002195690.htmlex.zip/bg2.jpg)
Please do not tighten any bolt firmly before you put all of them in place.
Step 1) Put all parts on a soft surface to prevent scratches. Attach long metal legs (#2) to
big top frame (#1) by using bolt (A) as below shown.
Step 2) Please note no screwdriver included in hardware package and screwdriver is
necessary for this assembly. Attach big open frame (#3) to long metal legs (#2) by using
Philips Head bolt (B) as below shown then tighten all bolts firmly.
Step 3) Repeat as Step 1) attach short metal legs (#6) to small top frame (#5) by using bolt
(A) as below shown.